hansgrohe 15273XXX PuraVida 3-Hole Bidet Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- hansgrohe 15273XXX PuraVida 3-Hole Bidet Mixer
- Product Information
- Product Usage Instructions
- Installation
- Safety Notes
- ASSEMLING
- Technical Data
- Symbol Description
- Dimensions
- Spare parts
- Operation
- Test certificate
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 15273XXX PuraVida 3-Hole Bidet Mixer
Product Information
The product is a shower system that can be used for bathing, hygienic, and body cleansing purposes. It has a flow limiter with a maximum operating pressure of 1 MPa and a recommended operating pressure of 1.6 MPa. The hot and cold supplies must be of equal pressure. The shower system can be used with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa. The product comes with spare parts and special accessories that can be ordered separately. It has a special tool with the order code 58085000 that can be ordered as an extra. The installation kit is not included in the package.
Product Usage Instructions
Before installation, wear gloves to prevent crushing and cutting injuries. Use the product only for bathing, hygienic, and body cleansing purposes. Ensure that the hot and cold supplies have equal pressures to avoid any damage. Do not use silicone-containing acetic acid while installing the product.
Installation
Refer to page 31 of the user manual for installation instructions.
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting injuries. The shower system may only be used for bathing, hygienic, and body cleansing purposes. The hot and cold supplies must be of equal pressure.
ASSEMLING
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol Description
Do not use silicone-containing acetic acid!
Dimensions
Flow diagram
- with EcoSmart®
- without EcoSmart®
Spare parts
- XXX = Colors
- 000 = chrome plated
- 400 = white/chrome plated
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation
Cleaning
For cleaning recommendations, see the enclosed brochure.
Test certificate
CONTACT
- Hansgrohe
- Postfach 1145
- D-77761 Schiltach
- Telefon +49 (0) 78 36/51-1282
- Telefax +49 (0) 7836/511440
- E-Mail: info@hansgrohe.com.
- Internet: www.hansgrohe.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>