Ostar PVSC2500 Beverage Cooler Instruction Manual
- October 30, 2023
- Ostar
Table of Contents
Ostar PVSC2500 Beverage Cooler
Product Information
The OS-PVSC2500 is a beverage cooler designed to keep your drinks cool and refreshing. The appliance comes with a built-in compressor and fan for efficient cooling. It also has a lamp to illuminate the interior of the cooler for easy access to your beverages. The appliance has an electrical diagram, and the use of wheels and foot screws make it easy to move around.
Product Usage Instructions
- Before using the appliance, read all instructions carefully.
- Plug the appliance into an electrical outlet using the power cord.
- Turn on the appliance by using the power switch.
- Place your beverages inside the cooler, making sure not to overfill it.
- Close the door securely to ensure proper cooling.
- Adjust the temperature settings as needed using the control panel located inside the cooler.
- To maintain the appliance, use the wheels and foot screws to move it around as needed. If you need to clean the interior, unplug the appliance and remove all items before wiping it down with a damp cloth. Do not use harsh chemicals or abrasive materials to clean the cooler.
Remember to always follow safety precautions when using electrical appliances and never attempt to repair or modify the cooler yourself. If you encounter any issues with the appliance, consult the user manual or contact customer support for assistance.
TRANSPORTATION AND INSTALLATION INSTRUCTION
- When you transport the beverage cooler, the angle between the beverage cooler and the ground should be no less than 45° and you should never place the beverage cooler upside-down.
- When loading, never stand onto any of the external parts, such as the door.
- When the beverage cooler is installed or used, the entired package (including board and foam plastic) should be removed.
- Do not hold the handle when installing and moving the beverage cooler.
- Keeping the beverage cooler stable to avoid vibration and noise. The beverage cooler should be installed in the place with good ventilation. A space of a least 10cm should be kept between the surrounding wall and the cabinet wall and top panel for air circulation. Do not put object on the top panel.
- It should be placed far from heating resource an not under direct sunshine to keep the efficiency of refrigeration.
- Install the beverage cooler in dry place so as to prevent rust on the unit, which may affect the electric insulation.
CAUTIONS
- If your appliance has a ground wire, the beverage cooler must be grounded firmly. The ground wire should not be connected to the heating pipe or gaspipe.
- In case of power cord or plug is damaged, please ask the maintenance worker to change it and do not do it by yourself. Hold the plug carefully when pull or insert it. Do not pull the wire.
- Please do not use the same socket with other appliances.
- In case voltage provided by your regional power supply could not meet the rated voltage, please use a safe automatic voltage regulator.
- Connecting the plug of the beverage cooler to a socket before using, and wait for about 30 minutes to make sure the temperature inside is lowered and stable.
- Adjust the thermostat according to the actual room temperature and quantity of the foodstuff stored.
- Hot food should be stored only after it is completely cooled.
- If you place foodstuff directly on the button of beverage cooler, it may be wet by desfrost water puddle, or may be frozen. Placing shelf is suggested.
- The back wall inside of the beverage cooler is a cooling device. Foodstuff placed near the back wall may be frozen is the inside temperature was too cold.
- Once you power off the beverage cooler, you should wait for at least 5 min before plugging in again to avoid damage to the compressor.
- Packing food with plastic bag to avoid taste and odor mixing.
- Never put flammable, explosive and corrosive liquid or gas in the beverage cooler and keep it away form them.
TROUBLESHOOTING
| Trouble | Reason | Solution |
|---|---|---|
| Not cooling | • The plug does not fit the socket well. |
• The protector or the fuse has broken off
• The power is off.
| • Fit the plug well.
• Chang the fuse.
• Power on.
Big noise
| • The placing base is too soft, or the unit is inclined.
• The foot screws do not touch the floor well.
• The cabinet is too close to the wall.
• There are other objects directly touching the unit.
| • Mount wood at the bottom.
• Adjust the foot screws.
• Keep a certain distance from the wall.
• Take the objects away.
There are smells inside the unit| • The cool air exit is blocket.
• Food withstrong smell is not packed.
| • Take away the food near to the exit.
• Pack the food well.
The compressor does not stop.
| • The food temperature is too high or there too much food inside.
• Open the door too frequently or the door is not well closed .
• Placed under the direct sunshine or too close to the heat resource.
• The ventilationis not good.
| • Put the food in after cooling or reduce the quantify.
• Close the door tighly.
• Keep off the heat resource.
• Keeo certain space for ventilation.
ELECTRICAL DIAGRAM
MAINTENANCE
- Do not open the door frequently and too long to save energy.
- Never leave heavy or hot objects on top panel to avoid the beverage cooler deformed.
- Cut off the power before clianing.
- To clean the beverage cooler, please use soft cloth dampened in mild detergent . After cleaning, wipe it dry and never use multipurpase detergent and hot water.
- Use warm water to clean fruit juice stain on the door gasket in order to keep its elasticity.
- The beverage cooler should not be left unused for a long time, to stop using the beverage cooler, disconnect the main power first, and then clean the inside and leave the door open for 2-3 days to dry it.
ATTENTION
- This beverage cooler is not intended for use for young children without supervision.
- Young children should be supervised to ensure that they do not play with the appliance.
- We have a policy of continuous improvement on our products and reserve the right beverage materials and specifications without notice to confirm the specific parameters, please refer the rating label on the appliance.
The following phenomena are normal
- There is a sound of flowing water when the refrigerant is running.
- When the environment humidity is high, dew condensation occurs on the surface of the beverage cooler.
- While working, the condenser and compressor are hot.
- Thin laver of ice forming on the surface os the internal condensing plate is normal, it is to maintain the coldness, should the ice gets thicker, off the cooler and let it defrost by itself.
- The cooler is equipped with a turbofan inside, it is normal to hear the sound of the motor moving when the cooling is in progress.
USE OF WHEELS, FOOT SCREWS
- Turn the foot screw anticlockwise to extend and fix them to make the beverage cooler stable. Remember to turn the foot screws clockwise when moving the beverage cooler.
02022 Sunbeam Products, Inc. Todos los derechos reservados. El logotipo Oster™
es una marca comercial de Sunbeam Products, Inc. utilizada bajo licencia.
Fabricado, distribuido o vendido por Household Solutions S.., licenciatario
oficial de este producto. Garantia limitada de un año.
HECHO EN CHINA
@2022 Sunbeam Products, Inc. All rights reserved. The Oster™M logo is a
trademark of Sunbeam Products, Inc. used under license. Manufactured,
distributed or sold by Household Solutions S.A., the official licensee for
this product. One-year limited warranty. MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>