euromex iScope Brightfield Digital Microscope User Manual
- October 30, 2023
- euromex
Table of Contents
euromex iScope Brightfield Digital Microscope
Introduction
The iScope series has been designed with all kind of Material Sciences applications and great durability in mind. This resulted in a modern, robust and high level microscope for everyday use, equipped with excellent optical and mechanical components. Specific attention to production methods resulted also in an excellent price/performance ratio. This manual is supposed to be used together with the general manual for the iScope series supplied with this microscope. Please read the manual in full before you start working with your microscope
Components
- A. Microscope head
- B. Aperture diaphragm
- C. Field diaphragm
- D. Two slots for color filters
- E. Condenser focusing knob
- F. Brightness adjustment knob
- G. Main body of metallurgical attachment
- H. Power adapter input
Assembly of the microscope
- Loosen the clamping screw (2, A) on the iScope microscope and remove the binocular (or trinocular) head from the body of microscope
- Insert the main body of the metallurgical attachment into the upper part of the iScope and tighten the clamping screw
- Insert the binocular viewing head into the main body of the fluorescent attachment and tight the clamping screw (2, B) to fix the head.
Adjusting the Illumination
- Adjust the condenser knob (1, E) to the position where the image brightness in view is homogenous
- Adjust the field diaphragm (1, C) and aperture diaphragm (2, B)) until the two diaphragm sizes are properly selected.
- Aperture diaphragm: the aperture diaphragm (iris diaphragm) is designed for matching the objective’s numerical aperture, not to be used for adjusting brightness. Adjust the diaphragm size until it is just out of the field of view. When switching objectives, the aperture diaphragm size should be changed along with it.
- Field diaphragm: is used to reduce stray light. Adjust the diaphragm size until it is just out of the field of view for best operation.
Contact
Euromex Microscope bv
- Papenkamp 20 6836 BD Arnhem The Netherlands
- T: +31 (0) 26 323 22 11
- info@euromex.com
- www.euromex.com
All information may be changed without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>