hansgrohe Citterio 39200000 Single Lever Bidet Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- hansgrohe Citterio 39200000 Single Lever Bidet Mixer
- Product Information
- Product Usage Instructions
- Installation Instructions
- Technical Data
- Installation
- Symbol description
- Dimensions
- Spare parts
- Operation
- Cleaning
- Test certificate
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe Citterio 39200000 Single Lever Bidet Mixer
Product Information
- The product is a shower system.
- The product is available in multiple languages.
- The product comes with installation instructions and technical data.
- The product has a recommended operating pressure of 1.6 MPa.
- The product is compatible with hydraulically and thermally controlled continuous flow heaters.
- The product comes with spare parts and special accessories.
- The product should only be used for bathing, hygienic, and body cleansing purposes.
Product Usage Instructions
- Wear protective gloves during installation to avoid crushing and cutting injuries.
- Ensure that the hot and cold supplies have equal pressures.
- Do not use silicone containing acetic acid.
- Recommended hot water temperature should be followed.
- Refer to the flow diagram for installation.
- Refer to the enclosed brochure for cleaning instructions.
- Refer to the test certificate for more information.
Models
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa
- (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Installation
Symbol description
Do not use silicone containing acetic acid!
Dimensions
Flow diagram
- with EcoSmart®
- without EcoSmart®
Spare parts
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation
open
close
cold
hot
Cleaning
enclosed brochure
The QuickClean cleaning function only needs a small manual rub over to remove the lime scale from the spray channels.
Test certificate
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>