hansgrohe 10717000 AXOR STARCK X Highflow Concealed Thermostat Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
10717000 AXOR STARCK X Highflow Concealed Thermostat
Product Information
The user manual provides instructions for use and assembly in multiple languages, including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Slovenian, Estonian, Latvian, Serbian, Bulgarian, and Arabic. The manual includes safety and installation instructions, technical data such as operating pressure, recommended hot water temperature, and rate of flow, as well as information about maintenance and servicing.
The product is a shower system that can be used for bathing, hygienic and body cleansing purposes. The shower system must be installed according to valid norms and flushed and tested before use.
It is important to note that children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are also prohibited from using this shower system.
Product Usage Instructions
- Ensure that gloves are worn during installation to prevent crushing and cutting injuries.
- Install the fitting according to the valid norms and flush and test the shower system before use.
- Ensure that the hot and cold supplies are of equal pressures.
- For safety reasons, children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are also prohibited from using this shower system.
- To avoid dripping of the showerhead or spout, clean the filters regularly.
- If the water pressure is not sufficient or the temperature is too low, check if the thermostatic control needs adjusting or if the temperature control unit is dirty or calcified. Clean or replace the filter or the control unit as necessary.
- For maintenance and servicing, refer to the user manual for instructions on cleaning, adjusting, and replacing parts as necessary.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
The fitting must be installed, flushed and tested after the valid norms!
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5MPa
- Test pressure: 1,6MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
- Rate of flow by 0,3 MPa: approx. 58 l/min anti-pollution function
Maintenance
- To guarantee the smooth running of the thermostat, it is necessary from time to time to turn the thermostat from total hot to total cold.
- The mixer is equipped with non return valves. The non return valves must be checked regularly according to DIN EN 1717 in accordance with national or regional regulations (at least once a year). At this time, please also check the filter (A) situated on the BTC-thermoelement (96633000). After assembling the BTC-thermoelement, it is necessary to check the water temperature at the take off point as described under the headline „adjustment“. Before the adjustment, please check, if the warm water supply is activated and the maximum temperature of the warm water is available at the take off point.
Symbol description
Do not use silicone containing acetic acid!
Safety Function
The desired maximum temperature for example max. 42º C can be pre-set thanks
to the safety function.
Adjustment
After the installation, the output temperature of the thermostat must be
checked. A correction is necessary if the temperature measured at the output
differs from the temperature set on the thermostat.
Dimensions
Spare parts (see page 68)
XXX = Colors
- 000 chrome plated
- 090 chrome plated/gold plated 800 stainless steel optic
- 820 brushed nickel
- 830 polished nickel
Operation
Cleaning
see enclosed brochure.
Test certificate
| PA-IX| DVGW| SVGW| ACS| WRAS| NF| KIWA
---|---|---|---|---|---|---|---
10715000| 18019/II| BQ0587| X| X| X| X| X
10717000| 18019/II| BQ0587| X| X| X| X| X
16815XXX| 18019/II| BQ0587| X| X| X| X| X
17712XXX| 18019/II| BQ0587| X| X| X| X| X
17716XXX| 18019/II| BQ0587| X| X| X| X| X
18741000| 18019/II| BQ0587| X| X| X| X| X
35715800| 18019/II| BQ0587| X| X| X| X| X
34716000| 18019/II| BQ0587| | | X| X|
37711000| 18019/II| BQ0587| X| X| X| X| X
37716000| 18019/II| BQ0587| X| X| X| X| X
38715000| 18019/II| BQ0587| X| X| X| X| X
39711000| 18019/II| BQ0587| X| X| X| X| X
39716000| 18019/II| BQ0587| X| X| X| X| X
19702000| | | | | X| |
Assembly
Fault Cause Remedy
Insufficient water
- Supply pressure inadequate
- Check water pressure (If a pump has been installed check to see if the pump is working).
- Regulator filter dirty
- Clean filters
- Shower filter seal dirty
- Clean filter seal between shower and hose
Crossflow, hot water being forced into cold water pipe, or vice versa, when mixer is closed
- Backflow preventers dirty or leaking
- Clean backflow preventers, exchange if necessary
Spout temperature does not correspond with temperature set
- Thermostat has not been adjusted
- Adjust thermostat
- Hot water temperature too low
- Increase hot water temperature to 42 ºC to 65 ºC
Temperature regulation not possible
- Temperature regulator dirty or calcified
- Clean temperature regulator, exchange if necessary
- For new installations: basic body incorrectly connected (should be: cold right, hot left) or installed with 180º rotation
- Install function block turned through 180º
Safety stop button not operating
- Spring defective
- Button calcified
- Clean spring and/or button, exchange if necessary
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>