hama 00118125 FULLMOTION TV Wall Bracket Instruction Manual

00
118125 118126
TV Wall Bracket

Operating Instructions

Required tools

Installation kit

| (A1) 6×55 (x4)
---|---
| (A2) Ø10×50 (x4)
| (A3) M6 (x4)
| (B1) M6 (x4)
| (B2) Ø8×10 (x4)
| (B3) Ø8×20 (x4)
| (C1) M6x12 (x4)
| (C2) M6x20 (x4)
| (D1) M8x12 (x4)
| (D2) M8x20 (x4)
| (D3) M8x30 (x4)
| (D4) M8x45 (x4)
| (E1) M4x12 (x4)
| (E2) M4x20 (x4)
| (F1) (x1)
| (F2) (x1)

*nur enthalten bei 00118125 /only included in 00118125

Thank you for choosing Hamas product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

• TV wall bracket
• TV support arms (2x)
• Drilling template
• Cable ties
• Installation kit (see contents, Fig. 1)
• These operating instructions

Note
Please check that the installation kit is complete before installing the bracket and ensure that none of the parts arefaulty or damaged.

Safety Notes

Warning

• Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.

• It occasionally happens that the screws for attaching the terminal device to the wall bracket aretoo long.

• Please note that the supplied wall plugs for use with concrete brick and solid brick walls only.

• Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable
  fastening materials.

• If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialized dealer.

• If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.

• Never apply force during mounting. This can damage your end device or wall bracket.

• If in doubt, have this product mounted by aqualified technician -do not attempt to mount it yourself!

• Do not mount the product above locations where persons might linger.

• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.

• Youshould repeat this check at regular intervals
  (at least every three months).

• When doing so, ensurethat the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.

• Make surethat the product is loaded symmetrically.

• During adjustment, ensurethat the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.

• Maintain the necessary safety clearance around the attached load (depending on the model).

• In the event of damage to the product, remove the attached load and stop using the product.

Intended use and specifications

• The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.

Maximum load bearing
capacity:| 00118125: 40 kg
00118126: 50 kg
---|---
Screen size:| 00118125: 81.0 -165.0 cm (US: 32″ -65″)
00118126: 81.0 -213.0 cm (US: 32″ -84″)
Depth:| 00118125: 8.4 –35.1 cm
00118126: 8.4 –42.0 cm
Angle:| –/+ 15°
Pivoting range:| at 3hinges with 2double carrier arms
00118125: up to 160°
00118126: up to 150°
Wall mounting plate dimensions:| 29.7 x17.8 cm
Mounting holes:| according to the VESA standarduntil
00118125: 400×400
00118126: 600×400

Installation requirements and installation

Note
• Only mount the TV wall bracket with the help of a second person. Get the support and help you need.
• Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible
after installation.
• The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product, mount the wall bracket in a different location, buy anew TV, etc).

Warning

• This product is suitable for wall mounting only.
• Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make surethat no electrical wires, water, gas, or other lines are located at the installation location.
• Please note that the provided wall anchors are only approved for concrete and solid brick walls.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.).
• During installation, the hinges aretobeadjusted so that the TV can be moved side-to-side.
• Check whether your television is level using the included spirit level. If necessary, adjust the television plate.

Note

• Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
• Please ensurethat the bracket lays flat and evenly on the back of the television.
• Use the enclosed spacer to even out any unevenness on the back of the television.
• Ensurethat all screws have the proper length and can be mounted until they are hand-tight (see Fig. 3).

Setting and maintenance

Note
Only adjust the TV wall bracket with the help of a second person. Get the support and help you need.

• Screws do not have to be loosened for lateral movement.
• The resistance for the tilt adjustment and lateral movement can be adjusted using the corresponding screws.
• To secure, insert the carrying arms into the TV plate and tighten both of the screws.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.

Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

00118125_00118126/03.22

Documents / Resources

| hama 00118125 FULLMOTION TV Wall Bracket [pdf] Instruction Manual
00118125, 00118126, FULLMOTION TV Wall Bracket, 00118125 FULLMOTION TV Wall Bracket, TV Wall Bracket, Wall Bracket, Bracket
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>