HOME DECORATORS COLLECTION HD7840B Scoresby 22.25 in. 2-Light Matte Black Table Lamp User Guide

Item # 1008 583 513
Model # HD7840B
USE AND CARE GUIDE
TABLE LAMP

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

• This product has been manufactured with the highest standards of safety and quality.
• For energy savings, this portable light has been engineered to safely use a self-ballasted LED bulb in place of an incandescent bulb.
• Before assembling your portable light, spread all parts out on a clean surface. Inspect each part for defects that may have occurred during shipping.

DANGER: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS. Please reference the model and item numbers.

Warranty

FIVE (5) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS.

Pre-assembly

PLANNING ASSEMBLY

• Read all instructions before assembling.
• To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460.
NOTE: This product requires two 60W maximum medium base (E26) type “A” or 9W maximum medium base (E26) self-ballasted LED bulbs (sold separately).
PACKAGE CONTENTS

NOTE: A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil. For general cleaning of Tiffany shades, use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently. If a white powder appears on the soldered joints of the Tiffany shade, this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.

Assembly

1. Attaching the socket assembly
   • Pass the base (E), the flat washer (F) and the spring washer (G) through the nipple on the column (D).
   •  Secure by threading the wingnut (H) onto the nipple. Hand tighten until sung.
   •  Thread the socket assembly (C) onto the column (D). Hand-tighten until sung.
   •  As you thread the socket assembly (C) and the column (D) together, continuously pull the power cord (I) from the bottom of the base (E).

2. Attaching the stem assembly
   •  Remove the finial (1) from the stem assembly (B) and keep the finial (1) for later use.
   •  Thread the short threaded end of the stem assembly (B) onto the coupling of the socket assembly (C) . Hand-tighten until snug.

3. Attaching the shade and the light bulbs
   •  Place the shade (A) over the stem assembly (B).
   •  Secure with the previously removed finial (1).
   •  Hand-tighten until snug.
   •  Install the correct bulbs (not included) referring to fixture markings and/or labels for maximum wattage.
   •  Plug the power cord (I) into the outlet, turn on the switch and enjoy.

NOTE: Uses two 60W maximum medium base (E26) type “A” or 9W maximum medium base (E26) self-ballasted LED bulbs (sold separately).
NOTE: If the finial (1) is not snug against the shade (A), adjust the big knurled nut (2) to the proper location for the shade (A) and the finial (1).

Care and Cleaning

• Use a dry, soft cloth to dust or wipe carefully.
• Do not clean with abrasive materials, bleach, or solvents.

Troubleshooting

bulb.
The power is off.| ❑ Ensure the power supply is turned on.
The cord is not plugged in.| ❑ Ensure the cord is plugged into an outlet.
The circuit breaker is off.| ❑ Ensure the circuit breaker is set in the “ON” position.
The fuse blows or the circuit breaker trips when the light is turned on.| There is an exposed wire.| ❑ Discontinue use of the light.
❑ Check the wire connections.
❑ Contact a qualified electrician or call the Customer Care Service Team at 1-800-986-3460.

Service Parts
MODEL: HD7840B

Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.

References

• Home Decorators Collection - Home Decor - The Home Depot

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>