SYNERGEE 810032234263 Squat Rack with Pulley Instruction Manual
- October 30, 2023
- SYNERGEE
Table of Contents
SYNERGEE 810032234263 Squat Rack with Pulley
| No. | Description | Quantity |
|---|---|---|
| 1 | Stabilizer | 2 |
| 2 | Connector Beam | 1 |
| 3 | Upright | 2 |
| 4 | Pull Up Bar | 1 |
| 5 | Triangle Support Plate | 4 |
| 6 | Rectangle Support Plate | 2 |
| 7 | m1Ox75mm Bolt | 20 |
| 8 | mlO Nut | 20 |
| 9 | mlOWasher | 40 |
| 10 | Concrete Screw Assembly | 4 |
| 11 | Pulley Strap | 1 |
| 12 | Carabiner | 4 |
| 13 | Pulley | 1 |
| 14 | Cable | 1 |
| 15 | Loadable Plate Stacker | 1 |
| 16 | Straight Bar | 1 |
Required Tools
Assembling
WARNING
SERIOUS INJURY OR DEATH CAN OCCUR IF CAUTION IS NOT USED.
As with any workout equipment that involves heavy weights, there is a risk of
injury when using the Synergee Squat rack. The best way to reduce the ri: of
serious injury is to exercise caution. Follow the instructions in this manual
and familiarize yourself with all warnings on your product before using it.
Before beginning any exercise program, consult your physician. This is
especially important for persons over age 35 or persons with pre-existing
health issues.
THE MAXIMUM WEIGHT CAPACITY FOR THIS SQUAT RACK IS 750 LBS.
Do not load 750lbs or more onto this squat rack. If you consistently lift 700
lbs or more on a regular basis, consider working with our racks that can
accommodate a higher weight capacity. Furthermore, this max weight capacity is
calculated with the condition that the rack is bolted to the floor.
UTILIZE THE FLOOR ANCHORS AND MOUNTING HARDWARE
This Squat Rack comes with Floor Anchors to provide you with the safest
lifting experience. Squat Racks that are not bolted to the floor will have
their warranties nullified. All the hardware required for mounting is included
in this package with the intention that they get used.
Follow these precautions to ensure you use your Synergee Squat Rack safely:
- Read all instructions in this manual and all warnings on the product before using it. It is the responsibility of the owner to ensure that all users of this product are adequately informed of all the safety precautions.
- Use this product only as described in this manual and keep this manual handy for future reference.
- Always keep children and pets away from this product. Keep hands and feet away from moving parts.
- This product is intended for consumer use only in an indoor environment. Do not use it in a commercial, rental, or institutional setting. Keep this product indoors, away from moisture and dust.
- Place the product on a level surface, with at least 3 feet of clearance around it. To protect the floor or carpet from damage, place a mat under it.
- Install the rack properly and according to instructions. Properly tighten all parts and check their tightness regularly. If any worn or damaged parts are found, stop usage immediately. Refrain from use until the machine has been repaired.
- Make sure all locking mechanisms are properly secured before using the unit. Ensure adjustment pins function properly and they are fully engaged before placing any weight on the rack.
- Wear appropriate clothes while exercising. Do not wear lose clothes that can get caught and always wear athletic shoes while exercising.
- Do not install any fitness product near a pool, hot tub or other damp locations. Corrosion caused by installation in these locations can lead to premature failure of components, which i not covered under any warranty.
- Do not use this rack to exhaustion: stop exercising and step away from the rack if you feel faint, dizzy, or in pain.
- Create a safe workout space by always working out with someone else present. Lift with a spotter for your weighted exercises.
- Do NOT store your barbell with weight on it on the squat rack for extended periods of time. Remove weights from your bar after exercising to prevent bar bending.
- Do NOT leave your bar unevenly weighted. Keep equal weights on both sides to prevent tipping of the barbell, and avoid any injuries that can result.
- To avoid damaging parts, do not use power tools for assembly. Use hand tools and the hardware provided.
- It is highly recommended that you attach your Squat Rack to the floor using the floor anchors and the included mounting equipment. Anchoring the rack to the floor will increase the stability of the Rack, which is especially important when you are using it for heavy weight.
MAXIMUM WEIGHT CAPACITY IS 750 LBS STATIC.
IF ANY PIECES ARE MISSING, PLEASE CONTACT US IMMEDIATELY:
CUSTOMERCARE@HEARTSYNERGEE.COM
Tel: 1.855.217.7136
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>