hansgrohe Raindance E, S Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe Raindance E, S
Product Information
The product is a Raindance showerhead available in three different sizes: E 100 AIR 3jet, E 120 AIR 3jet, and E 150 AIR 3jet. The product comes with assembly instructions in 13 different languages, including English, French, Italian, Spanish, Dutch, Danish, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, and Slovenian. The product is designed to operate at a maximum pressure of 0.6 MPa and the recommended operating pressure is 1 MPa. The filter insert (A) must be used to ensure the standard flow rate and to protect the hand shower against incoming dirt by pipework. If you want a larger water flow rate, then you must usethe filter packing (B) instead of the filter insert (A). The product also comes with a brochure and cleaning instructions.
Product Usage Instructions
When using the Raindance showerhead, make sure that the streams of the shower
do not touch sensitive body parts such as your eyes. An adequate distance must
be kept between the shower and your body.
To assemble the product, refer to page 17 of the assembly instructions
provided in your preferred language. Use the filter insert (A) to ensure the
standard flow rate and protect the hand shower against incoming dirt by
pipework. If you want a larger water flow rate, then use the filter packing
(B) instead of the filter insert (A). Incoming dirt leads to defects or/and
can damage parts of the hand shower; such caused faults voids all liability
and guarantee claims. Refer to page 20 for cleaning instructions and consult
the enclosed brochure for additional information. The product is designed to
operate at a maximum pressure of 0.6 MPa and the recommended operating
pressure is 1 MPa. Make sure to follow these guidelines to ensure optimal
performance and avoid damage.
Assembly instructions
Safety Notes
Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
Assembly (see page 17)
The filter insert (A) must be used to ensure the standard flow rate and to
protect the hand shower against incoming dirt by pipework. Do you want a
larger water flow rate, then you must use the filter packing (B) instead of
the filter insert (A). Incoming dirt leads to defects or/and can damage parts
of the hand shower; such caused faults voids all liability and guarantee
claims.
Cleaning
(see page 20) and enclosed brochure
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,1 0,4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
Test certificate
(see page 17)
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com