Sullivan TD10034W Outdoor Wall Sconce Instruction Manual

Sullivan TD10034W Outdoor Wall Sconce

Product Information

The Outdoor Wall Sconce is a product that comes with a fixture and a mounting plate. The package also includes two long mounting screws, three wire nuts, and two standard-base bulbs. The product is designed to be installed on an outlet box, which is not included in the package. The estimated assembly time for the product is 25 minutes. The assembly tools required for installation are a flathead screwdriver, Phillips screwdriver, pliers, electrical tape, wire cutters, and safety glasses. Wire strippers and a step ladder are recommended but not included.

HARDWARE CONTENTS(shown actual size)

• ABA
• BBB
• CBC
• DBD

Printed in China

PACKAGE CONTENTS

• PART A Fixture
• DESCRIPTION A
• QUANTITY 1
• Long mounting x 2 screw
• Wire nut x 3
• Long mounting x 2 screw
• Mounting plate (Not actual size) x 1

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minutes. Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, Wire cutters, and Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.

Customer Service: service@24h-reply.com.

Product Usage Instructions

Before beginning assembly, ensure that all the parts are present in the package and compare them with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. 2. Attach the mounting plate (DD) to the outlet box using the two long mounting screws (CC). 3. Strip 3/4 inch of insulation from wire ends and twist the stripped ends together with pliers (not included). Connect black to black (power) and white to white (neutral). Attach copper wire to ground wire. If necessary, attach the copper ground wire to the grounded outlet box. 4. Attach three wire nuts (BB) and tape them along with the wires together. 5. Align the two screws (AA) through the holes of the backplate and fix them with screw nuts. 6. Install two standard-base bulbs into the fixture. Note: The Outdoor Wall Sconce is designed for outdoor use only and should not be used indoors. Follow all safety instructions and precautions mentioned in the instruction manual before attempting to assemble, operate or install the product.

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
   Hardware Used

   • CC Long mounting screw x 2
   • DD Mounting plate x 1

2. Strip 3/4 in. of insulation from wire ends. Twist-stripped ends together with pliers (not included), black to black (power), and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach the copper ground wire to the grounded outlet box.

   • Hardware Used
   • BB Wire nut x3
   • BB

3. Attach wire nuts (BB). Tape wire nuts (BB) and wires
   together.

   • Hardware Used
   • BB Wire nut x3
   • BB

4. Align the 2 screws(AA) through the holes of the backplate, and fix them with screw nuts.

   • Hardware Used
   • AA Long mounting screw x 2
   • DD Mounting plate x 1
   • AA

5. Install light bulb (not included). Use two 5 standard-base bulbs.

PACKAGE CONTENTS

HARDWARE CONTENTS

HARDWARE CONTENTS showed the actual size

HARDWARE CONTENTS

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• TURN OFF ELECTRICITY at the main fuse box (or circuit breaker box) before beginning installation by removing the fuse (or switching off the circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.

PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Times: 25 minutes

• Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, Wire cutters, and Safety glasses.
• Helpful Tools (not included): Wire strippers, Step ladder.

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
   Hardware Used

2. Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

3. A ttach wire nuts (BB).Tape wire nuts (BB) and wires together.
   Hardware Used

4. Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
   Hardware Used

5. Install light bulb (not included). Use two standard-base bulbs.

Customer Service:
service@24h-reply.com.

References

• Digital Services, Technology and Consulting | Reply

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>