CORDES CC-2200 Barking Dog User Manual

CORDES CC-2200 Barking Dog

Thank you for purchasing our alarm system. Please take a few minutes to read the user’s manual thoroughly and familiarize yourself and your family with its operation. Keep the manual for future reference.

Intended Use

This alarm system is equipped with a radar sensor to detect motions through doors and walls. It can be chosen between a doorbell, barking dog, or alarm. The radar reacts to motions through wood, plastic, and stone walls. The detection range is affected by the wall’s thickness. Under normal circumstances, there is no detection through a wall with more than 18 cm.

Operation: Remote

1. Open the battery compartment (16) of the remote control and insert the included battery (Type CR2032) with a positive terminal facing up.
2. Close the battery compartment afterward.

Alarm Device

This device can be operated with an adapter (12 V/DC 1 A) or 8 Batteries 1,5 V Type AA (not included).

• Adapter: Connect the adapter to the connection socket of the device
• Batteries: Insert the batteries into the battery compartment. Observe correct polarity as indicated. Replace the batteries, once the BETRIEB (Power) (6) indicator lamp gets weaker or turns off.

Note : The lifespan of the batteries can last for up to one week, as long as the device does not activate the alarm periodically.

OVERVIEW

1. Vol +
2. Vol –
3. Select
4. On/Off
5. Arm status LED
6. Power status LED
7. Speaker
8. Radar detector
9. Connection socket 12V/DC 1 A
10. Battery compartment
11. Signal LED
12. On/Off button
13. Select button
14. SOS button
15. Connection for hook
16. Battery compartment

Technical Data

• Input voltage (Adapter): 12 V/DC, 1 A (adapter)
• Input voltage (Battery): 8x 1,5 V AA battery
• Remote control: 1x 3 V CR2032
• Radar detection angle: rear: 2m Front / 5m rear, front: 6m Front / 12m rear
• Radar detection range: 15m (open area)
• Remote range: 50 m
• Standby current consumption: Device: 20 mA, Remote: 20 A
• Dynamic current consumption: Device: 500 mA – 1 A, Remote: 15 mA
• Noise level range: max. 120 dB
• Operating conditions:
• Dimensions (W x H x T): 150 x 160 x 110
• Weight: approx. 765 g
• Radiofrequency/transmitting power: Device: 5725.32-5874.80 MHz & 433.050-434.790MHz, 62.2dBm, Remote control: 433.050-434.790MHz, 2,24dBm power remote control

Radar Detection Range

The radar detection range varies based on the position of the device:

• Rear: 2m Front / 5m rear
• Front: 6m Front / 12m rear

Activate the Device and Alarm

To activate the device and alarm, follow these steps:

1. Press the On/Off button (4) to turn on the device.
2. Select the desired mode by pressing the Select button (13).
3. Adjust the volume level by pressing Vol + (1) or Vol – (2).
4. Press the On/Off button (4) again to activate the alarm.

Disposal

At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines. Remove any inserted batteries and dispose of them separately from the product. Used batteries can be returned to collection points in your municipality free of charge.

Thank you for purchasing our alarm system. Please take a few minutes to read the user’s manual thoroughly and familiarize yourself and your family with its operation. Keep the manual for future reference.

Intended use

This alarm system is equipped with a radar sensor to detect motions through doors and walls. It can be chosen between a doorbell, barking dog, or alarm. The radar reacts to motions through wood, plastic, and stone walls. The detection range is affected by the wall’s thickness. Under normal circumstances, there is no detection through a wall with more than 18 cm.

Operation

Remote
Open the battery compartment (16) of the remote control and insert the included battery (Type CR2032) with positive terminal facing up. Close the battery compartment afterwards.

Alarm device
This device can be operated with an adapter (12 V/DC 1 A) or 8 Batteries 1,5 V Type AA (not included).

Adapter :
Connect the adapter to the connection socket of the device

Batteries :
Insert the batteries into the battery compartment. Observe correct polarity as indicated. Replace the batteries, once the BETRIEB (Power) (6) indicator lamp gets weaker or turns off.
Note : The lifespan of the batteries can last for up to one week, as long as the device does not activate the alarm periodically.

Activate the device and alarm

• After connecting the device with the mains supply, the BETRIEB (Power) and AKTIV (Arm) (5) indicator lamp light up. The device is live and the alarm will be activated after 10 seconds. If you do not wish the alarm to be activated, press the An/Aus (On/Off) (4) button immediately after connecting the device to the mains in order to deactivate the alarm. The AKTIV (Arm) (5) indicator lamp turns off.
  It can be chosen between a doorbell, barking dog, or alarm.

• Choose your sound by pressing Modus (Select) (3)
  You can adjust the volume by using the buttons + / –

• (VOL + / VOL -) (1)/(2)
  Press the An/Aus (On/Off) button to activate the device. Leave the detection range within 10 seconds, as the alarm will get activated otherwise. The dog barking mode will last for about 30 seconds, the alarm sound for about 10 seconds and the doorbell will ring once.

• Press the An/Aus (On/Off) button to deactivate the alarm. The AKTIV (Arm) indicator lamp turns off.

Disposal

• Product : Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines. Remove any inserted batteries and dispose of them separately from the product.
• Batteries : You as the end user are required by law (Battery Ordinance) to return all used batteries. Disposing of them in household waste is prohibited. Used batteries can be returned to collection points in your municipality free of charge.

User’s Manual

Declaration of Conformity (DOC) Cordes Vertriebsgesellschaft mbH, Op de Solt 42, 22391 Hamburg, Germany, hereby declares that this product conforms to the 2014/53/EU directive.
The full text of the EU Declaration of conformity is available at the following internet address: www.cordes-vertrieb.de

Technical data

Remote: ≤15 mA

Noise level range| max. 120 dB
Operating conditions| 0 bis +60 °C, 20% – 85% rF
Dimensions (W x H x T)| 150 x 160 x 110
Weight| approx. 765 g
Radio frequency/transmitting power| 5725.32-5874.80 MHz & 433.050-

434.790MHz, 62.2dBm

Radio frequency/transmitting power remote control| 433.050-434.790MHz, 2,24dBm

Radar detection range

Edition English 07/2017, Version 1.1
Documentation ©2017 Cordes Vertriebsgesellschaft mbH, Germany.
All rights including translation reserved. Reproduction by any method require written approval by the editor. This publication represents the technical status at the time of printing.

References

• Cordes Vertriebsgesellschaft mbH - Home
• Cordes Vertriebsgesellschaft mbH - Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>