Astell Kern AK HC2Hi-Fi USB Dual Amplifier Cable User Manual

June 4, 2024
Astell&Kern

Astell Kern AK HC2Hi-Fi USB Dual Amplifier Cable

Package Contents

AK HC2 / iOS Adaptor / Manual / Warranty card

How to Use

  1. Connect the AK HC2 to the playback device (Smartphone, tablet PC or computer) and ensure the white LED light is on.
  2. Turn down the volume on the playback device to a minimum level.
  3. Start music playback.

4.4mm Headphone Port (Not compatible with microphones and in-line controllers) USB Type-C Plug

IMPORTANT:
Before beginning music playback, check the volume level on the playback device and reduce to a minimum level when using AK HC2. AK HC2 has a built-in amplifier making the sound output more significant than other devices at the same sound output level. It is important to start at a low volume level to protect your hearing. Depending on the playback device you are connecting to, the volume will default to the maximum output level when the AK HC2 is connected for the first time and each time thereafter. Always check the volume level on the playback device before use.

The AK HC2 cable should NOT be connected to an Astell& Kern DAP as the volume will be fixed at the maximum output when connected and cannot be adjusted on the player or AK HC2. Use with the maximum volume may severely damage hearing. Astell&Kern is not liable for any damage due to user negligence. Be sure to check the volume first when using.

Note

Compatibility

  • The product is compatible with most Android-powered smartphones and tablet PCs, and Windows 10/11 and macOS products. If you use an iOS adapter, you can connect to iOS-based devices. However, some devices may require additional manual setup.
  • The AK HC2 is not compatible with every device. Due to hardware, software and/or system requirements for some devices, compatibility issues may occur. Compatibility issues will not be accepted as a reason for exchange, refund or repair.
  • When connected to a smartphone or tablet PC, the product can play tracks without any additional driver or application installed. And you can download and use an additional APP for volume control. Search for [AK HC] and [AK USB DAC] in the Play Store and install them. These apps are only supported for the Android version.
  • When connecting the AK HC2 with a Windows PC for the first time, the computer should recognize the device and the driver should install automatically. If the computer does not recognize the device or the driver does not install correctly, the driver can be downloaded from our website. www.astellnkern.com > Support > Download.
  • Connecting to a master device using various conversion adaptors (USB-A, Micro 5 pin, etc.) may cause an unstable connection and other compatibility issues.
  • The product requires a separate paid/free player to be installed to be able to play DSD and high-quality PCM audio files on a smartphone.
  • The AK HC2 cable does not have a built-in microphone. When connecting an earphone or headphone that has a microphone or in-line controller, the AK HC2 will not be compatible with these functions of the earphone/headphone. The AK HC2 cable is built for sound output only.

Operation/System

  • The AK HC2 cable does not have a built-in battery. Power is supplied from the connected device (Android smartphone, tablet PC or computer). Power consumption may vary depending on the source and file type being played or the battery capacity of the connected device.
  • System stabilization for the AK HC2 will be available via firmware updates. For details on how to download and update the AK HC2, please refer to our website, www.astellnkern.com -> Download.

Specifications

General Specifications

Product Name AK HC2(USB-C Dual DAC Amplifier Cable)
Model Name PEE52
Body Material Aluminum
Body Color Dark Silver
DAC Cirrus Logic 43198 x 2
Sample Rate PCM: Support up to 32bit/384kHz

DSD Native: DSD64(1bit 2.8MHz), Stereo /
DSD128(1bit 5.6MHz), Stereo / DSD256(1bit 11.2MHz), Stereo
Input| USB Type-C Input (for Android™ Smartphone, Tablet PC,

Windows 10/11, iOS, mac OS)

Output| 4.4mm Headphone
Dimensions| USB Plug: 12mm[W] x 21mm[H] x 6.5mm[D]

4.4mm Headphone: 22.8mm[W] x 60mm[H] x 12.1mm[D]

Weight| about 29g

Audio Specifications

Frequency Response ±0.011dB[Condition : 20Hz ~ 20kHz]
S/N 122dB@1kHz, Balanced
THD+N 0.0004% @1kHz, Balanced
IMD SMPTE 0.0003% 800Hz 10kHz(4:1) Balanced
Output Impedance 1.5 0
Output Level 4Vrms (Condition No Load)

Design and specifications are subject to change without notice.

SDoC information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
Report No. KR22-YEF0008
Product Name AK HC2
Model Name PEE52
Type of Equipment USB-C Dual DAC Amplifier Cable

Responsible Party – U.S. Contact Information

Company Name Invixion Inc.
Address 19600 Fairchild Road, Suite 125 Irvine, CA 92612
Telephone 949-336-4540
Contact name

support@theinvixion.com

Limited Warranty Statement

THIS WARRANTY CARD IS VALID ONLY FOR SERVICE ON PRODUCTS PURCHASED IN EU AND NON-EU EUROPEAN COUNTRIES. For other countries, please contact the Store/Dealer where purchased.

Thank you for purchasing a Dreamus Company product. All Dreams Company products come with a one-year limited warranty against defects in materials and workmanship from the original date of purchase from an authorized agent. Dreamus Company’s warranty covers only those defects which arise as a result of the normal use of the product. And the  customer shall NOT have any claim under this warranty for repair or adjustment expenses if

  1. The product is repaired or altered unless done or approved by Dreamus Company.
  2. The problem is caused by using in violation of any operating or handling instructions provided by Dreamus Company.
  3. The problem Is caused by unusual physical or electrical stress. misuse, abuse power shortage, or negligence.
  4. The problem Is caused by a nre or other natural calamity.
  5. The warranty period has expired.

Warranty Period

Dreamus Company product Duration of Limited Warranty

EU Countries Non-EU Countries

  • Player console 2Year 1 Year
  • Accessories 90 Days 90 Days
  • Refund or Exchange 30 Days 30 Days

If you have any problems or suggestions with this product, please contact one of the following.

Limited Warranty Statement NORTH AMERICAN ENGLISH
THIS WARRANTY CARD IS VALID ONLY FOR SERVICE ON PRODUCTS PURCHASED IN NORTH AMERICA.

For other countries, please contact the store/dealer where the product was purchased. Thank you for purchasing a Dreamus Company product. All Dreamus Company products come with a one-year limited-time warranty against material or workmanship defects starting from the original date of purchase from an authorized dealer. Dreamus Company warranty covers defects that arise only as a result of the normal use of the product. The product will not be covered under the warranty if:

  1. The product is repaired or altered unless approved or completed by Dreamus Company.
  2. The defect or issue is a result of violating operating or handling instructions provided by Dreamus Company.
  3. The problem is caused by unusual physical or electrical stress, misuse, abuse, power shortage, or negligence.
  4. The problem is caused by a fire or other natural calamity.
  5. The warranty period has expired.

Warranty Period

Dreamus Company product Duration of Limited Warranty North America

  • Player console 1 Year
  • Accessories 90 Days
  • Refund or Exchange 14 Days

for customer or technical support, please see the following website for contact information:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals