SIMPOL HOME SHL-P-116 Pendant Lights Instruction Manual
- October 30, 2023
- Simpol Home
Table of Contents
SIMPOL HOME SHL-P-116 Pendant Lights
Product Information
The product is a chandelier with a code of SHL-P-116. It comes with various parts including a junction box, wire nuts, mounting screws, mounting bracket, studs, ball nuts, leading wires, wires, canopy, nuts, rods, glass shades, sockets, lighting bulb, crystals, cups, screws, plastic anchors, and tapping screws.
Product Usage Instructions
- Begin by unpacking all the parts and checking if everything is included as per the list above.
- Assemble the mounting bracket onto the junction box using the mounting screws included in the package (part C).
- Attach the studs (part E) to the mounting bracket (part D).
- Attach the ball nuts (part F) to the studs (part E).
- Connect the leading wires (part G) to the wires (part H).
- Connect the wires to the canopy (part I) using the wire nuts (part B). Connect the white or identified wire from the lamp to the UL rated connector (part H).
- Attach the mounting bracket to the junction box using the screws provided in the package (part C).
- Install the rods (part K) onto the ball nuts (part F). You can adjust the height of the chandelier by choosing which rod combination to use.
- Attach the glass shades (part L) onto the sockets (part M).
- Insert the lighting bulbs (part N) into the sockets (part M).
- Attach the crystals (part O) onto the cups (part P) using screws (part Q).
- Attach the cups (part P) onto the bottom of the glass shades (part L).
- Finally, use the plastic anchors (part R) and tapping screws (part S) to mount the chandelier onto the ceiling.
If you encounter any problems during the installation process, please contact customer service at [email protected] for assistance.
Dear Customer,
Thanks for your purchase.
If you have any problem about the product, please send an email to
[email protected]. We will try our best to make
you completely satisfied.
Best regards,
Customer Service Team
Assembly Steps
Parts included
Code| Part Description| QTY
A| Junction box| 0
B| Wire nuts| 3
C| Mounting screws| 2
D| Mounting bracket| 1
E| Studs| 2
F| Ball nuts| 2
G| Leading wires| 0
H| Wires| 2
I| Canopy| 1
J| Nuts| 3
K| Rods| 9
L| Glass shades| 3
M| Sockets| 3
N| Lighting bulb| 0
O| Crystals| 3
P| Cups| 3
Q| Screws| 6
R| Plastic anchors| 2
S| Tapping screws| 2