Life Fitness 9500HR Powermill Climber User Manual
- October 30, 2023
- Life Fitness
Table of Contents
Life Fitness 9500HR Powermill Climber
Product Information: Life Fitness Powermill
The Life Fitness Powermill is a fitness equipment designed for high-intensity workouts. It features step assists and rear uprights that provide stability and support during the workout. The product comes with an assembly manual that provides detailed instructions for installation.
Installation Instructions
Before you begin assembling the Life Fitness Powermill, ensure that the most narrow path is over 29.5 inches to allow for proper installation. Follow the instructions below:
Install Step Assists
- Identify the left and right step assists.
- Attach the left step assist using four M8 X 35mm socket head cap screws.
- Attach the right step assist using two M8 X 35mm socket head cap screws.
- Tighten all screws to 18-20 ft. lbs. (24.4-27.1 Nm).
Install Left and Right Rear Uprights
- Identify the left and right rear uprights.
- Attach the left rear upright using four M10 X 20mm hex head cap screws.
- Attach the right rear upright using four M10 X 20mm hex head cap screws.
- Tighten all screws to 28-32 ft. lbs. (38-43.3 Nm).
Refer to the exploded part diagram for assistance during installation. If you have any questions or concerns, please consult the assembly manual or contact customer support for further assistance.
EXPLODED PART DIAGRAM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>