KOREHEALTH KorePulse WIM Massage Ball Instruction Manual
- October 30, 2023
- KOREHEALTH
Table of Contents
KOREHEALTH KorePulse WIM Massage Ball
Charging KorePulse™
-
Connect the charging connector of the power adapter into the charging port of KorePulse™.
-
Plug in the power adapter to the desired outlet.
-
The LED indicators will blink red while KorePulse™ is charging.
• If KorePulse™ has been charged for three hours but not all the three battery LED indicators are on, unplug the power adapter to avoid danger and contact the customer service team.
• Do not use KorePulse™ while it is being charged.
- When the three battery LED indicators have stopped blinking and shine continuously, KorePulse™ is fully charged.
• KorePulse™ typically takes 1.5 hours to full charge (when fully depleted).
- When KorePulse™ has been fully charged, unplug the power adapter and remove the charging connector from KorePulse™.
KorePulse™ has three different vibration speeds: Low, Medium, and High. It also features “Recovery Massage Mode,” which creates soothing pulses of vibration. Press the button to cycle between the different modes.
How to Use
- To turn on KorePulse™, press the button once. The first LED indicator light will turn on and the device will begin vibrating on Low.
- To increase the speed, press the button a second time. The second LED indicator light will turn on and the device will begin vibrating on Medium.
- To activate Recovery Massage Mode, press the button a third time. The third LED indicator light will turn on and the device will begin vibrating at variable levels.
- To increase the speed to the maximum level, press the button a fourth time. The fourth LED indicator light will turn on and the device will begin vibrating on High.
Turning Off KorePulse™
- Press the button a fifth time to turn off Kore Pulse™ The device will stop vibrating and all the LED indicator lights will turn off.
- To turn off KorePulse™ without cycling through all four vibration modes, press and hold the button for two seconds.
It’s not recommended to use the device for prolonged periods of time. For safety, KorePulse™ will automatically shut off after 10 minutes.
Maintenance Instructions
- Before cleaning KorePulse™, make sure it is turned off and unplugged.
- Wipe KorePulse™ with a clean, soft cotton cloth.
- To avoid damage to KorePulse™, wipe the button area with a dry cloth.
- To avoid electric shock, keep KorePulse™ and its components away from liquids.
Proper Storage
- Keep KorePulse™ in a clean, dry place. We recommend putting it in its original packaging.
- Avoid exposure to direct sunlight or high temperatures.
Common Problems and Solutions
Problem | Possible Cause and Solution |
---|---|
KorePulse™ does not vibrate when turned on. | **Possible Cause** |
The battery has been depleted.
**Solution**
Plug in KorePulse™ and charge it fully.
KorePulse™ vibration is too weak.| Possible Cause
Low battery.
**Solution**
Please charge KorePulse™
KorePulse™ stops vibrating just after a few minutes (even when fully-
charged).| Possible Cause
The surroundings are either too hot or too cold.
**Solution**
Only use KorePulse”M when the surrounding temperature is between 1O °C and 40°C.
KorePulse™ suddenly stops working.| Possible Cause
KorePul e™ is designed to automatically stop after ten minutes.
**Solution**
To continue using, restart the device.
KorePulse™ makes noise while working.| **** This is normal for the device .
Specifications
Input | AC 100-240V, 50/60Hz, 0.5A MAX; DC 8.4V, 1OOOmAh |
---|---|
Battery spec. | DC 7.4V, 1200mAh |
Charging time | About 1.5hrs (full charge) |
Battery discharge time | 50 mins |
Working temperature | 10°C-40°C |
Maximum weight load | 80kg |
Product size | 095 x L90mm |
Product weight | 0.32kg |
Material | Silicone and ABS |
Product accessories | Power adapter, manual |
Manufacturing origin | China |
- The actual amount of time per battery charge depends on the number of uses, as well as the use environment.
The device complies with the European Directives 2014/30/EU.
At the end of its service life, this product may not be disposed of in the
normal household waste, but rather must be disposed of at a collection point
for recycling electrical and electronic devices. The materials are recyclable
according to their labelling. You make an important contribution to protecting
our environment by reusing, recycling, or utilizing old devices in other ways.
Please ask the municipal administration where the appropriate disposal
facility is located.
Subject to change.
Precautions for use:
- The device should only be used in a home or private environment.
- For adult use only. Children should not play with the device.
- This device may be used by persons with physical, sensory, or mental disabilities provided they are supervised.
- Not suitable for pregnant women.
- Do not let the charging port come in contact with moisture or submerge the device in water.
- Do not modify or disassemble the device.
- Do not use when the device is wet or damaged.
- Consult a doctor before using this product if you:
• Have a pacemaker;
• Have any health problems;
• Or are unsure whether this device is suitable for you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>