Polder KTH-715 Advantage Pro Dish Rack with Side Out Drying Tray Instruction Manual
- October 30, 2023
- Polder
Table of Contents
ADVANTAGE PRO DISH RACK with slideout drying tray KTH-715
ASSEMBLY INSTRUCTIONS
IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY.
For assistance with use, parts and customer service call (800) 431.2133 Monday through Friday, 9AM to 5PM EST, email info@polder.com or visit our website at www.polder.com. Customers in the UK can call +44 (0) 1243 780501 or visit www.polderproducts.co.uk
STEP 1: Insert Drain tray into Stainless Steel frame
Position drain tray so narrowest section is inserted first into frame. The
drain tray slides into the frame through the center opening at the side
opposite the cup holders. 
STEP 2: Register drain tray feet on frame
There are two sets of feet on the underside of the drain tray. Be sure these
are properly registered on frame. The rear set of feet should straddle the
wire while the front set should sit flush up against the wire.
STEP 3: Mount Utensil bin & insert drying tray
Be sure to place the Utensil bin on the frame after the drain tray is in place. This will ensure easier assembly
Draying tray slides under drain tray to store within dish rack
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>