HAUTE DECOR DCSW2801 Classic Pre-Lit Window Swag Instructions

June 12, 2024
HAUTE DECOR

HAUTE DECOR DCSW2801 Classic Pre-Lit Window Swag

HAUTE-DECOR-DCSW2801-Classic-Pre-Lit-Window-Swag-PRODUCT-IMG

Product Information

  • Product Name: Classic Pre-Lit Window Swag 28 Inch
  • Item Number: DCSW2801
  • Made in: China

Product Usage Instructions

  1. Open the window.
  2. Place the swag loop on the windowsill.
  3. Close the window on the loop to secure it.
  4. The swag is suitable for indoor or outdoor use.

Product Battery Warning

  1. Adult supervision is necessary when changing and disposing of batteries.
  2. Slide the switch to the OFF position when changing batteries.
  3. Confirm proper polarity when inserting batteries.
  4. Do not attempt to charge non-rechargeable batteries. Only recharge rechargeable batteries and do it under adult supervision.
  5. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

For any comments or questions, please contact us:

Instructions

  1. Place the window swag on a flat surface. Straighten and separate all branch tips. To achieve maximum fullness, tips should not touch one another. To shape the bow, slip fingers into the loop mold the loop into a rounded shape, and straighten tails so they are hanging down.
  2. From the back of the window swag, find the battery box and open it, insert 3 AA batteries into the battery box, then close the battery box (see Figures A, B, C, D & E).
  3. Each battery box is featured with a 3-position switch: On – Off – Timer (see Figure F) . The timer enables the LED lights to remain on for 6 hours, then off for the next 18 hours. This will repeat daily.
  4. Open window; place swag loop on the windowsill then the close window on loop to secure. Suitable for indoor or outdoor use.

Battery Warning

  1. Adult supervision is necessary when changing and disposing of batteries.
  2. Slide switch to the “OFF” position when changing batteries.
  3. Confirm proper polarity when inserting batteries.
  4. Do not attempt to charge non-rechargeable batteries. Only recharge rechargeable batteries and do it under adult supervision.
  5. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
  6. Replace batteries when the light is faint.
  7. Replace all batteries at the same time.
  8. Remove exhausted/dead batteries from the unit.
  9. Do not short-circuit terminals under any circumstances.
  10. Do not allow the bottom of the unit to come in contact with heat.
  11. Never throw batteries in a fire or attempt to open batteries. Batteries may explode or leak.
  12. Remove all batteries from the unit before storage.
  13. Batteries are harmful if swallowed. Keep away from young children.

THANK YOU FOR YOUR PURCHASE

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals