ubabub M23688 Arc Glider Recliner with Electronic Control and USB Instructions
- October 30, 2023
- ubabub
Table of Contents
Arc Glider Recliner with
Electronic Control and USB
Product Code: M23688
INSTRUCTIONS
revised 28OCT22
PERSONS REQUIRED ASSEMBLY TIME
Congratulations and thank you for purchasing an Hubbub product.
As for our entire line of clearly modern nursery furniture, during the design
and production of this product we have selected materials that are either
recyclable or derived from sustainable practices.
Contents
MAINTENANCE AND CLEANING
To preserve the hand-crafted quality of your furniture, we recommend using a
cotton cloth and a non-toxic cleaner. Periodic polishing or oiling on wood
stains will help to maintain the rich wood tones. For our upholstered
products, we recommend using water to clean suede products and light foam
cleaners for all other fabrics.
If your child is teething, some furniture’s finish may be affected. Be assured
that our low-VOC lacquers, finishes and glues comply with applicable
regulations and standards. Touch up kits and replacement parts are available
for purchase upon request by contacting Hubbub.
IMPORTANT NOTE:
Improper assembly can result in damage to your furniture or cause harm to your
child. Proper assembly is critical to ensure a safe and comfortable end
result. Please read all instructions before assembly and keep instructions for
future use.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be
followed, including the following:
Read all instructions before using (this furnishing) .
DANGER – To reduce the risk of electric shock:
Always unplug this furnishing from the electrical outlet before cleaning or
servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to
persons:
- Unplug from outlet before putting on or taking off parts.
- Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
- Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the off position, then remove plug from outlet.
- Risk of Injury – Keep children away from extended foot support (or other similar parts).
- Household use only.
- The appliance is only to be used with the power supply unit provided with the appliance.
WARNING Risk of Electric Shock, Fire, and Injury.
Review the assembly instructions to confirm that the appropriate critical
components and accessories are being used with the furnishing.
Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
-
Read all instructions before assembling this product.
-
Keep instructions for future use.
-
Do not throw away packaging material until assembly is complete.
-
Properly discard all packaging materials after assembly is complete.
-
This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers and body parts away from the mechanism.
To reduce the risk of head entrapment and other injuries, keep children and pets away from openings and moving parts in and around furniture. -
Proper assembly of this item requires 2 people.
-
Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. DO NOT use this product if any parts are missing, damaged or broken. Contact Ubabub for replacement parts and instructional literature if needed. DO NOT substitute parts.
-
Maximum weight capacity: 300 pounds.
SAVE THESE INSTRUCTIONS
ONE YEAR LIMITED WARRANTY
We will replace any missing parts at the time of purchase or any defective
item within a one year period from the date of original purchase. An extended
warranty period of three years is valid only on the electronic controls and
electronic mechanisms of this product. Please keep your receipt so that we may
process your warranty request. This warranty only covers new units with
original packaging and ownership, and is not transferable. It does not cover
any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that result from
installation and assembly, normal wear and tear, abuse, negligence, improper
use or alteration to the finish, design, and hardware of the product. The
specific legal rights of this warranty may vary from state to state. Some
states do not allow any exclusion or limitation of incidental damages. Some
states do not allow limitation on how long an implied warranty lasts.
Registering your product is even easier than before. You can register your
product on our website at:
www.themdbfamily.com/registrations
for USA purchases.
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS. PLEASE VISIT US
AT:
UBABUB INTERNATIONAL
PO BOX 4129
RINGWOOD VIC 3134
AUSTRALIA
WWW.DESIGNKIDS.COM.AU| USA
WWW.THEMDBFAMILY.COM/SUPPORT
---|---
OR YOU CAN CONTACT US BY MAIL:
UBABUB INTERNATIONAL
PO BOX 4129
RINGWOOD VIC 3134| MILLION DOLLAR BABY CO.
8700 REX RD.
PICO RIVERA, CA 90660
Assembly Instructions
Step 1
Step 1 (in details)
Tips on the Locking Mechanism
Make sure the locking mechanism on each metal glide is aligned in the center.
Firmly push each side into place one at a time. You should hear a click when the chair back locks into place on each side.
WARNING
MAKE SURE POWER CABLE IS NOT UNDER THE WOODEN BASE. THIS IS A FIRE HAZARD.
Step 3
Step 4
Finished assembly
-
If chair is not functioning after following these steps, please check the cord underneath the chair is fully plugged in to the chair motor.
CAUTION :
Risk of electric shock.
Dry location use only.
This Class B digital apparatus complies with Canadian ICES-003.
This Device Complies with part 15 of the FCC rules.
WARNING :
Operation is subject to the following conditions:- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
POWER CORD SAFETY
WARNING:
UNPLUG AND REMOVE POWER CORD FROM THE WALL AND THE POWER SOCKET AT THE REAR OF
THE POWERED RECLINER WHEN NOT IN USE AND STORE THE CORD OUT OF REACH OF
CHILDREN.
DANGER:
To reduce the risk of electric shock:
Always unplug the powered recliner from the electrical outlet before cleaning.
ARC GLIDER RECLINER WITH ELECTRONIC CONTROL AND USB
Control Panel
- Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
ARC GLIDER RECLINER WITH ELECTRONIC CONTROL AND USB
Tension Adjustment From Chair to Recliner
The chair can be made to recline by simply pressing the button located at the
inside right of the armrest.
Tension Adjustment From Recliner to Chair
The chair is returned to the upright position by pressing the button located
at the inside right of the armrest.
CAUTION :
Do not allow children to play on this mechanized furniture or operate the
mechanism. Leg rest folds down on closing so that a child could possibly be
injured. Always leave in an upright and closed position. Keep hands and feet
clear of mechanism. Only the occupant should operate it.
ARC GLIDER RECLINER WITH ELECTRONIC CONTROL AND USB
To Disassemble :
Made in China
References
- Design Your Dream Nursery | Shop Modern Baby Nursery Furniture Online
- Product Registration | The MDB Family
- CUSTOMER SUPPORT | Million Dollar Baby Co.