AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case User Manual

June 4, 2024
AeroCool

ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case
User ManualAeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower
Case

Front I/O Panel Cable Connection

Front Panel Connector (Please refer to the motherboard’s manual for further instructions).
Note: Specifications may vary depending on your region. Contact your local retailer for more information.
AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case -
cable

Accessory Bag Contents

AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case -
screw

How to install Guide

AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case -
deviceAeroCool ACCM-PB19033.1
AirHawk Duo ARGB Mid Tower Case - device 1AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case -
device 3AeroCool ACCM-
PB19033.1 AirHawk Duo ARGB Mid Tower Case - device 2AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case -
device 6AeroCool ACCM-
PB19033.1 AirHawk Duo ARGB Mid Tower Case - device 5AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case -
device 4

I/O Panel

AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case - device
8 Reset : Also used as an LED button if connected to the hub Hold for 3 secs to switch between motherboard and button control Hold Reset for 6 secs to turn off LED and press once to turn it back on
Note: Specifications may vary depending on your region. Contact your local retailer for more information.

RGB Fan Hub (H66C)

AeroCool ACCM-PB19033.1 AirHawk Duo ARGB Mid Tower Case - device
9 Connection Set Up User Guide

For ASUS Aura Sync, MSI Mystic Light Sync, and GIGABYTE RGB Fusion Motherboards

  1. Connect (A) to the motherboard’s PWM socket
  2. Connect (B) to motherboard Addressable RGB socket
  3. Connect (C) to PSU’s SATA connector

For GIGABYTE RGB Fusion Motherboards

  1. Connect (A) to the motherboard’s PWM socket
  2. Connect (D) to the motherboard’s Addressable RGB socket
  3. Connect (C) to PSU’s SATA connector

For Non-Addressable RGB Motherboards

  1. Connect (A) to the motherboard’s PWM socket
  2. Connect the 2-Pin reset switch connector (E) with your hub.
  3. Connect (C) to PSU’s SATA connector
  4. Use the RGB fan connectors (F) to connect the Addressable RGB fans with your hub.

IlpoKoHcynb-ropoancs vi Kynm-b gaHHoe
o6opygoBaHme Bbl mo>KeTe B KomnaHow «AHR-Cmci-emcD agpec:
125480, r.MocKaa, yn.TypourcKas, p.33/1;
site: https://andpro.ru
-ren: +7 495-545-4870
email: info@andpro.ru
lipm o6paigeHmo mcnonb30-re npomoKog
AND-PDF 11 nonyym-e cKingKy.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals