Urbn 272018 Power Bank Instruction Manual
- October 30, 2023
- urbn
Table of Contents
POWER YOUR VIBE POWER 5000mah
MAGTAG POWER BANK
Instruction Manual
Please read all instructions carefully.
Retain for future use.
Product Overview
Thank you for choosing this product.
The MagTag Power bank offers 15W wireless charging capabilities with support
for MagSafe charging, as well as 12W wired charging. It features a Lithium
polymer battery and chip to ensure a secure, efficient, and compatible
charging experience for users.
- Wireless Charging Indicator(Green)
- Battery Level Indicator
- USB-C Port for Charging and Discharging.
- Power Button
Note: To start charging, press the power button and make sure that the MagTag
power bank is properly connected before continuing.
Safety: The power bank has multiple safeguard technologies to provide over-
charge, over-discharge, high temperature, and short circuit protection in all
working conditions.
Efficiency: The power bank can provide 15 watts of fast wireless charging and
12 watts of wired charging. Additionally, it can facilitate dual charging with
a shared charging speed of up to 15W when connected to both wired and wireless
devices.
Specifications
Capacity: 5000 mAh
Type-C Input: 5V/2A (Max)
Type-C Output: 5V/2A (Max)
Wireless Output: 5V, 7V, 10V, 15V
Dual Charging: 5V/2.4A (Per Port), 5V/3.1A (Max)
Charging Time: 3.5 Hours (18W), 5.5 Hours (10W)
Size: l x w x h cm
Weight: w g
Battery Type:
Wireless Charging
To initiate charging, press the power button and ensure that the MagTag power
bank is securely attached before proceeding.
For devices and covers that do not support MagSafe charging, please use the
MagTag ring provided in the package.
Note: MagTag charging is only compatible with devices that support wireless
charging.
| Blinking | LED 1 | LED 2 | LED 3 | LED 4 |
|---|---|---|---|---|
| Power | 0-25% | 25-50% | 50-75% | 75-100% |
NOTE: The Magnetic function only works with MagSafe charging phones
(iPhone 12 series or later) or phones with a MagSafe case.
• Press the power button to activate wireless charging.
Charge your Device via a cable
Charge your Device wirelessly
Charging
To charge the Magtag power bank, connect it to an adapeter that supports a
speed of over 10W using a Type-C cable.
Note: Type-C cable included in the box.
Pass Through Charging
The MagTag power bank is equipped with a pass-through charging feature that
enables simultaneous charging of the power bank and the phone. To utilize this
feature, charge your power bank while it is connected to your phone by
following the instructions on the ‘Charging’ page. Please ensure that the
power bank is turned on by pressing the power button.
MagTagTM Ring Application
Transform your wireless charging devices into MagTagTM charging enabled
devices by adding the MagTagTM ring included in the box. Refer to the
instructions below for proper placement of the MagTagTM ring.
Note: The device must have wireless charging capability. If charging through a
case, ensure that the case is thin enough and attempt charging prior to
attaching the MagTagTM ring.
Important Notes
This wireless charger is not compatible with non-MagSafe phone cases, such as
Otterbox Defender cases.
- Do not use an adapter with an output less then 5V/2A (10W).
- Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power, which is something that happens to allwireless chargers. It is recommended that you chargeyour device in environments with temperatures below 25°C / 77°F
- Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Safety Instructions
When using this product, basic precautions should always be followed, including the following:
- Store the product in a cool, dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 40°C / 32°F to 104°F.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required.
- Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should charge and discharge it once every three months. When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.
POWER YOUR VIBE
To know more about Urbn visit our website
www.urbnworld.com
To connect with us for assistance please contact us on
support@urbnworld.com or 1800 22 2468
urbnworld urbnworld
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>