Tahanbath W123243782-KXC 2 Inch 1 Handle 2 Spray Faucet Rain Shower Head System Instruction Manual

W123243782-KXC 2 Inch 1 Handle 2 Spray Faucet Rain Shower Head System

Product Information

The product is a shower system that includes a shower valve, shower bracket, hand-held shower, hose, and rain shower head. It can be installed on both concrete and wood walls or ceilings. The product does not include a copper drop ear pipe elbow, which is recommended for installation.

Components

• Shower valve
• Shower bracket
• Hand-held shower
• Hose
• Rain shower head

Essential Accessories List

1. U PC
2. C
3. R
4. Installation Manual
5. Warning – Choking Hazard
6. Teflon tape
7. Shower arm
8. Plate
9. Knob
10. Handle
11. Ceiling shower arm
12. Rain shower head (for wall installation)
13. Rain shower head (for ceiling installation)
14. Screws and bolts for installation
15. Warranty card

WARNING : Choking hazard. Keep all small parts and plastic bags out of the reach of children

Product Usage Instructions

Before you start, prepare the wall for installation

(The depth shown here is for reference only;please determine actual depth according to thickness of bathroom tiles.）

Wipe off any dirt and/or impurities from the insides of all pipes and fittings

Wrap enough teflon tape

Installation Preparation

Before installation, prepare the wall by determining the actual depth according to the thickness of bathroom tiles. For concrete walls, follow the instructions for wall-mounted or ceiling-mounted installation. For wood walls, follow the instructions for wall-mounted installation.

Installation Instructions

Wall-Mounted Installation

1. Determine the position of the valve.

2. Wipe off any dirt and/or impurities from the insides of all pipes and fittings

3. Wrap enough Teflon tape around the pipes and fittings.Check for leakage and/or blockage onboth hot and cold water supplies.
   (Shower valve must be connected to both hot AND cold water pipes. As a safety feature, the valve will only work if both pipes are connected properly.)

4. A:Wall Mounted installation

5. B:Ceiling Mounted installation

6. Tiles
   (If the tiles are too thick, there will not be enough space to install plate 8 knob 9 and handl 10

7. A:Wall Mounted lnstallation

8. B:Ceiling Mounted installation

9. Install the plate, knob, and handle on the wall.

10. Install the shower bracket.

11. Install the hand-held shower and hose.

12. Install hand-held shower and hose

13. Install the shower arm and rain shower head.

Customer Name|
---|---
Retailer/Assembly Fitter|
Purchase Date|
Warranty Duration| 5 years as of purchase date

1. If the above contents are not complete, the warranty will be considered void, please confirm the above contents when you purchase
2. The complimentary repairs are limited to instances mentioned on the warranty card only.
3. Within warranty period, if any technical faults occur, customer should present this

Ceiling-Mounted Installation

1. Determine the position of the valve.
2. Wrap enough Teflon tape around the pipes and fittings.
3. Check for leakage and/or blockage on both hot and cold water supplies.
4. Cut away the part of the embedded box sticking out so that it is level with the ceiling.
5. Install the shower bracket.
6. Install the hand-held shower and hose.
7. Install the ceiling shower arm and rain shower head.

Cleaning and Maintenance

To clean the shower head nozzles, rub them with your finger or a toothbrush to loosen any deposits, and then run hot water for a few minutes.

Warranty

The product comes with a 5-year warranty as of the purchase date. If any technical faults occur within the warranty period, present the warranty card along with the invoice to the retailer/assembly fitter for complimentary repairs. Please confirm that all essential accessories are included at the time of purchase to avoid voiding the warranty.

warranty card along with the invoice to the retailer/ assembly fitter.

Guarantee Repairs Claims

1. Within warranty period, SR SUNRISE SANITARY is responsible for repairing any defective product free of charge.
2. Please contact seller via email with this warranty card and invoice if repairs are needed during the warranty period.
3. SR SUNRISE SANITARY will not be responsible for any claims listed below:
4. The damage and/or malfunction caused by improper use an/or repairs; or any unauthorized reconstruction; including any damage caused by abuse(i.e fall, throw…etc.)
5. Please engage the services of a professional plumber. SR SUNRISE SANITARY will not be responsible for any damage and/malfunction caused by wrongful installation.
6. The damage and/malfunction caused by removing after installation or other factors.
7. The damage and/malfunction caused by application beyond the scope of usage.
8. The damage and/malfunction caused by sand, dirt and other impurities.
9. The damage and/malfunction caused by improper/insufficient maintenance: rust on finishing etc.
10. The damage and/malfunction caused by fir, earthquakes, flood, lightning and other natural disasters, pollution, harmful gas, salts, abnormal voltage and other factors.
11. On occasions when the warrantee card or invoice is not presented.
12. The recommended water temperature of hand shower and rain shower is ≤42℃; water pressure0.1-0.3 Mpa. The highest temperature should not reach beyond 70°C and water pressure should not exceed the limits of 0.05-0.5 Mpa. Please keep any shower products away from the heating devices to avoid potential risks.
13. This limited warranty applies only to the original end-user or business. It expressly excludes labor charges, removal charges, installation, or other incidental or consequential costs. Any inappropriate application will void the warranty.
14. This warranty cannot be replaced if missed, please keep safe.

Clean and maintain product

How to clean shower head nozzles

1. Just rub the nozzles with your finger or a toothbrush to loosen any deposits, and then run hot water for a few minutes
2. Put the showerhead into a pot .Consider using a smaller container that just about fits the showerhead; this way, you will use less vinegar. You can also use a small bucket or plastic bin.

Fill the pot with enough white vinegar to cover the showerhead.
The acids in the vinegar will help dissolve the white mineral deposits on the showerhead.
Let the showerhead soak in the vinegar for 30 minutes. The more soiled the showerhead is, the longer you will have to leave it in the vinegar.

Maintain Chrome and Brushed nickel finished product

1. To clean the products all you need is a high quality microfiber cloth.
2. Apply a high quality chrome cleaner to a clean cotton cloth . and wipe over the chrome.Leave as per product instructions, and then rinse with warm water. Gently remove any product residue using a dry chamois or paper towel
3. How to Clean Chrome: Homemade Solutions In addition to professional products, homespun solutions also have their place when breathing new life into dull chrome. Try this shortcut to achieving chrome cleaning nirvana:

Detergent and warm water! Submerge chrome-plated objects including pots and pans in a sink full of warm water. Add a half-cup of a high quality washing up detergent(Persil washing up liquid is good)and rub gently with a soft cotton cloth to avoid scratching the chrome. Use a scented detergent to leave kitchenware smelling fresh, as well as spotless.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>