Electrolux LRT6ME38W1 MultiFlow Refrigerator User Manual
- October 30, 2023
- Electrolux
Table of Contents
Electrolux LRT6ME38W1 MultiFlow Refrigerator User Manual
FIRE Warning; Risk of fire / flammable materials
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux. Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support Register your product for better service:
www.registerelectrolux.com Buy Accessories, Consumables and Original spare
parts for your appliance: www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service
Centre, ensure that you have the following data available: Model, PNC, Serial
Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips
Environmental information Subject to change without notice.
PART – 1. BEFORE USING THE APPLIANCE
General warnings
Please read the instruction manual carefully before installing and using your
appliance. We are not responsible for the damage occurred due to misuse.
Follow all instructions on your appliance and instruction manual, and keep
this manual in a safe place to resolve the problems that may occur in the
future. This appliance is not intended to be used as a built-in appliance. In
case of different installation from freestanding respecting space required in
use dimensions, the appliance will function correctly but energy consumption
migh increase slightly.
WARNING: Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside the food storage compartments
of the appliance, unless they are of the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: When positioning the appliance, ensure the supply cord is not trapped
or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance.
WARNING: In order to avoid any hazards resulting from the instability of the
appliance, it must be fixed in accordance with the following instructions:
If your appliance uses R600a as a refrigerant (this information will be
provided on the label of the cooler) you should take care during
transportation and installation to prevent the cooler
EN -4-
elements from being damaged. R600a is an environmentally friendly and natural
gas, but it is explosive. In the event of a leak due to damage of the cooler
elements, move your fridge away from open flames or heat sources and ventilate
the room where the appliance is located for a few minutes.
· Keep all packaging away from children and dispose of it appropriately.
· While carrying and positioning the fridge, do not damage the cooler gas
circuit.
· Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
General Safety
· This appliance is for storing food and beverages only.
· This appliance is designed for single household domestic use in an indoor
environment.
· This appliance may be used in offices, hotel guest rooms, bed & breakfast
guest rooms, farm guest houses and other similar accommodation where such use
does not exceed (average) domestic usage levels.
· If the socket does not match the refrigerator plug, it must be replaced by
the manufacturer, a service agent or similarly qualified persons in order to
avoid a hazard.
· A specially grounded plug has been connected to the power cable of your
refrigerator. This plug should be used with a specially grounded socket of 16
amperes or 10 amperes according to country where the product will be sold. If
there is no such socket in your house, please have it installed by an
authorized electrician.
· This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning
EN -5-
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
· Children aged from 3 to 8 years are allowed to load and unload refrigerating
appliances. Children are not expected to perform cleaning or user maintenance
of the appliance, very young children (0-3 years old) are not expected to use
appliances, young children (3-8 years old) are not expected to use appliances
safely unless continuous supervision is given, older children (8-14 years old)
and vulnerable people can use appliances safely after they have been given
appropriate supervision or instruction concerning use of the appliance. Very
vulnerable people are not expected to use appliances safely unless continuous
supervision is given.
· If the supply cord is damaged, it must be replaced by the manufacturer, an
authorised service agent or similar qualified persons, in order to avoid a
hazard.
· This appliance is not intended for use at altitudes exceeding 2000 m.
To avoid contamination of food, please respect the following instructions:
· Opening the door for long periods can cause a significant increase of the
temperature in the compartments of the appliance.
· Clean regularly surfaces that can come in contact with food and accessible
drainage systems
· Store raw meat and fish in suitable containers in the refrigerator, so that
it is not in contact with or drip onto other food.
· Two-star frozen-food compartments are suitable for storing pre-frozen food,
storing or making ice cream and making ice cubes.
EN -6-
· One-, two- and three-star compartments are not suitable for the freezing of
fresh food.
· If the refrigerating appliance is left empty for long periods, switch off,
defrost, clean, dry, and leave the door open to prevent mould developing
within the appliance.
Service · To repair the appliance contact the Authorised Service Centre. Use
original spare parts only. · Please note that self-repair or nonprofessional
repair can have safety consequences and might void the guarantee. · The
following spare parts will be available for 7 years after the model has been
discontinued: thermostats, temperature sensors, printed circuit boards, light
sources, door handles, door hinges, trays and baskets. · Please note that some
of these spare parts are only available to professional repairers, and that
not all spare parts are relevant for all models. · Door gaskets will be
available for 10 years after the model has been discontinued.
EN -7-
Old and out-of-order fridges or freezer
· If your old fridge or freezer has a lock, break or remove the lock before
discarding it, because children may get trapped inside it and may cause an
accident.
· Old fridges and freezers contain isolation material and refrigerant with
CFC. Therefore, take care not to harm environment when you are discarding your
old fridges.
Disposal of your old appliance The symbol on the product or on its packaging
indicates that this product may not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you
purchased the product.
Notes: · This appliance is produced to be used in homes and it can only be
used in domestic environments and for the specified purposes. It is not
suitable for commercial or common use. Such use will cause the guarantee of
the appliance to be cancelled and our company will not be responsible for the
losses to be occurred. · This appliance is produced to be used in houses and
it is only suitable for cooling / storing foods. It is not suitable for
commercial or common use and/or for storing substances except for food. Our
company is not responsible for the losses to be occurred in the contrary case.
Safety warnings
· Do not connect your fridge to the mains electricity supply using an
extension lead. · Do not use damaged, torn or old plugs. · Do not pull, bend
or damage the cord.
· Do not use plug adapter. · This appliance is designed for use by adults. Do
not allow children to play
with the appliance or hang off the door. · Never touch the power cord/plug
with wet hands. This may cause a
short circuit or electric shock. · Do not place explosive or flammable
material in your fridge. Place drinks
with high alcohol content vertically in the fridge compartment and make sure
their tops are tightly closed.
EN -8-
When the door of the fridge is closed, a vacuum seal will form. Wait for 1
minute before reopening it. This application is optional for easy opening of
the door. With this application, a little condensation may occur around this
area and you may remove it.
Installing and operating your fridge
Before using your fridge for the first time, please pay attention to the
following points: · The operating voltage for your fridge is 220-240 V at
50Hz.
· The plug must be accessible after installation.
· Your fridge may have an odour when it is operated for the first time. This
is normal and the odour will fade when your fridge starts to cool.
· Before connecting your fridge, ensure that the information on the data plate
(voltage and connected load) matches that of the mains electricity supply. If
in doubt, consult a qualified electrician.
· Insert the plug into a socket with an efficient ground connection. If the
socket has no ground contact or the plug does not match, we recommend you
consult a qualified electrician for assistance.
· The appliance must be connected with a properly installed fused socket. The
power supply (AC) and voltage at the operating point must match with the
details on the name plate of the appliance (the name plate is located on the
inside left of the appliance).
· We do not accept responsibility for any damages that occur due to ungrounded
usage.
· Place your fridge where it will not be exposed to direct sunlight.
· Your fridge must never be used outdoors or exposed to rain.
· Your appliance must be at least 50 cm away from stoves, gas ovens and heater
cores, and at least 5 cm away from electrical ovens.
· Do not cover the body or top of fridge with lace. This will affect the
performance of your fridge.
· Top clearance required for the appliance can be derived from dimensions
provided in chapter Dimensions.
· Do not place heavy items on the appliance.
· Use the adjustable front legs to make sure your appliance is level and
stable. You can adjust the legs by turning them in either direction. This must
be done before placing food in the appliance.
· Clean the appliance thoroughly before use (see Cleaning and Maintenance).
· Before using your fridge, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return
all parts to the fridge after cleaning.
· Install the two plastic distance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the figure) to prevent
the condenser from touching the wall.
· If you position the appliance against a wall in a freestanding installation,
install the rear spacers in order to guarantee the maximum possible distance
EN -9-
· For Side by Side niche installation please refer to the Joining Kit provided
with the cabinet freezer and its installation manual (NOTE: joining kit is
also available separately as accessory)
Before Using your Fridge
· When using your fridge for the first time, or after transportation, keep it
in an upright position for at least 3 hours before plugging into the mains.
This allows efficient operation and prevents damage to the compressor.
· Your fridge may have a smell when it is operated for the first time. This is
normal and the smell will fade away when your fridge starts to cool.
Internal lighting WARNING! Risk of electric shock.
· Concerning the lamp(s) inside this product and spare part lamps sold
separately: These lamps are intended to withstand extreme physical conditions
in household appliances, such as temperature, vibration, humidity, or are
intended to signal information about the operational status of the appliance.
They are not intended to be used in other applications and are not suitable
for household room illumination.
EN -10-
H1 H2
D2 D3
D1
Dimensions
W2
W1
90o
W3
Overall dimensions 1
H1*
mm
1860
W1
mm
595
D1
mm
650
1 the height, width and depth of the appliance without the handle
- including the height of the top hinge (10 mm)
Space required in use 2
H2
mm
1900
W2
mm
600
D2
mm
718
2 the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
Overall space required in use
3
W3
mm
D3
mm
917 1158
3 the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment
EN -11-
PART – 2. THE VARIOUS FUNCTION AND POSSIBILITIES
Information on No-Frost technology
No-frost refrigerators differ from other static refrigerators in their
operating principle. In normal refrigerators the humidity entering the
refrigerators due to opening the door and the humidity inherent in the food
causes freezing in the backside of air duct. To defrost the frost and ice in
the backside of air duct, you are periodically required to turn off the
refrigerator, place the food that needs to be kept cooled in a separately
cooled. The situation is completely different in no-frost refrigerators. Dry
and cold air is blown into the refrigerator compartment homogeneously and
evenly from several points via a blower fan. Cold air dispersed homogeneously
and evenly between the shelves cools all of your food equally and uniformly,
thus preventing humidity and freezing. Therefore your no-frost refrigerators
allows you ease of use, in addition to its huge capacity and stylish
appearance.
Display and Control Panel
Using the Control Panel 1. Fridge temperature set button 2. Super cooling
symbol (Super cooling LED) 3. Alarm symbol (Alarm LED) 4. Fridge adjusted
temperature indicator
Operating your Fridge
Lighting (If available) When the product is plugged in for the first time, the
interior lights may turn on 1 minute late due to opening tests. Fridge
Temperature Set Button This button allows setting temperature of the fridge.
In order to set values for fridge partition, press this button. Use this
button also to activate super cooling mode.
EN -12-
Alarm symbol (Alarm LED)
In case of a problem within the fridge, the alarm led will release red light.
Super Cooling Mode
When would it be used? · To cooling huge quantities of food. · To cooling fast food. · To cooling food quickly. · To store seasonal food for a long time.
How to use? · Press temperature set button until super cooling light comes on.
· Super cooling led will light during this mode.
· For optimal appliance performance in maximum cooling capacity, set the
appliance to active super cooling mode 6 hours before you put the fresh food
into the fridge.
During this mode:
If you press temperature set button, the mode will be cancelled and the
setting will be restored from 2.
The super cooling mode will be cancel automatically after 6 hours or when
cooling sensor temperature falls below 2 °C. Fridge Temperature Settings
· The initial temperature of the setting display is 5 °C. · Press fridge
setting button once. · Every time you press the button, the setting
temperature will increase. (2 °C, 4 °C, 5 °C,
6 °C, 8 °C, Super cooling) · If you press fridge setting button until super
cooling symbol is displayed on your fridge. · Settings display and you do not
press any button within the following 3 seconds. · Super cooling will blink. ·
If you keep on pressing, it will restart from last value. Recommended
Temperature Values for Cooler
When to adjust
For cooling the fridge at minimum capacity
In normal usage
For cooling the fridge at maximum capacity
Temperature Settings Warnings
Inner Temperature (oC)
8
4
2
· It is not recommended that you operate your fridge in environments colder
than 10°C in terms of its efficiency.
· Do not start another adjustment before completing one adjustment.
· Temperature adjustments should be made according to the frequency of door
openings and the quantity of food kept inside the fridge. EN -13-
· When you first switch on the appliance, allow it to operate for 24 hours in
order to reach normal operating temperature. During this time, do not open the
door or place a lot of food inside the appliance.
· If the appliance is switched off or unplugged, wait at least 5 minutes
before plugging the appliance in or restarting it in order to prevent damage
to the compressor.
· Your fridge is designed to operate within specific ambient temperature
ranges, according to the climate class stated on the information label. We do
not recommend operating your fridge outside the stated temperatures value
limits.
· Your appliance is designed to operate in the ambient temperature (T/SN =
10°C 43°C) intervals stated in the standards, according to the climate class
displayed on the information label. We do not recommend operating your
appliance out of the stated temperature limits in terms of cooling
effectiveness.
Climate class T ST N SN
Meaning Tropical Subtropical Temperate Extended temperate
Ambient Temperature
This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 43 °C.
This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 38 °C.
This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 32 °C.
This refrigerating appliance is intended to be used at ambient temperatures
ranging from 10 °C to 32 °C.
The Turbo Fan (if available)
Do not block the air inlet and outlet openings when storing food, otherwise
air circulation provided by the turbo fan will be impaired.
Accessories
Extra Chill Drawer (In some models)
Ideal to preserve the taste and texture of fresh cuts and cheese. The pull out
drawer assures an environment with a lower temperature compared to the rest of
the fridge, thanks to the active circulation of cold air.
Turbo fan
EN -14-
Extra Chill Drawer
CustomFlex (In some models)
CustomFlex offers you the freedom to customize the space in your refrigerator.
Inside of the door there are a storage container and mobile containers, so you
can tailor the space to your needs. The containers are even removable, so you
can remove them from the refrigerator for easy access.
The Fresh Dial (In some models)
If the crisper is full, the fresh dial located in front of the crisper should
be opened. This allows the air in the crisper and the humidity rate to be
controlled, to increase the life of food within. The dial, located behind the
shelf, must be opened if any condensation is seen on the glass shelf.
Fresh dial
Visual and text descriptions in the accessories section may vary according to
the model of your appliance.
EN -15-
PART – 3. ARRANGING FOOD IN THE APPLIANCE
· Fresh food compartment is the one marked (on the rating plate) with .
· To reduce humidity and avoid the consequent formation of frost, always store
liquids in sealed containers in the refrigerator. Frost tends to concentrate
in the coldest parts of the evaporating liquid and, in time, your appliance
will require more frequent defrosting.
· Never place warm food in the refrigerator. Warm food should be allowed to
cool at room temperature and should be arranged to ensure adequate air
circulation in the refrigerator compartment.
· Make sure no items are in direct contact with the rear wall of the appliance
as frost will develop and packaging will stick to it. Do not open the
refrigerator door frequently.
· We recommend that meat and clean fish are loosely wrapped and stored on the
glass shelf just above the vegetable bin where the air is cooler, as this
provides the best storage conditions.
· Store loose fruit and vegetable items in the crisper containers.
· Store loose fruit and vegetables in the crisper.
· Storing fruit and vegetables separately helps prevent ethylene-sensitive
vegetables (green leaves, broccoli, carrot, etc.) being affected by ethylene-
releaser fruits (banana, peach, apricot, fig etc.).
· Do not put wet vegetables into the refrigerator.
· Storage time for all food products depends on the initial quality of the
food and an uninterrupted refrigeration cycle before refrigerator storage.
· To avoid cross-contamination do not store meat products with fruit and
vegetables. Water leaking from meat may contaminate other products in the
refrigerator. You should package meat products and clean any leakages on the
shelves.
· Do not put food in front of the air flow passage.
· Consume packaged foods before the recommended expiry date. NOTE: Most
efficient use of energy is ensured in the configuration with the drawers in
the bottom part of the appliance, and shelves evenly distributed, position of
door bins
does not affect energy consumption.
NOTE: Potatoes, onions and garlic should not be stored in the refrigerator.
The table below is a quick guide to show you the most efficient way to store the major food groups in your refrigerator compartment.
Food
Vegetables and fruits
Meat and fish Fresh cheese Butter and margarine
Bottled products e.g. milk and yoghurt
Eggs Cooked food
Maximum storage time
How and where to store
1 week
Vegetable bin
2 – 3 Days
Wrap in plastic foil, bags, or in a meat container and store on the glass shelf
3 – 4 Days
On the designated door shelf
1 week
On the designated door shelf
Until the expiry date recommended by the producer
On the designated door shelf
1 month
On the designated egg shelf
2 Days
All shelves
EN -16-
PART – 4. CLEANING AND MAINTENANCE
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance.
After washing, rinse with clean water and dry carefully. When you have
finished cleaning, reconnect the plug to the mains supply with dry hands. ·
Make sure that no water enters the lamp housing and other electrical
components.
· The appliance should be cleaned regularly using a solution of bicarbonate of
soda and lukewarm water.
· Clean the accessories separately by hand with soap and water. Do not wash
accessories in a dish washer.
· Clean the condenser with a brush at least twice a year. This will help you
to save on energy costs and increase productivity.
The power supply must be disconnected during cleaning. Replacing LED Lighting
If your appliance has LED lighting contact the help desk as this should be
changed by authorized personnel only.
EN -17-
PART – 5. TRANSPORTATION AND CHANGING OF INSTALLATION POSITION
Transportation and Changing Positioning
· The original packaging and foam may be kept for re-transportation
(optional).
· Fasten your appliance with thick packaging, bands or strong cords and follow
the instructions for transportation on the packaging.
· Remove all movable parts (shelves, accessories, vegetable bins, and so on)
or fix them into the appliance against shocks using bands when re-positioning
or transporting.
Always carry your appliance in the upright position.
Repositioning the Door
· It is not possible to change the opening direction of your appliance door if
door handles are installed on the front surface of the appliance door.
· It is possible to change the opening direction of the door on models without
handles and models with handles mounted on the sides.
· If the door-opening direction of your appliance can be changed, contact the
nearest Authorised Service Centre to change the opening direction.
PART – 6. BEFORE CALLING YOUR AFTER SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler is at improper
levels or if a problem occurs with the appliance. In case of a problem within
the fridge, the alarm led will release red light.
Alarm indicator LED is turning on
MEANING
WHY
WHAT TO DO
“Failure” Warning
There is/are some part(s) out of order or there is a failure in the cooling process. The product is plugged for the first time or a long-time power interruption for 1 hour.
Check the door is open or not and check if the product working 1 hour. If the door is not open and the product had worked 1 hour, call service for assistance as soon as possible.
If your fridge is not working properly, it may be a minor problem, therefore check the following, before calling an electrician to save time and money.
Your fridge is not operating
Check if: · There is power · The plug is correctly connected to the socket · The plug or mains fuse has blown · The socket is faulty. Examine this by plugging your fridge into a working socket.
EN -18-
What to do if your appliance performs poorly; Check that;
· You have not overloaded the appliance , · The fridge temperature set to 8. ·
The door is closed perfectly , · There is no dust on the condenser , · There
is enough place at the rear and side walls. Your fridge is operating noisily
Cracking (ice cracking) noise occurs: · During automatic defrosting. · When
the appliance is cooled or warmed (due to expansion of appliance material).
Motor noise: Indicates the compressor is operating normally. The compressor
may cause more noise for a short time when it is first activated. Bubbling
noise and splash: Due to the flow of the refrigerant in the tubes of the
system. Air blowing noise: Indicates normal operation of the system due to the
circulation of air. There is a build-up of humidity inside the cooler Check
if: · All food is packed properly. Containers must be dry before being placed
in the fridge. · The fridge door is opened frequently. Humidity of the room
enters the fridge when the doors are opened. Humidity increases faster when
the doors are opened more frequently, especially if the humidity of the room
is high. The door is not opening and closing properly Check if: · There is
food or packaging preventing the door from closing · The door compartments,
shelves and drawers are placed properly · The door joints are broken or torn ·
Your fridge is level. Recommendations To stop the appliance completely, unplug
from main socket (for cleaning and when the door is left open).
EN -19-
Hints for Energy Saving
1. Install the appliance in a cool, well-ventilated room, but not in direct
sunlight and not near a heat source (such as a radiator or oven) otherwise an
insulating plate should be used.
2. Allow warm food and drinks to cool before placing them inside the
appliance. 3. Drinks or other liquids should be covered when inside the
appliance. If left uncovered,
the humidity inside the appliance will increase, therefore the appliance uses
more energy. Keeping drinks and other liquids covered helps preserve their
smell and taste. 4. Avoid keeping the doors open for long periods and opening
the doors too frequently as warm air will enter the appliance and cause the
compressor to switch on unnecessarily often. 5. Keep the covers of the
different temperature compartments ( such as the crisper and chiller) closed.
6. The door gasket must be clean and pliable. In case of wear, if your gasket
is detachable, replace the gasket. If not detachable, you have to replace the
door. 7. Eco mode / default setting function preserves fresh foods while
saving energy. 8. Fresh Food Compartment (Fridge): Most efficient use of
energy is ensured in the configuration with the drawers in the bottom part of
the appliance, and shelves evenly.
EN -20-
PART – 7. DESCRIPTION OF THE APPLIANCE
1
11
2
3 10
4 5 6
9 7
8
This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model.
-
Control panel 2) Refrigerator shelves 3) Wine rack (Bottle shelf) 4) Upper crisper 5) Chill Drawer 6) Crisper cover
-
Crisper 8) Levelling feet 9) Bottle shelf 10) CustomFlex* 11) Egg holder
*In some models
EN -21-
PART – 8. TECHNICAL DATA
The technical information is situated in the rating plate on the internal side
of the appliance and on the energy label. The QR code on the energy label
supplied with the appliance provides a web link to the information related to
the performance of the appliance in the EU EPREL database. Keep the energy
label for reference together with the user manual and all other documents
provided with this appliance. It is also possible to find the same information
in EPREL using the link https://eprel.ec.europa.eu and the model name and
product number that you find on the rating plate of the appliance. See the
link www.theenergylabel.eu for detailed information about the energy label.
PART – 9. INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification
shall be compliant with EN 62552. Ventilation requirements, recess dimensions
and minimum rear clearances shall be as stated in this User Manual at PART 1.
Please contact the manufacturer for any other further information, including
loading plans.
EN -22-
Do you want to install the cabinets in Side By Side Mode?
NO No special kit needed
YES
Do you want to install the cabinet in Side By Side Mode in a Niche?
EN -23-
At least 1205 mm
NO
How much space you have for Free Standing Side by Side installation ?
Less than 1205 mm
YES Which handle has your cabinets?
Fixed
QDO (Quick Door Opening)
Joining Kit 10mm suggested Electrolux accessory to be selected
among codes: 902980250 for Stainless steel
902980249 for White 902980251 for Black
Classified as Internal
You need at least 5 mm space between the two appliances (the niche width at
least 1200 mm)
How much space you have?
5mm (the niche width at
least 1200 mm)
Joining Kit 5mm strongly required Electrolux accessory to be selected
among codes: 902980247 for Stainless steel
902980246 for White 902980248 for Black
10 mm (the niche width at least 1205 mm)
Joining Kit 10mm suggested Electrolux accessory to be selected
among codes: 902980250 for Stainless steel
902980249 for White 902980251 for Black
You need at least 10 mm space between
the two appliances (i.e. the niche width must be at least 1205 mm) Joining Kit
suggested:
902980250 for Stainless steel
902980249 for White
902980251 for Black
www.electrolux.com/shop
52412353
PNC CODE: 923421325 PNC CODE: 923421326
References
- Electrolux
- Electrolux
- Register Your Appliance – Product Registration – Electrolux
- APPLiA Europe | The new Energy Label | Belgium
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>