FotdioX P60, P120 LED Panel Light User Manual

FotdioX P60, P120 LED Panel Light

Introduction

Thank you for choosing the P60/P120 LED panel from Fotodiox.

1. High-power LED light source with accurate color temperature, CRI/TLCI 95 and a working life of more than 50,000 hours.
2. Built-in diffusion technology provides soft, clean light.
3. Designed with an all-aluminum frame for durability and enhanced heat dissipation to help ensure a long product life.
4. Integrated V-lock battery plate for battery power on the go (batteries sold separately).
5. The LCD displays real-time data.
6. The sturdy, all-metal yoke allows for mounting on stands or hanging in any suitable location.
7. Low-heat LED technology provides stable, consistent, and accurate lighting under varying conditions.
8. Flicker-free and uniformly dimmable from 0%-100% due to the PWM integrated design.
9. Mobile APP is compatible with convenient and fast control.
10. DMX512 compatible.
11. Bi-color design is adjustable from 2700K to 6500K.
12. Suitable for indoor or outdoor photography and videography. Great for studio or location shoots including TV, film, portrait photography, and more.

Precaution

1. Do not disassemble or modify the light.
2. Do not operate with wet hands, doing so may cause electric shock.
3. Do not operate in environments near flammable gasses or volatile liquids as this may increase the risk of explosion/fire.
4. Do not operate in enclosed spaces where heat buildup can be extreme, such as a car on a sunny day. The increased heat may cause premature failure of the lighting unit.
5. Do not touch the plug or AC adapter with wet hands; doing so may cause electric shock.
6. Do not damage, disassemble, pull, or twist the power cord, otherwise, it may cause fire or electric shock.
7. Do not place under heavy objects.
8. Avoid impact on the LCD display to prevent damage.
9. Avoid dust and debris buildup on the light surface as this will change illuminance and color temperature.
10. Keep the light surface clean with a soft, dry cloth.
11. Use ONLY the provided AC power adapter; using other AC power adapters may result in damage to the light. Should you need a replacement please contacttechsupport@fotodiox.com.
12. When using accessories, such as power adapters, please ensure that these are installed properly to avoid damage to the light or other safety issues caused by falling accessories.
13. Please loosen the yoke locking knob before adjusting the angle of the lamp body.

Part Name(P60 pictured)

P60

• A: Front LED panel
• B: Barn door
• C: V-lock Battery Plate
• D: V-lock Release Button
• E: OMX out
• F: DMX in
• G: 4-pin XLR Power socket
• H: Yoke
• I: Yoke Locking Screw
• J: Selector Knob (with push button functionality)
• K: Power Switch
• L: Operation Buttons
• M: LCD Screen
• N: Mount Locking Screw

Product specifications

fixture:DC15V
S i ze| 360 x 380 x 77mm| 600 x 380 x 77mm
Net w eight| 3.2kg| 4.5kg
Item included| LED panel light xl, Power co| RDX, AC power adapter xl,
Velcro strapx2

All specifications and parameters of this product are tested according to the company’s laboratory samples. The product may be slightly different and does not affect normal use. Design and specifications are subject to change without notice.

Usage

Lamp Installation

1. Loosen the stand mount locking screw by turning counterclockwise. Place the mount on the light stand and secure the screw by turning it clockwise. Please ensure the light is fully mounted onto the support and the screw is securely fastened.
2. To adjust the light to the desired angle, turn the yoke locking screw counterclockwise to loosen. Move the light to the desired position, then tighten the yoke locking screw by turning clockwise.

installing the AC power adapter

1. AV-lock mount is pre-installed on the AC power adapter.
2. Install the power adapter with holder into the V-lock plate on the back of the light. It is successfully installed when you hear the locking mechanism click.
3. To remove the AC power adapter, press down on the V-lock release button and push the adapter out of the V-lock plate.

Connecting the power supply

1. Connect the power adapter to the light fixture by inserting the power adapter 4-pin XLR plug into the DC power input socket on the lower left side of the light fixture. Connect the AC power cable to the external AC power (AC100-240V).
2. AV-Lock plate is pre-installed on the back of the light for the battery power supply. To remove the battery, press the V-lock release button and push the battery out of the Vlock plate.

Power ON/OFF

• Press the power switch on the right side of the power control box, the light is on.
• The buttons on the control panels are for brightness, color temperature, special effects, language, DMX, and address settings.

Brightness, Color Temperature Mode

• Press the brightness(INT) or CCT button to enter the brightness/color INT, 100% temperature interface. Short press the multi-function knob to switch between brightness and color temperature adjustments; turn the knob to adjust the desired setting.
• Brightness is adjustable from 0-100%. Color temperature is adjustable 2700K-6500K.

FX Mode

Press the FX button to enter the special effect interface. Short press the multi-function knob to switch between brightness, color temperature, FX mode, and speed settings; turn the knob to adjust the desired setting. Brightness and speed are adjustable 0-100%. Color temperature is adjustable 2700K-6500K.

Language Mode
Press the LANG. button to enter the language interface. Turn the multi- function knob to switch between Chinese and English modes.

DMX Mode
Press the DMX button to enter the DMX interface, and turn the multi-function knob to adjust the DMX address 1-512.

Remote control Mode
Press the 2.4G button to enter the address interface, and turn the multi- function knob to adjust the remote control address 1-12. Remarks: RMT-OFF is the remote control lock function, and the operation light is not controlled.

How to use the Lishuai APP
You can search Lishuai in the APP store or Android market or scan the OR code below to download the APP to control lights.

Open the APP, select the panel light to enter and choose product model P60/P120, click to search device, and enter the control interface. Set the APP address the same as on the light. The APP address can be set to 1-12. Now the light can be controlled by the mobile APP. The brightness, color temperature, special effects, and language can be adjusted.

DMX connection
When operating DMX, connect the DMX cable to the console (the specific wiring is shown in the diagram below), then set the OMX address to match the console address. Note: DMX cable is sold separately.

DMX control
Please see below the details of the DMX address on LCD and the corresponding channels on the DMX console.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>