Electrolux EHVS75S1AU Ultimate700 Vacuum Cleaner Instruction Manual

Electrolux EHVS75S1AU Ultimate700 Vacuum Cleaner

Specifications

• Model: Ultimate700TM
• Models: EHVS75S1AU, EHVS75S1AO, EHVS75W1AY
• Usage: Household use only
• Charging Time: 4.5 hours
• Battery Status Indicators: 100%, 50-75%, 25-50%, 0%

Product Information:

The Ultimate700TM vacuum cleaner is designed for household use only. It comes with various accessories for different cleaning needs, including the PowerPro Hard Floor Nozzle and PetPro+ Nozzle. The vacuum cleaner features a battery that provides a runtime of up to 4.5 hours on a full charge.

Product Usage Instructions

Product Assembly & Charging:

Before using the vacuum cleaner, ensure it is fully assembled and charged.

• Connect the charger (KSC-18W-350050VU) to the charging stand.
• Insert the vacuum cleaner into the charging stand to charge. The battery status indicators will show the charging progress.

Accessories:

The vacuum cleaner comes with different nozzles for specific cleaning tasks.

• PowerPro Hard Floor Nozzle: Use for hard floor surfaces. Clean and maintain as per the manual instructions.
• PetPro+ Nozzle: Ideal for pet hair removal. Follow the maintenance instructions for optimal performance.

Troubleshooting

Problem: The product stops or doesn’t start

Cause: The battery is empty or water has entered the product.

Solution: Charge the vacuum cleaner if the battery is empty. If water has entered, let it dry for 48 hours. Do not place it on the charging stand if water has entered.

Problem: Loss of performance

Cause: Nozzle blockage or full dust bin.

Solution: Clean the brush roll and check for clogs in the nozzle. Empty the dust bin and wash filters according to the manual.

Problem: Brush roll doesn’t rotate

Cause: Brush roll protection mode or incorrect placement in charging stand.

Solution: Turn off the cleaner and restart to activate the brush roll. Ensure correct placement in the charging stand with proper contact between plates.

Problem: Product is not charging

Cause: Charger plug not connected or hand unit display issue.

Solution: Check the charger connection and ensure proper display of battery level. If dark display, remove and reinsert the cleaner in the charging stand.

Frequently Asked Questions

Q: Can I use this vacuum cleaner for commercial purposes?

A: No, this vacuum cleaner is designed for household use only.

Q: How often should I clean the filters?

A: Clean the filters regularly as per the instruction manual, and replace them if necessary.

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury

WARNING

To reduce the risk of fire, electric shock, or injury

• Do not use outdoors or on wet surfaces.

• Do not operate the vacuum cleaner or charger if it has been damaged in any way. If cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

• To avoid excessive heat and damage to the unit or batteries, do not operate the vacuum cleaner while charging.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Only use the charging adapter that was provided with the product.

• Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

• Do not handle the charger or vacuum cleaner with wet hands.

• DO NOT MUTILATE OR INCINERATE BATTERIES AS THEY WILL EXPLODE AT HIGH TEMPERATURES.

• Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid gets on skin, wash quickly with water. If the iquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.

• While there is no shock hazard from electrical terminals located on the vacuum, a burn could result from metal objects being inserted into the terminal areas. Vacuum cleaner terminals should always be kept free of objects.

• This vacuum cleaner creates suction and has a revolving brushroll. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit would accidentally be turned on.

• Use extra care when cleaning on stairs.

• Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance.
  Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.

• Do not use to pick up flammable or combustible liquids such as gasoline, or use on areas where they may be present.

• Do not expose the appliance to fire or excessive temperature. Exposure to fire or temperature above 265 °F may cause explosion.

• Locate charger indoors in a cool, dry area, not exposed to weather to avoid electrical shock and/or cleaner damage.

• Keep your work area well lighted.

• Unplug electrical appliances before vacuuming them.

• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained

• Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

• Always turn off this appliance before connecting or disconnecting motorized nozzle.

To protect the motor, battery and electronics the product should not be operated in:

• An ambient temperature below 41 °F or exceeding 95 °F.
• A humidity level below 20 % or exceeding 80 % (noncondensing).
If the product is stored for an extended time period (without usage or continuous charging), we recommend to store the product
• indoors and in temperature between 41 °F to 95 °F , and at a humidity between 20 % to 80 %.
• with the batteries charged at 50 % capacity or more.
• Do not pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated
surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Changes or modifications of this product is not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
• Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

Caution:

Follow the Manufacturer’s instructions. Risk of Fire and Burns. Do Not Open, Crush, Heat Above 140 °F or Incinerate

Product Assembly & Charging

Accessories

Dust Bin & Filter Maintenance

PowerPro Bristle Nozzle Nozzle Maintenance

PowerPro Hard Floor Nozzle Maintenance

PetPro+ Nozzle Maintenance

TROUBLESHOOTING

The product stops or doesn’t start

| The battery is empty (last LED blinks)| Charge the vacuum cleaner.

Water / Liquid has been sucked into the product.

| Stop the product and let it dry for 48h.

Do not put the product in the charging stand!

If the product is still not working anymore contact an authorized Electrolux service center.

Note: Damage to the motor caused by water or liquids is not covered by the warranty.

Loss of performance

| ****

Nozzle does not pick up dust or dirt as expected

| Make sure to use correct nozzle for each floor type. Hard floor – bristle nozzle, fluffy nozzle

Carpet – bristle nozzle

Nozzle brush or fluffy roll is blocked with hair and dirt.| Remove floor nozzle and clean brush roll according to instruction manual
Tube and/or nozzle neck is blocked| Check if any clogging happened in nozzle/tube

Dust bin may be full or filters has been clogged or are dirty

| Empty dust bin and wash filters according to the instruction manual. If need to replace and buy new filters (www.electrolux.com)

Brush roll doesn’t rotate

| Brush roll stops when user detaches the previous nozzle & changes to another nozzle while the vaccum cleaner is still on. This is a protection mode.| ****

Turn off the cleaner and re-start “ON” button to activate the brushroll spinning.

Product is

not charging /

No charging indication on hand unit display

| Product is not placed correctly in the charging stand and tube is not in shortest posistion. Cleaner is falling down from charging stand.| ****

Make sure that the contact plates on the back side of vaccum cleaner are in contact with contact plates on charging stand.

Charger plug is not plugged in| Make sure charger plug is connected to charging stand socket and charging adpater is plugged into wall socket.
Charging will not occur if room temperature is below 41 ºF or over 95 ºF to protect battery and electronics| ****

Store/charge the product indoor and in room temperature between 41-95 ºF

Hand unit display is dark and all LED are off after battery pack is fully charged| Take out cleaner from charging stand, press the on/off button or +/- speed button to view Battery level indication. Put cleaner back in charging stand.
Battery Pack temperature is too high (~113ºF)/low (~41ºF), charging not yet started| Put appliance at ambient temperature condition, wait until temperature cool down/ raised up
Filter icon appear on hand unit display| Filter indication that filters needs to be cleaned| Clean filters according to instruction manual. After cleaning press ON/OFF button for 3 sec and filter icon will disappear. If need to replace and buy new filters (www.electrolux.com)
Warning triangle appear on hand unit display| The product may be overheated in motor or battery pack| Let product rest and cool down
Nozzle or tube can be clogged| Check if any clogging happened in nozzle/tube
Problem| Cause| Solution
---|---|---

No charging indication on charge stand

| ****

Hand unit battery pack is not fully charged and will not start charging extra battery pack on charging stand until hand unit battery pack is fully charged ( up to 2.5 hours)

| This can only happen to products with possible to charge in the base plate of charging stand.

Battery pack on hand unit will always start charging first and then charging will start for the battery pack in charging stand base and the LED indication should start to light up.

Battery pack not fully inserted| Take out battery pack and insert again
Battery Pack temperature is too high (~113ºF)/low (~41ºF), charging not yet started| Put appliance at ambient temperature condition, wait until temperature cool down/ raised up
Battery pack is broken, need to be replaced.| Contact Electrolux service center. If need to replace and buy new battery pack (www.electrolux.com)
Wrong battery pack is being used for this product.| Make sure correct battery pack is being used
Charging is taking more than longer than

4.5 hours

| ****

Room temperture is over 95 ºF

| Charging time will be longer if temperature is high, which is normal, Store/charge product in a normal room temperature
Headlights on floor nozzle do not work| Brush roll is jammed| Remove brush roll and clean brush roll from hair and fibers.

WARNING

This product contains Lithium-ion rechargable batteries. Do not dispose of Lithium-ion batteries with household waste. Federal and State regulations required proper recycling or disposal of Lithium-ion batteries. Contact your State and Local government agencies for recycle and disposal instructions.

Limited Warranty

Your appliance is covered by a two year limited warranty. For two years from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.

Exclusions

This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Products used in a commercial setting.
6. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.
7. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
8. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.
9. Service calls to repair or replace appliance light bulbs, air filters, other consumables, or knobs, handles, or other cosmetic parts.
10. Pickup and delivery costs; your appliance is designed to be repaired in the home.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during transportation or installation, including but not limited to floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

If You Need Service

Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below. This warranty only applies in the USA, Puerto Rico and Canada. In the USA and Puerto Rico, your appliance is warranted by Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.

• Web: electrolux.com
• (USA) ; electrolux.ca (Canada)
• Phone: (800)-896-9756

ORDER GENIUNE ACCESSORIES AND REPLACEMENT PARTS

• electrolux.com (USA)
• electrolux.ca (Canada

(800)-896-9756

Model index:

• EHVS75S1AU
• EHVS75S1AO
• EHVS75W1AY

Part No / Description:

• ELPAVAF67 Electrolux Ultimate700™ Vacuum Filter Set

USA

• (800)-896-9756
• Electrolux Appliances North America
• 10200 David Taylor Drive
• Charlotte, NC 28262

Canada

• (800)-896-9756
• Electrolux Canada Corp.
• 5855 Terry Fox Way
• Mississauga, Ontario,
• Canada L5V 3E4

References

• Home Appliances: Kitchen Appliances, Washers & Dryers | Electrolux

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>