Yunguo YGM1 Wireless Stereo Earphone User Manual
- June 4, 2024
- Yunguo
Table of Contents
Yunguo YGM1 Wireless Stereo Earphone
Packages List
Diagram
Functional definition for the touch
| | | TripleClic| Press and hold
---|---|---|---|---
Pairing/
JXJweroff
| | , Pairing stale/removing
pairing list
|
TripleClic
|
3S/PowerOn SS/PowerOff
Pairing| | | | 1S/Wake up
Siri/ Shut do
-wn Siri
| Pause/Play| Last song/next song| volume+volume-
Calling Mode
| Incoming call:
Answer the call
In a call: Hang up| | |
incoming call IS/refuse the call
Manual for Quick Start
- Power On : After power on, hold the L/R earphones close to each other for about 10 seconds
- The L/R earphones will automatically connect, and the LED state will change to White/Blue alternate, this means the L/R era phones are pairing successful
- Turn on the Mobile phones: “settings—Bluetooth in you phones, search for Bluetooth names: YGM1”
- Select the pairing name, the TWS earphones have successfully connected to your mobile phone
- Power Off:
- A: Methods A: Press the Multi-function touch and hold on 5s,the White LED states will twinkle three times
Tips for Charging
The earphone alarms when electricity drains out(supports around 10 misusages), please put the earphone into the charging box
Charging states for Charging box and earphones
Charging for the earphones, Blue LED light on charging completed for earphones, Blue LED light off
Specification
- Max Wattage Power : 5mW
- Bluetooth Version: V5.0
- Supporting Agreement: A2DP/AVRCP/HFP/AVDTP
- Connection Range: 10m
- Speaker Diameter 6mm
- Speaker Sensitivity: 115t3dB
- Speaker Impedance: 320
- Speaker Frequency Response: 20Hz -20KHz
- Earbud Weight : About 4gx2
- Earbud Battery Capacity: 30 mAh
- Charging box to charge earphones: 3-4 times
- Playing time : About 3 hours
- Earbud Charging Time: About 2 hours
- Earbud Case Weight: About 34.5g
- Charging Case Battery Capacity: 250 mAh
- Charging Time For The Case About 2 hours
- Standby Time : About 200 hours
- Product Size : 63X30x29 (mm)
Warnings
Please kindly keep the warranty and purchase certificate,these are for the warranty
Name and Content for Toxic and Harmful Substances
Identification of harmful substances or elements in accordance with the measures for pollution control and management of electronic information products
According for SJ/T 11364 standard
O: The harmful substance content below the limits requiresin GB/T 26572.
X: The harmful substance exceeds the limits requiresin GB/T 26572.
up is printed on electronics for selling in China. The number in the circle is the environmental service life
Warranty Card/ Certificate
- Please kindly keep the warranty card and purchase certificate,these are for the warranty
- Product Warranty(supports 1-year warranty except for man-made damage)
user Name
| |
Contact No
|
---|---|---|---
Product No| | Purchasing Date|
Address|
Problem|
Maintenance record
| No. | Date | Maintenance Record | Repairman |
|---|---|---|---|
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed. This equiment generates use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co- mmunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
FCC ID : 2A8GH-YGM 1A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>