sensitron SMART3G-C3 with Infrared Sensor User Manual
- October 30, 2023
- sensitron
Table of Contents
SMART3G-C3
with infrared sensor
SMART3G-C3 gas detector is designed to meet industrial requirements; the
enclosure is explosion proof and can be installed in ATEX Zone 2 and, when
equipped with dust adapter, in Zone 22.
The sensing element is placed in the stainless steel head with 47.5 mm
diameter.
The infrared sensors employed for the flammable and refrigerant gas detection
are poison free, with high accuracy and a long lifetime.
The gas detector has a 12-24 Vdc power supply and a standard 4-20 mA 3-wires
output. Optionally, the SMART3G-C3 can be equipped with serial RS485
communication and a 1 or 3 relays board.
The enclosure has dimensions 106 x 160 x 62 mm, on the upper side there’s a
M20 cable gland.
The gas detector is certification pending and it can be ATEX marked as
follows:
0722 II 3G Ex db ec nC IIC T5 Gb
Or, when equipped with dust adapter:
0722 II 3GD Ex db ec nC IIC T5 Gb
Ex tb IIIC T100°C Db
IP65
SMART3G-C3 is SIL2 hardware and SIL3 software; with a redundant system also
the hardware is SIL3.
Sensor
Application| Industrial area, ATEX Zone 2 e Zone 22 (when
equipped with dust adapter, optional)
---|---
Sensing element| Infrared
Predicted sensor lifetime| >5 years
Gas detected| Flammable, refrigerant and CO2
Full scale| 0 – 100% LFL flammable gas
0 – 2000 ppm refrigerant gas
0-2%Vol; 0-5%Vol; 0-30%Vol; 0-100%Vol CO
Electrical data
| Power supply | 12-24 Vdc |
|---|---|
| Output | Analogue 4-20 mA output; 1 or 3 relay board |
(optional); serial RS485 output (optional)
Maximum dissipated power| 5.4 W
Relays contact ratings| 1.0 A at 24 Vdc (optional board)
Optical indications| –
Acoustic indications| –
Hall effect sensor| –
Environmental conditions
| Storage temperature | -40 / +85°C |
|---|---|
| Operating temperature | -40 / +60°C |
| Operating humidity | 0 / 90% RH |
External case
Material| Enclosure: Aluminium
Sensor head: stainless steel
---|---
Protection mode| Ex e: Increased safety protection mode
Ex nC: Enclosed equipment protection mode
Ex d : Explosion proof enclosure
Ex t : Equipment dust ignition protection by enclosure (when equipped with
dust adapter, optional)
Dimensions| 106 x 160 x 62 mm
Weight| 1023 g
Cable entries| 1 x M20
IP grade| IP55 (certification pending)
Compliance
| EMC | EN 61000-6-3:2007 + A1:2011; EN 50270:2015 |
|---|
ATEX
(certification pending)| ATEX directive 2014/34/EU
EN IEC 60079-0:2018
EN 60079-1:2014
EN 60079-7:2015
EN 60079-15:2010
EN 60079-31:2014
SIL| EN 61508:2010 Parts 1, 2, 3, 4, 5, 6, 7
EN50402:2017
Product codes
Flammable gas detectors 0-100% LFL, 12-24 Vdc
S2623ME| Methane (0-100%LFL) gas detector
S2653BU| Butane (0-100%LFL) gas detector
S2653PR| Propane (0-100%LFL) gas detector
S2653GP| LPG (0-100%LFL) gas detector
S2653R454B| R454B (0-100%LFL) gas detector
S3424R32| R32 (0-100%LFL) gas detector
S3428R1234YF| R1234YF (0-100%LFL) gas detector
S3432R1234ZE| R1234ZE (0-100%LFL) gas detector
Refrigerant gas detectors 0-2000 ppm, 12-24 Vdc
S3942R32| R32 (0 – 2000 ppm) gas detector
S3595R134A| R134A (0 – 2000 ppm) gas detector
S3598SF6| SF6 (0 – 2000 ppm) gas detector
S3020R125| R125 (0 – 2000 ppm) gas detector
S3021R1234YF| R1234YF (0 – 2000 ppm) gas detector
S3025R1234ZE| R1234ZE (0 – 2000 ppm) gas detector
S3022R404A| R404A (0 – 2000 ppm) gas detector
S3023R407A| R407A (0 – 2000 ppm) gas detector
S3918R407F| R407F (0 – 2000 ppm) gas detector
S3921R449A| R449A (0 – 2000 ppm) gas detector
S3024R507| R507 (0 – 2000 ppm) gas detector
S3016R410A| R410A (0 – 2000 ppm) gas detector
S3950R417A| R417A (0 – 2000 ppm) gas detector
S3954R448| R448 (0 – 2000 ppm) gas detector
S5066R513A| R513A (0 – 2000 ppm) gas detector
Carbon dioxide gas detectors, 12-24 Vdc
S2649CO2| CO2 (0-2% Vol )gas detector
S2650CO2| CO2 (0-5% Vol) gas detector
S2444CO2| CO2 (0-30% Vol) gas detector
S2444CO2| CO2 (0-5000 ppm) gas detector
S2629CO2| CO2 (0-100% Vol) gas detector
Mechanical drawings
Sensitron srl works for a constant improvement of its products and reserves the right to change the technical data without notice. To have the updated product characteristics check on the website www.sensitron.it or write an e-mail to sales@sensitron.it
DS4747E R5 19/10/2022
Sensitron srl, Viale della Repubblica 48, Cornaredo (MI) – 20007
sales@sensitron.it
TEL. +39 0293548155 FAX. +39 0293548089
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>