Pretul 26007 Protector Facial User Guide
- October 30, 2023
- Pretul
Table of Contents
Pretul 26007 Protector Facial
Product Information
The product is a face shield that provides protection to the user’s face from external elements. The face shield consists of various components, including a clear visor, which is the main protective element. The product requires periodic maintenance to ensure its longevity and effectiveness.
Product Usage Instructions
- Before using the face shield, ensure that it is appropriate for the intended use.
- Wear the face shield to cover your face entirely.
- While using the product, be aware of the potential dangers and adhere to all limitations, warnings, and instructions provided in the user manual.
- After use, clean the face shield and its components with water and neutral soap.
- Use a soft brush to rub the face shield (except for the clear visor).
- Avoid using solvents as they may cause damage to the face shield.
- Avoid puncturing the face shield during cleaning or use.
- Periodically check the face shield to ensure that it is in good condition and functioning correctly.
It is important to note that failure to consider the limitations, warnings, instructions, and maintenance procedures may result in serious health injuries. Therefore, it is essential to follow all guidelines provided in the user manual.
- The face shield eliminates forehead injury, provides protection against foreign particles, dust, heat and is impact resistant
- With internal cushion an excellent fit
- Maximum face protection with excellent visibility
- Polypropylene body with polycarbonate visor
- Lightweight and comfortable
Instructions
- Unscrew the side adjusting nuts. (Fig.1)
- Without removing the adjusting screw assembly and tighten the nut.
- Verify that the visor does not become separated from the shield. (Fig. 2)
- Place the shield and pull the headband to obtain a proper fit (Fig. 3)
IMPORTANT
- Risk of serious heath injury if limitations, warnings, instructions and maintenance are not considered.
WARNING
- The clear visor is not break-proof. It does not protect against strong impacts, explosions or corrosive liquids.
- Scratches on the visor greatly reduce visibility and protection. Replace then immediately.
- It does not protect against molten metal splash, hot solids or electrical hazard.
- This face shield does not provides unlimited protection.
- With this device appropriate glasses or lenses should be worn where danger exists.
MAINTENANCE
- The face shield should be cheked periodically. The face shield and its components should be cleaned with water and neutral soap.
- Rub with a soft brush (except the clear visor). Do not use solvents. Avoid puncturing the face shield.
Read User Manual Online (PDF format)
Loading......