DVIGEAR DVI-7365 HDMI 4K Fiber Optic Extender User Manual
- October 30, 2023
- DVIGEAR
Table of Contents
DVIGEAR DVI-7365 HDMI 4K Fiber Optic Extender
INTRODUCION
Designed for Extreme Requirements — The DVI-7365 is a high performance, cost-effective, 4K Multiport Optical Extender designed to meet and exceed even the most demanding system requirements. It supports a wide array of signal types with or without HDCP content protection, provides long-distance extension over a single fiber cable, and supports ultra-high resolutions up to 4K (UHD) at 60Hz (4:4:4).
Multiple Signals Extended over a Single Cable — This multiport optical extender supports uncompressed HDMI 4K /60p, embedded audio, bidirectional IR, RS 232 and two 10/100 BaseT Ethernet ports, using only a single fiber optic cable. It can extend these signals over cable distances of up to 1.86 mi. (3,000 meters). For added versatility, these units provide Advanced EDID Management with four operating modes: Pass-through, Learn 1, Learn 2, and Factory Default.
Fiber Optic Technology — Each extender set consists of an optical transmitter unit and an optical receiver unit. The transmitter converts the AV signals into light pulses for transmission over a single strand of Multi-Mode or Single-Mode fiber optic cable. The receiver converts the light pulses back to AV signals for the display, as well as other downstream devices. By using advanced fiber optic technology, without any compression, this product provides superior picture quality over greater distances than other extension methods, such as copper cables or CAT-X extenders. Together, these features make the DVI-7365 the ideal, cost-effective solution for system designers and integrators who need to support high resolution HDMI signals over extreme distances with flawless image quality
FEATURES
- Supports resolutions up to 4096×2160 /60p (4:4:4), without using compression
- Extends HDMI, Ethernet (10/100Base-T), RS-232, and bidirectional IR over a single strand of fiber optic cable
- HDCP 1.4 and HDCP 2.2 compliant
- Maximum extension distances: Single-Mode Fiber: > 1.86 miles (~ 3,000 m) OM3 Multi-Mode Fiber: > 1,000 ft. (~ 300 m)
- Four Advanced EDID Management Modes: Pass-through, Learn 1, Learn 2, and Factory Default
- Optical fiber transmission is immune to environmental signal noise
- Low RFI / EMI profile for sensitive applications
- Locking DC power connectors for added security and reliability
- Heavy-duty mounting brackets are included
STAND-ALONE DIAGRAM
DVI-7365-TX INTERNAL BLOCK DIAGRAM
DVI-7365-RX INTERNAL BLOCK DIAGRAM
DVI-7365-TX Front View
DVI-7365-TX Rear View
DVI-7365-RX Front View
DVI-7365-RX Rear View
SPECIFICATIONS
Performance
Standards Compliance| HDMI 4K /60p, DVI v1.0, HDCP v2.2
Maximum Pixel Clock Frequency| 600 MHz
Maximum Video Bit Rate| 6 Gbps. / 18 Gbps. (Aggregate)
Total System Jitter (I/O)| 0.6 UI maximum
Inter-Channel Skew| 2 nanoseconds maximum
Ethernet| 10/100 BaseT
Supported Color Depth| Up to 12-bit per pixel
Supported Resolutions| Up to 4K: 4096 x 2160 /60Hz (4:4:4)
Digital Audio Support| Embedded HDMI digital audio up to 8-channel (7.1) LPCM,
48 kHz, 24-bit audio capability
Connections
HDMI Input / HDMI Output| 1 ea. 19-pin Female HDMI connector
Optical| 1 ea. LC fiber optic connector
Ethernet| 2 ea. RJ-45 female connector
RS-232| 1 ea. 3-pin Phoenix connector
IR Input / IR Output| IR IN: 1 ea. 3.5mm stereo mini-jack; IR OUT: 1 ea. 3.5mm
mini-jack
Power| 1 ea. Screw-Locking 2.1 / 5.5 mm female connector
Control
TX Unit| Front Panel: EDID Learn button, LEDs for EDID, Power, Optical Link,
HPD and Ethernet Back Panel: EDID Mode selection via 2x DIP switches
RX Unit| LEDs for Power, Optical Link, HPD and Ethernet
Optical
Optical Technology| CWDM (Course Wavelength Division Multiplexing) using 6
optical wavelengths
Laser Diodes| 1270/1290/1310/1330nm 10Gbps CWDM DFB Lasers; 1490nm/1550nm
2.5Gb/s CWDM DFB Lasers
Photo Diodes| 1100 – 1620nm PIN Photo Detectors
WDM Filter| Integrated 1270nm / 1290nm / 1310nm / 1330nm / 1490nm / 1550nm
filter
Optical Wavelengths / Actual Data Rates| TMDS Signals: 1270nm / 1290nm /
1310nm / 1330nm = 6.0 Gbps. DDC, IR, RS-232, Ethernet Signals: 1490nm / 1550nm
= 1.25 Gbps.
Optical Link Power Budget| 8.0 dB (minimum)
Cable
Maximum Cable Length (typical)| 9/125μ Single-Mode Fiber: > 1.86 miles
( ~ 3,000 meters) 50/125μ OM3 Multi-Mode Fiber: > 1,000 ft. ( ~ 300
meters)
DVIGear Fiber Cable| OFNP, Plenum rated – additional data and custom lengths
available on request
Cable Jacket| OFNP, Plenum rated, Black PVC Jacket
Cable Outside Diameter| 0.2″ (4.4 mm)
DDC Support
EDID Management / Modes| EDID Pass-through (transparent) EDID Learn 1 / Learn
2 (cached)
Factory Default EDID (1080p 2-Ch audio)
HDCP Support| Supports HDMI signals with or without HDCP encryption
Mechanical
Case Dimensions (H x W x D)| Without Brackets: 1.0″ x 7.5″ x 3.9″ (26.0 x
190.0 x 99.5 mm)
Width with Brackets: 8.5″ (215.5 mm)
Weight| TX Unit: 568g; RX Unit: 563g
Construction| High-impact metal enclosure with jet black finish
Mounting Options| Mounting Brackets are included
Environmental
Operating / Storage Temperature| 14° to +158° F (-10° to +70°C); -40° to +185°
F (-40° to +85°C)
Operating / Storage Humidity| 5% to 80% (non-condensing); 5% to 95% (non-
condensing)
Power Requirements
Optical Transmitter / Receiver| Both TX and RX units must be powered by the
supplied external power adapters.
External AC Power Adapters| Model No: DVI-7216-PS
Input: 100-240VAC / 50-60Hz 0.8A; Output: 12VDC, 2.0A
Maximum Power Consumption| DVI-7365-TX: 530 mA (6.4 watts); DVI-7365-RX: 450
mA (5.4 watts)
Regulatory Approvals
Fiber Optic Extender Unit| FCC Class B, CE, RoHS
Laser| US-FDA CDRH Class 1
External AC Power Adapters| FCC, CE, UL, C-UL, BSMI, CB, CCC, LVD, LPS, PSE,
RCM, RoHS, WEEE
Warranty
Limited Warranty| 3 Years Parts and Labor
Model Numbers (1)
DVI-7365-TX| 4K HDMI Fiber Optic Transmitter, 1x LC
DVI-7365-RX| 4K HDMI Fiber Optic Receiver 1x LC
DVI-CUST-OPT| Custom Fiber Optic Cable, Plenum rated
Specify: Length, Fiber Type (MMF, SMF) and Optical Connector (LC)
Accessories Included (1)| Optional Accessories
1x External AC Power Adapter (DVI-7216-PS) with USA plug 1x User Guide 1x
3-Pin Phoenix Connector (Phoenix p.n. 1840379) 1x IR Transmitter (DVI-7360-IR-
TX) (ships with DVI-7365-TX) 1x IR Receiver (DVI-7361-IR-RX) (ships with
DVI-7365-RX) 2x Mounting Brackets with Screws| External AC Power Adapter (p.n.
DVI-7216-PS) with Euro, UK, or Australia plugs +12 VDC Power Distribution Unit
(p.n. DVI-7520-PDU) Custom Optical Cables (contact DVIGear for details)
Note 1: The Transmitter and Receiver units are sold separately. The accessories shown here are included per unit.
DVIGear, Inc. is the owner of numerous trademarks, both registered and unregistered, including without limitation, the following marks: DVIGEAR®, DISPLAYNET®, DISPLAYNET SERVER®, DISPLAYNET MANAGER®, N/AV Design®, HYPERLIGHT® and WILDCAT®. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. All other third-party trademarks used herein are the properties of their respective owners.
CUSTOMER SUPPORT
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA USA 30062
• Tel: +1.770.421.6699 • Toll Free: 888.463.9927
• Fax: +1.770.234.4207 • sales@dvigear.com •
www.dvigear.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>