Kreg Multi-Mark KMA2900 Multi Purpose Marking and Measuring Tool User Manual
- October 30, 2023
- Kreg
Table of Contents
- Kreg Multi-Mark KMA2900 Multi Purpose Marking and Measuring Tool User
- User Manual Guide d’utilisation • Manual del usuario
- Position
- Position #2
- Position #3
- More Kreg Products
- Kreg Rip-Cut™
- Kreg Adaptive Cutting System Master Kit
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Kreg Multi-Mark KMA2900 Multi Purpose Marking and Measuring Tool User
User Manual Guide d’utilisation • Manual del usuario
Congratulations on your purchase of a Kreg Multi-Mark™ multi-purpose layout
tool. For more ideas on how to use this product, please see the video on
www.kregtool.com.
To change the position of the Multi-Mark’s scale to one of the three positions
shown below, simply loosen the brass thumb screw, reposition the scale as
needed, and retighten the thumb screw.
Position
The Multi-Mark™’s first position sets the scale at a 45° angle. This is good for marking up mitered joints such as picture frames and door trim
Position #2
The Multi-Mark™’s second position sets the scale at a 90° angle. This is good for squaring your projects and making marks at a 90° angle
Position #3
The Multi-Mark™’s third position sets the scale at a 0° angle, in line with
the base.
This is good for use as a depth gauge on your table saw as well as a general
scribing tool or simply transferring measurements.