ISENVO AR180I Wireless Handheld Pet Microchip Reader User Guide
- October 30, 2023
- ISENVO
Table of Contents
Pet Microchip Reader
User Guide
Getting to know the reader.
This item is a wireless handheld microchip reader that can read ISO FDX-B
coded radio frequency identification tags. It has very simple controls and a
high-brightness OLED display which allows you to read the numbers even in
bright sunlight.
With built-in memory, it is able to store up to 30 ID tag codes, which can be
downloaded to a computer via a USB cable connection
(Note: There must be a text field for the reader to input character in
when downloading stored codes). Optimum performance delivers great animal
traceability management.
Specifications
Power| Built-in Rechargeable Battery
(Charge it for 2 hours before the first use)
---|---
Battery Life| 4 hours (Work Continuously)
Operating Frequency| 134.2KHz
Tag Compatibility| ISO FDX-B(IS011784/85)
Interface| USB 2.0
Display| OLED
Memory| 30 ID Numbers
Indicator| Audio Beeps and OLED
Read Distance| 10-15cm
(Glass Tag, vary on Chip Sizes & Types) 20-22cm
(Ear Tag, vary on Chip Sizes and Types)
Language| English
Accessory| USB Cable 1
Operating Temperature| -10°C to 55°C
Storage Temperature| -30°C to 65°C
Relative Humidity| 5% to 90% non-condensing
Package Dimensions| 21.3cm14.9cm*2.9cm
Weight| 90g
Instructions:
-
Hold down the button for 3s to power up the reader and the following sign appears on the screen.
-
Hold the reader over the chip location. If the reader fails to detect any tags, it displays No Tag on the screen.
(Note: The reader will stop reading if no tags are detected within 20s) -
If the reader detects a tag, it displays the number on the screen.
-
Press the button once to continue scanning tags.
-
To check scanned data, press the button twice while the screen shows the read sign.
-
If there are no further inputs, the scanned data will remain displayed for 5s and the reader will turn off in 60s.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>