ENCHEN X7 Electric Shaver User Manual

ENCHEN X7 Electric Shaver User Manual

Safety Instructions

Warning

1. Do not immerse the Product in water to charge, and do not charge in a humid environment.
2. Do not disassemble the body to replace the battery.
3. Do not pull and drag the USB charging cable when removing or inserting the charging plug.
4. The Product has built-in rechargeable battery, so do not put it into fire or charge, place or use it at high temperature.
5. Do not modify or repair the product by yourself.
6. As shown at the right symbol: the product can be washed under running water.

Attention

1. Before the product is connected for charging, please ensure that the USB power cable is connected to the 5V=USB power socket.
2. After each using, please put the protective cover properly to prevent damage to the shaver mesh. To avoid any injury caused to the human body, do not use the shaver if the mesh or the inner blade is damaged.
3. The blade is subject to certain service life. In order to maintain good effect, we suggest you to replace it on a regular basis.
4. Keep the Product dry, charge, use and store the shaver at the temperature ranging from 5ºC to 35ºC. Do not charge the Product in the place under direct sunlight, close to heat source, and with high humidity.
5. The product has passed IPX7 waterproof testing and can be washed under running water, and do not soak in water for a long time.
6. If the Product is not used for a long time, please charge it up at least once every six months.
7. If the shaver does not operate properly, please submit the Product to the dealer or the authorized service center for inspection.
8. Do not use salty water, hot water with temperature above 60℃, diluent, gasoline, alcohol, or other chemicals to clean the Product.
9. Please use your shaver within the range as specified in the operating instruction manual.
10. The persons (including children) who are physically impaired, mentally impaired or lack of relevant experience and knowledge shall use the Product under the supervision and guidance of their guardians.

Product description

1. Protective cover
2. Upper part
3. USB charging cable
4. Shaver blade
5. LED indicator
6. Instruction manual
7. Cover
8. Switch button
9. Rack
   

Operation

Mild skin irritation during the first few shavings is normal. It is recommended to use the shaver regularly (at least three times a week) within the period of 3 weeks, so as to make skin adaptable as quickly as possible.

Shaving

1. Press on/off button to start the electric shaver, and indicator lamp will be on.
2. Move shaver against the growth direction of the beard on the skin, and make a straight and roundabout movement.
3. It is better to shave on a dry face, so shave before or after washing your face.
   

Attention
The Improper use of the Product is possible to cause damage to the blade. Please confirm whether the blade is in good condition before use.

If shaver balde is damaged, please stop using.

Travel lock

The shaver is equipeed with travel lock function to prevent it from accidentally
starting in the luggage.

1. Open travel lock
   Long press the switch button under switch-off status, then white light of LED indicator willl twinkles three time.

2. Unlock
   Long press the switch button under locking status, and LED indicator light will be white. Then the shaver is unlocked.
   

Charging：

1. In case of power deficiency, the LED red indicator twinkles to remind you of charging.
2. When charging, the LED indicator ring twinkles like breathing and reminds that the shaver is being charged.
3. The shaver can be fully charged after 1 hour’s charging, and the white light of indicator will be on.

Cautions：

1. The shaver can work for 90 minutes when being fully charged.
2. If the shaver will not be used for a long time, please fully charge the shaver at least once every half a year.

Cleaning and maintenance

1. Before cleaning, be sure to turn off the shaver.
2. The shaver should be washed under running water (better if warm water is used).
3. Hold the blade with your fingers, open the blade assembly upward, and clean the beard collection place with a cleaning brush.

Deep cleaning：

1. Detach the shaver blade.
2. Remove the shaver rack as the knob direction of the rack.
3. Detach the blade mesh, and clean the mesh with brush.
4. After cleaning, the blade mesh and rack must be installed back in reverse sequence

Cautions:
It is recommended to replace the shaver blade every year to ensure the best shaving. Please buy the shaver blade at official authorized store.

Disassemble battery

1. Disconnect the power supply before disassembling the machine and removing the battery.
2. Remove the battery only when it runs out.
3. Do not connect the shaver to the power supply after removing the battery.

Cautions:

Do not short circuit the battery so as to avoid battery combustion resulting in fire.

Do not throw the battery into the fire so as to prevent explosion or release of toxic substances.

Troubleshooting

During operation, do not press excessively, and the skin irritation will disappear 2-3 weeks later
Indicator light doesn’t work| Not connected to pow| Connect USB cable for charging
Indicator light damaged| Return to Service Department
Circuit fault| Return to Service Department
Excessive charging time| Battery life expired| Return to Service Department
Circuit fault| Return to Service Department

Environmental protection

The built-in rechargeable battery may contain environmental pollutants. Before discarding the Product, be sure to remove the battery or send the Product to an officially designated recycling center for disposal of the battery.

You may also send the discarded Product to the recycling department as designated by the Company, and the maintenance department will decompose and recycle the battery.

Basic Parameters

Product Model: X7
Product Name: Electric Shaver
Rated Voltage: 3.7V
Rated Power: 5W
Waterproof Rate: IPX7
Charging Time: around 1h

Warranty card

The warranty is applied to the product：

1. The product is manufactured on the basis of strict quality management and inspection process.
2. If any fault occurs during normal use, the consumers are entitled to free service at the purchase shop or the maintenance center of our factory according to the warranty card. (As the consumable item, the blade does not fall within the scope of warranty, and shall be provided on a compensatory basis.)
3. The free services are not available in the following cases:
   A. The damage caused by repair and transformation not approved by the Company;
   B. The damage caused by mistake, careless use or accident;
   C. The damage caused by natural disaster and abnormal voltage;
   D. The damage caused by failure to comply with the precautions as set forth in the operating instruction to the Product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>