HYDY 20 fl oz Metallic Fir Food Jar-Wild Silicone Sleeve User Guide
- June 10, 2024
- HYDY
Table of Contents
HYDY 20 floz Metallic Fir Food Jar-Wild Silicone Sleeve
HYDY Food Jar
The HYDY Food Jar is a thermos flask designed to keep your beverages hot or cold for extended periods of time. The product features a lid that can be used as a folding spoon, making it convenient to use on the go. The body of the flask is made of stainless steel insulation, while the lid is made of PP material and the silicone cover provides a non-slip grip. The HYDY Food Jar has a capacity of 20 fl oz / 590 ml and measures 105 mm in diameter and 160 mm in height.
Product Usage Instructions
The HYDY Food Jar is suitable for storing milk, milk drinks, and fruit
juice. It is important to note that due to the perishable nature of these
beverages, long-term storage can cause biogas to build up inside the bottle.
This can lead to an increase in internal pressure, which may cause sudden
discharge of the beverage and eventually break the bottle. Therefore, it is
recommended to consume the stored beverage within a reasonable period of time.
To use the HYDY Food Jar, follow these steps:
- Remove the lid by twisting it counterclockwise.
- Pour your desired beverage into the flask.
- Twist the lid back onto the flask by turning it clockwise.
- If you need to use the folding spoon, carefully remove it from the lid and use it as needed.
- To clean the HYDY Food Jar, hand wash it with soap and water. Do not put it in the dishwasher or microwave.
Enjoy your favorite hot or cold beverage anytime, anywhere with the HYDY Food Jar!
Limited Warranty
- HYDY is committed to providing quality products. Damage and loss caused by improper use is not covered by the limited warranty. Consumers should produce invoices and proof of purchase within one year of consumption if any other defects are found. HYDY can provide the same or similar products to replace it.
- HYDY owns a design patent and corresponding trademark.
User’s Guide
- Hot water will increase pressure inside the sealed thermos bottle, and this may cause the cap difficult to open. If such happens, carefully turn on the cover to release the pressure so as to avoid injuries or burns.
- Long-term storage of drinks inside the thermos bottle is not encouraged and please consume the drinks as soon as possible.
- Do not fill in non-drinkable liquid, fuel or other flammable liquid, or corrosive, chemical substances.
- Avoid exposure of thermos bottles to intense heat or cold.
- Do not put in places where infants or young children could come in touch with to avoid injury or burns.
- Drink carefully to avoid scalding if the hot beverage is inside the thermos bottle. Due to the insulation effect brought by the vacuum, the surface of the bottle will not get hot.
- Do not pour in an excessive amount of beverage. Leave enough space inside the bottle. If the water level is too high, it will cause difficulties while opening; it may also cause overflow if you close the cap.
- When opening the cap, do not put it near your face, discharged hot air may cause burns.
- When driving, you are not recommended to consume hot drinks as sudden emergence from the traffic situation may cause burns.
- Do not add beverages when the lower cap is not removed to avoid overflow or burns.
- Do not use a microwave oven, steam oven or oven to heat.
- Do not place near radiators, heaters, or another high-temperature source to avoid bottle deformation and discoloration.
- Do not put the following beverages inside the bottle: ice, and carbonated drinks: will increase the pressure inside the bottle and make the cap not able to open; pressure can also cause sudden discharge of the beverage and eventually break the bottle. Milk, milk drinks, and fruit juice: Due to their perishable nature, long-term storage will produce biogas, so the internal pressure of the bottle will increase causing sudden discharge of beverages and eventually, breaking the bottle.
- When you replace the silicone covers, put it on the table, and scroll down the silicone cover to remove it can be removed. (For more details, please follow the instructions)
- When you need to install a new set of covers, set the cover flat on a table and hold the bottom of the bottle to load the cover vertically downward onto the bottle.
Maintenance
To keep it clean, wash it thoroughly after every use. After washing, dry it thoroughly to avoid rust.
- Before cleaning, place the bottle, cap, and silicone cover separately. Wash using diluted neutral dishwashing liquid. Wipe dry after washing thoroughly with water.
- Use the complemented soft sponge brush to clean the inside layer of the bottle, wash with diluted neutral kitchen dish detergent, rinse thoroughly, and wipe dry.
- Regular cleaning prevents odor.
- Do not use chlorine bleach, diluents, volatile oil, metal scouring pads, or abrasive scouring pads and detergent to clean it.
- Do not put it into the dryer, cutlery dryer, or boiled water for
Cleansing and disinfection
-
Do not place it in water for a prolonged time.
Note -
When adding hot water, do not allow the hot tea kettle to come in
contact with the opening. -
Avoid dropping or strong collisions.
-
Make sure to keep it dry as residual water may cause leakage.
-
Do not put in oversized ice to avoid bottle deformation or breaking.
-
Capacity: 20 fl oz / 590 ml
-
Product Sizes: 105 mm X 160 mm (diameter x height)
-
Material: Thermos body, Spoon: 18/8 (304) stainless steel
-
Lid: PP
-
Silicone Cover: Silicone
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>