Involve Audio Y4 System Brings Holy Grail Of Speakers User Guide
- June 10, 2024
- Involve Audio
Table of Contents
Involve Audio Y4 System Brings Holy Grail Of Speakers
The Involve Audio Y4 is a speaker system that provides an immersive sound experience. The following are quick setup instructions to help you quickly get your Y4 system set up and going. For more details, please read the full instruction manual.
Product Information
- Model: Y43-01W
- Serial: IAY43-01-1910-001
- Australian designed and manufactured
- Trademark and patents owned by Involve Audio Pty Ltd
- Computer programs embodied in this equipment Copyright Involve Audio 2014
The Y4 speaker system comes with:
- Y Speakers x 4
- Y4 Amplifier
- Power cord
- Line Out cord
- AUX IN cord
- Optical IN cords x2
- RCA IN cords x2
- USB Power Out x2
- Quick Start Guide
- Full Instruction Manual (not included in the box)
Usage Instructions
- Unpack the Y4 speaker system from the box.
- Assemble the Y Speakers according to the instructions in the full instruction manual.
- Position the speakers around the room according to the diagram provided in the full instruction manual.
- Connect the Y Speakers and devices to the Y4 Amplifier using the appropriate cords.
- Connect the power cord to the Y4 Amplifier and plug it into a power outlet.
- Turn on the Y4 system with the power switch on the rear of the amplifier.
- Calculate and set SweetSpot Delay Distance to suit your room according to the instructions in the full instruction manual.
- Set Sub-Woofer Mode according to your setup according to the instructions in the full instruction manual.
- Set listening mode to SST Involve for optimum sound experience according to the instructions in the full instruction manual.
- Play some music and adjust Rear Speaker and Sub-Woofer levels to your preference using the controls on the Y4 Amplifier.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR ATTEMPT TO
SERVICE THE Y4 SYSTEM. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Quick Start Guide
These are quick setup instructions and should help you quickly get your Y4 system setup and going, for more detail please read the full instruction manual.
- Unpack from box
- Assemble Y Speakers
- Position speakers around the room
- Connect Speakers and Devices to the Y4 Amplifier
- Connect Power to the Y4 Amplifier
- Turn ON the Y4 with the Power Switch on the rear fo the amplifier
- Calculate and set SweetSpot Delay Distance to suit your room
- Set Sub-Woofer Mode according to your setup
- Set listening mode to SST Involve for optimum sound experience
- Play some music and adjust Rear Speaker and Sub-Woofer levels to your preference
Overview
- 3.5mm Aux IN
- OPTICAL IN x2
- RCA IN x2
- POWER SWITCH
- RCA Line OUT
- Y Speaker – REAR LEFT
- Y Speaker – FRONT LEFT
- SUB B (Mono/Right/Rear)
- USB 5V Power Out x2
- Air Flow vents, don’t cover
- 30V POWER IN
- SUB A (Mono/Left/Front)
- Y Speaker – FRONT RIGHT
- Y Speaker – REAR RIGHT
Remote Control
Installation
Y Speaker A – FL/RR
(Front Left / Rear Right)
Y Speaker B – FR/RL
(Front Right / Rear Left)
Speaker Positioning
Connection
Setting up SweetSpot
Setting up SweetSpot™ (SST™)
Delay Distance = Far Distance – Close Distance
Delay Distance (Metres)| Delay Distance (Feet, Inches)| SST™ REAR/FRONT
Setting Value
---|---|---
0m| 0’| 0
0.4m| 1’ 4”| 0.4
0.5m| 1’ 8”| 0.5
0.6m| 2’| 0.6
0.8m| 2’ 8”| 0.8
0.9m| 3’| 0.9
1.0m| 3’ 3”| 1.0
1.2m| 3’ 11”| 1.2
1.4m| 4’ 7”| 1.4
1.6m| 5’ 3”| 1.6
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>