natec Stork Wireless Mouse User Guide
- June 10, 2024
- natec
Table of Contents
natec Stork Wireless Mouse
Product Information
The Stork mouse is a wireless mouse that comes with an Auto Power Sleep mode. This mode is activated after several seconds of inactivity, and the user can wake up the mouse by pressing any button. The mouse requires a battery for operation and has three levels of DPI settings (800, 1200, and 1600). The user can adjust the DPI setting by pressing the + scroll wheel button and the left button simultaneously for about 5 seconds. The mouse is compatible with various languages, including English, Spanish, German, Italian, Polish, Czech, Slovak, Romanian, Bulgarian, Russian, and Greek.
Product Usage Instructions
Inserting/Removing Battery
- Locate the battery compartment at the bottom of the mouse.
- Slide the battery cover to open it.
- Insert one AA battery into the compartment with the positive (+) end facing up.
- Slide the battery cover back into place until it clicks.
- To remove the battery, slide the battery cover open and remove the battery.
DPI Adjustment
To adjust the DPI setting:
- Press and hold the + scroll wheel button and the left button simultaneously for about 5 seconds.
- The mouse will switch to the next DPI level.
- The available DPI settings are 800, 1200, and 1600.
- The DPI setting can be changed repeatedly to cycle through the available settings.
Note: It is recommended to use the mouse on a clean and flat surface to avoid tracking issues. Also, using the mouse in dusty or dirty environments may affect its performance.
INSTALLATION
- Connect the USB transmitter to the USB port in your computer
- The system will install the driver automatically
- The device is ready for use
Note: The mouse is equipped with Auto Power Sleep mode, which is activated after several seconds of inactivity, press any button to wake it up.
INSERTING/REMOVING BATTERY
DPI CHANGE
- To change the DPI resolution press and hold the left button + scroll wheel at the same time for about 5 seconds. The mouse will switch to the next DPI level. Available are 3 levels of DPI settings (800 – 1200 – 1600) which can be switched in loop.
- Frequency band: 2405 MHz – 2470 Mhz
- Maximum radio-frequency power: -4.529 dBm
REQUIREMENTS
- PC or compatible device with a USB port
- Windows® 7/8/10/11, Linux, Android
SAFETY INFORMATION
- Use as intended, improper usage may break the device.
- Non-authorized repairs or disassembly voids the warranty and may damage the product.
- Dropping or hitting the device may lead to the device being damaged, scratched, or flawed in other ways.
- Do not use the product in low and high temperatures, strong magnetic fields, and damp or dusty surroundings.
GENERAL
- The safe product conforms to the EU requirements.
- The product is made in accordance with RoHS European standards.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product is not home waste. Appropriate waste management aids in avoiding consequences that are harmful to people and the environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. In order to get detailed information about recycling this product please contact your retailer or local authority.
- Hereby, IMPAKT S.A. declares that the radio equipment type NMY-2000, NMY-2001, and NMY-2002 is in compliance with Directives 2014/53/EU, 2011/65/EU, and 2015/863/EU. The full text of the EU declaration of conformity is available via the product tab at www.impakt.com.pl.
WARRANTY
- 2 years limited manufacturer warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>