Veloretti ELECTRIC Maxi Training Wheels User Manual
- June 10, 2024
- Veloretti ELECTRIC
Table of Contents
ELECTRIC Maxi Training Wheels
User Manual
Training wheels mounting
Manual Training wheels mounting
Version 1.1.
Year 2023
Veloretti BV
Tools/products needed:
- Wrench 15
Riding a bike is a cool challenge for your kid, training wheels can help! If
you have the right feeling and you can keep your balance you can remove the
training wheels.
Steps
- Open the rear axle bolt with wrench 15 and take the ring and nut off
- Put the parts over it in this order: Spacer, training wheels, ring and the nut
- The wheels should be mounted a bit above the ground to only give support once your little one loses balance.
- Tighten the bolt with wrench 15 (20 Nm)
Tip: Make sure the wheel is fully aligned with the frame and the chain is at the right tension.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>