sofabaton U2 Bluetooth Remote User Manual
- June 10, 2024
- sofabaton
Table of Contents
sofabaton U2 Bluetooth Remote
Product Information
The product is the Bluetooth Remote Controller Model U2. It is a remote control that can be used to control various devices through Bluetooth or infrared (IR) signals. The device complies with part 15 of the FCC Rules and has been tested and found to comply with the limits for a Class B digital device. The device can be used in portable exposure condition without restriction.
Product Usage Instructions
Load Batteries
Open the battery compartment located at the back of the remote controller. Insert two AAA batteries into the compartment, making sure to align the positive and negative ends of the batteries correctly. Close the battery compartment.
Add a Device
IR Matching Mode:
- Point the U2 remote control at your device.
- Click the first button on the U2 remote control and choose Yes or No to see if it works.
IR Learning Mode:
- Keep the U2 remote control line-of-sight with your original remote.
- Select the Icon of the function key that needs to be copied on the App.
- Long press the corresponding function key of the original remote.
- If the App notifies you it’s successful, then it is completed. If not, please try again.
Bluetooth Mode:
- Press and hold the button of the original remote that corresponds to the device you want to add.
- Back to Bluetooth devices and select the device you want to add.
- If the device is successfully connected, scroll to the desired device and start using.
Reassign Remote Key
To reassign remote keys, select the key you want to reassign and follow the instructions on the App.
Create Macro for This Key
To create a macro for a key, select the key and follow the instructions on the App.
Clear This Key
To clear a key, select the key and follow the instructions on the App.
Connect Remote
- Search SofaBaton on App Store or Google Play and download the app.
- Connect your U2 remote control to your phone via Bluetooth.
- Follow the instructions on the App to add a new device or reassign remote keys.
If you have any questions or complaints, please contact our friendly customer service team.
Download “SofaBaton” App
Via IR Learning Mode
Keep U2 Line-of-Sight with your original remote, select the Icon of the
function key that needs to be copied. Meanwhile, long press the corresponding
function key of the original remote. If the App notifies you it’s successful,
means completed. If not, please try again
Via IR Matching Mode
Keep U2 Line-of-Sight with your device, clicks the firstly and then choose Yes
or No to see if it works. During the process, the U2 remote control will emit
infrared signals to the device. And U2 will be able to find proper code set
after searching database.
Via Bluetooth Mode
If you add a new Bluetooth Device, the App would be disconnected from your
U2 first. Meanwhile, you can connect your U2 with your phone to complete the
remaining steps of adding a new device
Upon adding new devices
Reassign Remote Keys Configurate Macro Keys
Start Using
Scroll to the desired device and start using.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution:
RSS-Gen Issue 5 “&” RSS-Gen numéro 5 This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment
Advice and Complaints
SofaBaton@outlook.com
Our fr iendly customer service team wi ll work hard to put a smi le back on your face.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>