perixx PERIMICE-520 Wired Ergonomic Trackball Mouse User Manual
- June 10, 2024
- Perixx
Table of Contents
PERIMICE-520 Wired Ergonomic Trackball Mouse User Manual
Product Illustration
Trackball Cleaning Instructions
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Caution
-
The manufacturer and re-resellers are not responsible for any technical malfunctions, damage, or personal injury incurred by:
► Any attempt to dismantle, change or modify the product in any manner
► Malfunction or damage is due to misuse or improper alteration or repair.
► Malfunction or damage caused by external influence such as falling
► Malfunction or damage is caused by fire, salt, gas, earthquake, lightning, wind, water, or other natural calamities, or abnormal voltage.
► Malfunction or damage is caused by other devices connected to the products.
► Malfunction or damage is caused by high temperature, humid, greasy, dusty, and hazardous environment. -
You are cautioned that changes or modifications not expressly approved by Perixx Computer GmbH could void your authority to operate the equipment.
-
All brand names, trademarks, and logos are the properties of their respective owners.
Please Note: Long-term repetitive use of any keyboard and mouse could cause injury to the user. Perixx recommends users avoid excessive use of this or any keyboard and mouse.
Important Safety Instructions:
- Avoid dropping.
- Do not disassemble.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40 degree
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product. Perixx offers a one-year limited warranty with an optional one-year extension.
Specification
Interface | USB Type-A | DPI | 400(L)/1600(H) |
---|---|---|---|
Size | 13910250mm | Acceleration | 106 |
Weight | 134±10g | Tracking speed | 301135 |
Cable length | 1800mm | Report rate | 125Hz |
Material | ABS | Durability | 3 million keypresses |
Operating system | Win 7 or later | Operating Temperature | 0°C-40°C |
requirements | Storage Temperature | -20°C-60°C | |
Number of buttons | 7 |
PERIMICE-520 Software Setting
Please download and install the PERIMICE-520 driver from our website. (
https://eu.perixx.com/pages/download-driver ) After the installation,
you can start the setting by clicking the icon.
All buttons on PERIMICE-520 are programmable with the following functions: Click, Assign Macro, Multimedia, Windows, Menu, Wheel click…etc. The following pages will introduce how you can set up Macro, Multimedia, Windows and Basic commands function.
Macro Manager
You can create a new Macro setting by pressing the “+” button. Then you can
enter the Macro name in A and press ENTER key on the keyboard to save.
Start to record the Key Press Sequence by clicking “REC” button and stop the
recording by pressing the button again.
After the selection, please press SAVE to save the setting or CANCEL to
discard the setting and leave from the program.
Once the Macro is recorded, you can simply press “-” to abandon the setting.
The Multimedia, Windows and Basic commands sub menus can provide more options
in multimedia and office settings.
Multimedia sub menu
Windows sub menu
Basic commands sub menu
Documents / Resources
|
perixx PERIMICE-520 Wired Ergonomic Trackball
Mouse
[pdf] User Manual
PM-520, PERIMICE-520 Wired Ergonomic Trackball Mouse, PERIMICE-520, Wired
Ergonomic Trackball Mouse, Ergonomic Trackball Mouse, Trackball Mouse, Mouse
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>