MOXA ioLogik E1200 Series Universal Controllers Instructions

MOXA ioLogik E1200 Series Universal Controllers

Product Information

The ioLogik E1200 Series firmware is a software update for the ioLogik E1210 and E1210-T products. The firmware is available in various versions, starting from v1.8 to the latest version v3.3. Each version has its build and release date.

Supported Operating Systems

The firmware does not require any specific operating system to function.

Enhancements

Some firmware versions include enhancements, but the release notes do not specify what these enhancements are.

Changes

Some firmware versions include changes, but the release notes do not specify what these changes are.

Bugs Fixed

The release notes do not specify any bugs that were fixed in any of the firmware versions.

Product Usage Instructions

To update the firmware on your ioLogik E1210 or E1210-T product, follow these steps:

1. Visit the manufacturer’s website and download the latest firmware version for your product.
2. Extract the downloaded firmware file on your computer.
3. Connect your ioLogik E1210 or E1210-T to your computer using an Ethernet cable.
4. Open a web browser and enter the IP address of your ioLogik E1210 or E1210-T in the address bar.
5. Enter your login credentials to access the device configuration page.
6. Navigate to the firmware update section and upload the extracted firmware file.
7. Wait for the firmware update to complete, and then restart your device.

Note: It is important to follow the manufacturer’s instructions carefully when updating the firmware on your device. Any mistakes during the process can result in permanent damage to your device.

Release Date: Aug 03, 2022

Applicable Products

• ioLogik E1210, ioLogik E1210-T

Supported Operating Systems

• N/A

New Features

• Adds the default password “moxa”.
• Adds a Password and Login Policy.
• Adds the Notification Message function.

Enhancements

• Adds the DHCP Option 12 “Server Name”.

Bugs Fixed

• Ethernet/IP cannot establish a second input-only session.

Changes

• N/A

Notes

• N/A

Release Date: Dec 25, 2020

Applicable Products

• ioLogik E1210, ioLogik E1210-T

Supported Operating Systems

• N/A

New Features

• Safe Mode supports Ethernet/IP protocol.

Enhancements

• N/A

Bugs Fixed

• DHCP mode will not get the Gateway IP.
• The counter value is reset after a power failure when booting up.
• The serial number is displayed incorrectly on the web console.
• Ethernet/IP implicit messages are sent to port 2222 by default. Changes N/A Notes N/A

Release Date: Nov 25, 2019

Applicable Products

• ioLogik E1210, ioLogik E1210-T Supported Operating Systems N/A

New Features

• EtherNet/IP registration on Moxa’s licensing website is no longer required.
• Added case-insensitive content length for RESTful API.

Enhancements

• N/A

Bugs Fixed

• Fixed inaccurate counter value when using Modbus to start a pulse (E1210/E1212/E1213).
• Fixed opposite on/off pulse width display on web console (E1211/E1212/E1214).
• Fixed that the offset scaling value will reset after changing the Alias name (E1260).
• Fixed self-rebooting when entering the URL in the browser for the configuration file.
• Fixed EDS file import connection error.
• Fixed failure when using save counter on power failure and reset counter at the same time (E1210/E1212/E1213).
• Fixed inaccurate counter value when using high frequency (E1210/E1212/E1213).
• Fixed that the trap community name is not included in the export file.
• Fixed that EtherNet/IP cannot use the “Set Attribute Single” service.
• Added an enable RESTful API setting in the configuration file.

Changes

N/A Notes N/A

Release Date: Jan 16, 2018

Applicable Products

• ioLogik E1210-T, ioLogik E1210 Supported Operating Systems N/A

New Features

• Added OPTIONS method for RESTful API.
• Added quick access URI for RESTful API.

Enhancements

• Added SNMP Trap Community Setting to the web console.
• Added a note on the password settings page that passwords are limited to 16 characters. Bugs Fixed
• Fixed DHCP lease time did not ask for an extension when half of the lease time elapsed.
• Closed IP forwarding function (Port 0).
• Closed UDP Port 161 when SNMP agent is disabled.
• Fixed RESTful API header case-sensitive issue.
• Fixed an invalid token issue on the login page when using Firefox.

Changes

• N/A

Notes

• This version of the firmware only works with ioSearch v2.0 or later versions.
• To prevent system failure, only update the next or the previously released firmware version to prevent system failure.

Release Date: N/A

Applicable Products

• ioLogik E1210, ioLogik E1210-T Supported Operating Systems N/A

New Features

• Added the EtherNet/IP protocol.
• Added RESTful API.
• Added new registers for the Modbus/TCP protocol.
• Added new OIDs for the SNMP protocol.
• Modbus, EtherNet/IP, and RESTful services can be disabled (enabled by default).
• Added sending heartbeat to port 9500 of MX-AOPC UA Server after the heartbeat function is enabled.
• Increased password length from 8 to 16 characters.
• Added a function to check special characters to prevent Cross-Site Scripting.
• Passwords are now sent using the POST method instead of the GET method.

Enhancements

• N/A

Bugs Fixed

• Fixed file transfer problems when using the Chrome browser (e.g., firmware update, configuration import or export).

Changes

• N/A

Notes

• N/A

Release Date: N/A

Applicable Products

• ioLogik E1210, ioLogik E1210-T Supported Operating Systems N/A

New Features

• Improved protocol efficiency for the ioLogik 2500 Series. Enhancements
• N/A Bugs Fixed N/A Changes N/A Notes N/A

Release Date: N/A

Applicable Products
ioLogik E1210, ioLogik E1210-T Supported Operating Systems N/A
New Features

• Supports ioLogik 2500 expansion mode.
• Supports setting an initial value for a counter.

Enhancements

• N/A

Bugs Fixed

• Unable to disable the P2P heartbeat interval.
• When the P2P client heartbeat is larger than 256 the time interval is incorrect. Changes
• N/A

Notes

• N/A

Release Date: N/A

Applicable Products
ioLogik E1210-T, ioLogik E1210 Supported Operating Systems N/A
New Features

• Supports SNMP protocol.
• Added P2P heartbeat function.

Enhancements

• N/A

Bugs Fixed

• The counter storage is deleted when the power fails.
Changes

• N/A

Notes

• This version of the firmware only works with ioSearch v1.5 or later versions.
• Use the web console when upgrading the firmware from v1.0 to v1.10.

Release Date: N/A

Applicable Products

ioLogik E1210, ioLogik E1210-T Supported Operating Systems N/A
New Features

• N/A

Enhancements

Ensured that the system works properly after unstable power conditions. Bugs Fixed

• N/A

Changes

• N/A

Notes

• N/A

Release Date: N/A

Applicable Products
ioLogik E1210, ioLogik E1210-T Supported Operating Systems N/A
New Features

• Added “Locating I/O” function in General Settings.
• Added Modbus address function code=0x08 for the “ECHO” function.
• Counter overflow status displayed in Channel Settings can be cleared manually. Enhancements
• Improved firmware upgrading speed.
• Removed Modbus/TCP ID checking mechanism.

Bugs Fixed

• N/A

Changes

• N/A

Notes

• This version of the firmware only works with ioSearch v1.5 or later versions.
• Use the web console when upgrading the firmware from v1.0 to v1.9.

Firmware for ioLogik E1200 Series (ioLogik E1210/E1210-T) Release Notes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>