SGC Lighting Animal Behavior Printable Code Mat Instructions
- June 10, 2024
- SGC Lighting
Table of Contents
SGC Lighting Animal Behavior Printable Code Mat
Product Information: BOLT Animal Behavior Code Mat
The BOLT Animal Behavior Code Mat is a printable mat designed to be used with the BOLT robot. The mat is printed on 60 pages of 8.5×11 paper and assembled using the instructions provided. The mat consists of a blank grid with coordinates A-T and 1-10.
Product Usage Instructions: Assembling the Code Mat
- Print all 60 pages of the PDF. In the print dialogue box, select Scale: 100% to ensure the Code Mat is printed at the correct size. The Code Mat can also be printed in Grayscale / Black and White.
- Cut along the solid scissor lines on the top and right sides of each page.
- Line up the cut edges on the top and right side of the page with the dashed lines on the sheets above and to the right. Pages will overlap on top of each other. Line up the cut edge on the right side with the vertical dashed line on the page to the right. Line up the cut edge on the top with the horizontal dashed line on the page above it.
- Tape pages together on the bottom of the Code Mat or glue on the adhesive area so the robot has a smooth surface to roll on.
- Repeat steps for each page until the Code Mat is assembled.
- Assemble pages in chronological order from left to right.
Once assembled, place the Code Mat on a flat surface and use it with your BOLT robot according to its manual or instructions.
ADHESIVE/ OVERLAP AREA
This 60 page document will be used to assemble your Code Mat. Print out each page on 8.5×11” paper and tape or paste them together using the instructions.
-
Print all 60 pages of the PDF. In the print dialogue box, select “Scale: 100%”. This will ensure the Code Mat is printed at the correct size.
The Code Mat can also be printed in Grayscale / Black and White.
-
Cut along the solid scissor lines on the top and right sides of each page.
-
Line up the cut edges on the top and right side of the page with the dashed lines on the sheets above and to the right. Pages will overlap on top of eachother.
- Line up the cut edge on the right side with the ver˜ical dashed line on the page to the right.
- Line up the cut edge on the top with the horizontal dashed line on the page above it.
-
Tape pages together on the bottom of the Code Mat or glue on the adhesive area so the robot has a smooth sur°ace to roll on.
-
Repeat steps for each page until the Code Mat is assembled.
Assemble pages in chronological order from left to right.
Your Code Mat will look like a blank grid with coordinates A-T and
1-10.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>