KURO CSP-102 Bluetooth Speakerphone User Guide

CSP-102 Bluetooth Speakerphone

Product Information

The product is a electronic device that requires proper handling and care for optimal usage. It should not be disassembled and should be kept away from high heat sources such as direct sunlight, fire, microwave, or similar sources. The device should not be exposed to dripping or splashing water. It should only be cleaned with a dry, soft lint-free cloth and corrosive cleaners or oils should not be used. Original or certified cables should be used to ensure proper functionality. Dropping the device from heights should be avoided.

Product Usage Instructions

1. Handle the device with care and do not disassemble it.
2. Keep the device away from high heat sources such as direct sunlight, fire, microwave, or similar sources.
3. Avoid exposing the device to dripping or splashing water.
4. Clean the device with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
5. Use only original or certified cables to ensure proper functionality.
6. Avoid dropping the device from heights.

Safety and Notice

Safety:

• Do not disassemble.
• Do not place near any high heat as direct sun light, fire, microwave and or the like.
• Do not expose the device to dripping or splashing water
• Clean with a dry, soft lint-free cloth, do not use any corrosive cleaner or oil.
• Use original or certified cables.
• Avoid dropping from heights.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

The device has been evaluated to meet general RF exposure requirement.

• Bluetooth: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by C-Media Electronics Inc. is under license.
• Xear™, CMedia word mark and logos are registered trademarks owned by C- Media Electronics, lnc.4-1
• Other trademarks and trade names are those of their respective owners.

Safety:

• Do not disassemble.
• Do not place near any high heat as direct sun light, fire, microwave and or the like.
• Do not expose the device to dripping or splashing water.
• Clean with a dry, soft lint- free cloth, do not use any corrosive cleaner or oil.
• Use original or certified cables.
• Avoid dropping from heights.
• CSP-102 Bluetooth Speakerphone Quick Start Guide
• Kuro CSP-102 Bluetooth Speakerphone
• Kuro Logo+ Website: www.kuro.com.twfol
•  Logo: Bluetooth/CE/FCC/NCC/BSM
• Kuro QR Code
• English

How to Use:

1. Power On/Off
2. Volume Up
3. Volume Down
4. Mute Button
5. Mode Switch
6. Answer/Hand Up

• (F1) Bluetooth Button

• (F2)USB Type-C Connect
  USB Type-C

• (F3) 3.5mm Audio Jack & 3.5mm

(BK say:  H & B)

1. Long press to power on/off.

2. Mute/unmute in conference mode &(3)&{4) Turn up/down volume.

3. Music/Conference Mode Switch.

4. Tap to answer/hang up call. (Smartphone Bluetooth connected)
   Long-press to activate smartphone’s voice assistant. (Music Mode) Play/Pause.

   • (F1) Press to enter the pairing mode, long-press to enable/disable Bluetooth.
   • (F2) Battery charge and USB Audio Connection.
   • (F3) Extend CSP-102 as Audio-Output & Microphone-In for Smartphone or PC.

Note: Please charge before you use.

How to Connect:

1. Bluetooth Wireless Connection
2. USB Wired Connection
3. 3.5mm CSP-102

Package Contents:

1. CSP-102 Device & CSP-102
2. Quick Start Guide
3. USB Type-A to Type-C Cable & USB Type-A, Type-C
4. 3.5mm CTIA Audio Cable & 3.5mm CTIA

(BK say: … )

Use Scenario:

1. Meeting Room
2. Portable

Product Specification

• Product Name: Kuro Bluetooth Speaker phone
• Model: CSP-102f-l
• Microphone: Omni-directional -35 ± 2dBVE
• Speaker Output: 1.8″ 6W Full Range
• USB Connector Type: USB Type-CE
• Charge Input: 5V/1.2A (Max)
• Audio Cable: 3.5mm CTIA Type
• Bluetooth Version: Bluetooth 5.0, 10M
• Bluetooth Protocol: A2DP, HFP/HSP, AVRCPE
• Battery: 18650 Li-Ion 3. 7V 5,200mAh
• Usage Time: (Music Mode) 10 Hours/ (Conference Mode) 20 Hour

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>