Hasbro MARVEL STUDIOS Loki Instructions

: June 10, 2024
: Hasbro

Table of Contents

Hasbro MARVEL STUDIOS Loki
Product Information
Product Usage Instructions
TIP
HOW TO USE
TO INSTALL BATTERIES
FCC STATEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hasbro MARVEL STUDIOS Loki

Hasbro-MARVEL-STUDIOS-Loki-PRODUCT

Product Information

The product is a Tesseract cube that produces light effects.
It can produce continuous light effects for 5 minutes.
To activate the continuous light effect, press and hold the button for 3 seconds.
To turn off the light effect, press the button again.
The product requires batteries to function.

Product Usage Instructions

To install batteries:

Remove the lid of the Tesseract cube.
Remove the outer casing of the cube.
Locate the groove in the cube and disconnect the two sides.
Remove the inner battery pack.
Insert batteries into the battery pack.
Reassemble the Tesseract cube by following steps 1-4 in reverse order.

To use the light effects:

Press the button to activate continuous light effects for 5 minutes.
To activate a permanent light effect, press and hold the button for 3 seconds.
To turn off the light effect, press the button again.

TIP

For 5 minutes of continuous light effects, press the button. For continued light effect, press the button and hold for 3 seconds. Press the button again for OFF.

HOW TO USE

Hasbro-MARVEL-STUDIOS-Loki-FIG-2

TO INSTALL BATTERIES

Remove lid.
Remove the outer casing.
Locate the groove in the cube, then disconnect the two sides.
Remove inner battery pack.
Insert batteries.
Reassemble Tesseract following steps 1-4 in reverse.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAN ICES-3 (B)/NMB-3(B) Refer to battery caution information on a separate sheet. Retain this information for future reference.