Ivation IVAFTSPA Foot Spa Massager User Guide
- June 10, 2024
- Ivation
Table of Contents
Ivation IVAFTSPA Foot Spa Massager
INTRODUCTION
Thank you for purchasing the Ivation Foot Spa Multifunction Heated Massager. This User Guide is intended to provide you with guidelines to ensure that the operation of this product is safe and does not pose a risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
Heat, Massage, and Aromatherapy
The Ivation Foot Spa Multifunction Heated Massager delivers a vibration massage to relieve sore or tired feet. Water jets create thousands of bubbles to soothe your feet and enhance circulation. Rub your soles against the raised nodes on the bottom of the basin for an acupressure-type massage. Activate the massaging rollers for an invigorating massage to your soles.
You can use the massager with or without heat. The maximum water temperature is a comfortable 122° F.
This massager includes 3 pedicure attachments that can be inserted into the round receptacle located in the middle top part of the basin.
- Brush attachment: Brush your skin and toenails.
- Pumice stone attachment: Use to exfoliate dry skin.
- Acupressure attachment: Rub the soles of your feet against the nodes for a more targeted massage.
Enhance your massage experience… Add essential oil to the water for aromatherapy, or soothing salts to relieve soreness.
Box Contents
- Multifunction heated foot massager
- Pumice stone pedicure attachment
- Acupressure attachment
- Brush attachment
- User guide
Safety Precautions
WARNING! Keep children away from buckets, with even small amounts of liquids. Children can fall into a bucket and drown.
- Do not turn on the appliance before the basin is filled with water. Do not overfill the basin.
- Note the minimum and maximum water level marks on the inside of the basin. The water level should fall between these two marks.
- Do not turn on the heat feature until the basin is filled with water. Damage to the heating element could occur.
- Take care not to spill water onto the LED display or control panel.
- Never use this appliance as a substitute for medical attention or treatment.
- Consult your physician if you have any questions regarding the use of this product.
- Do not use this product to treat any unexplained pain before consulting your physician.
- Stop using the product if pain increases or swelling occurs after application.
- Do not use it on any part of the body that is anesthetized.
- Do not use it on any part of the body where the surgery was performed recently.
- Always unplug the product from the electrical outlet immediately after use and before cleaning.
- Use this appliance only for its intended purpose.
- Do not submerge the unit in water or other liquid.
- Place the unit on a level, stable floor.
- The appliance should never be left unattended when plugged in. Unplug it from the outlet when not in use.
- Do not let children use or play with this appliance.
- Do not use any attachments not supplied or recommended by the manufacturer.
- Never operate the appliance if it has a damaged cord or plugs if it is not working properly, if it has been dropped or damaged, or submerged in water or other liquids.
- Do not place the appliance near open flames or heat sources. Fire, electric shock, or injury might occur.
- Keep the power cord away from heat.
- Disconnect the power cord by holding the plug attached to the cord. Do not pull the cord itself.
- Use caution when using this appliance if you have sensitive skin or poor circulation.
- Never use it while sleeping or drowsy.
- For optimal hygiene, always use fresh, clean water.
Control Panel Functions
- Power button: Press to start. The “Power” indicator light will turn on. Press the button again to turn it off.
- Temp-up arrow: Each press increases the temperature by one degree. The maximum temperature is 122° F. Temp down arrow: Each press decreases the temperature by one degree. The lowest temperature will be 95° F.
- Bubble button: Press once to turn on the bubble massage. The “Bubble” indicator light will turn on. Press again to turn on the infrared light. Press again to turn it off.
- Massage button: Press to start the massage rollers. Press again to stop.
- Timer button: Press once and the display indicates the remaining operating time. Press again to adjust the time. Press again to turn it off. This machine features an intelligent start function. When turned on, it will automatically start to heat the water. When the temperature reaches 95° F, the bubble function will automatically start. When the temperature reaches 108° F, the massage function will automatically start.
To Use
- Place the basin on the floor and plug the electrical cord into an AC outlet.
- Add water, noting the minimum and maximum water level marks on the inside of the basin. The water level should fall between these two marks. Do not overfill the basin.
- Press the Power button.
- Immerse your feet in the water.
- To heat the water, press the “up” arrow button. The LCD will display the temperature settings. Press the button until you reach the desired setting. The maximum water temperature is 122° F. To lower the temperature setting, press the “down” arrow button.
- Press the Bubble button for an infrared bubble massage.
- Press the Massage button to start the massage rollers.
- To set the timer, press the Time button and adjust the time by pressing the “up” or “down” arrow buttons. Maximum operating time is 60 minutes.
- To turn it off, press the Power button. Disconnect the electrical cord from the outlet. Pour out the water.
Cleaning and Storage
- Wipe the exterior unit with a soft damp cloth. Do not use harsh detergents.
- Clean the basin with water and mild detergent after each use.
- Make sure the appliance is clean and dry before storing it. Store in a clean, dry, and cool place.
Specifications
- Power rating: 230V, 50Hz
- Power output: 450W
- Dimensions: 16.5″ x 14.9″ x 9.2″ (41.8 x 37.8 x 23.5cm)
- Weight: 6.7 lbs. (3.05kg)
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
Customer Service
Distributed by C&A Marketing, Inc. 114 Tived Lane East Edison, NJ 08837 USA
C&A Marketing UK LTD 167 Hermitage Road Crusader Industrial Estate London N4 1LZ, UK
info@myivation.com Made in China Ivation is a trademark of C&A IP Holdings, LLC ©2016 All rights reserved
FREQUENTLY ASKED QUESTIONS
What is the maximum water temperature for the Ivation Foot Spa Multifunction Heated Massager?
The maximum water temperature is 122° F.
Can I use the massager without heat?
Yes, you can use the massager with or without heat.
What are the pedicure attachments that come with the massager?
The pedicure attachments include a brush attachment, pumice stone attachment, and acupressure attachment.
Can I add essential oils to the water for aromatherapy?
Yes, you can add essential oils to the water for aromatherapy.
Is the Ivation Foot Spa Multifunction Heated Massager safe for children to use?
No, children should not use or play with this appliance. Keep it away from them.
How do I adjust the water temperature?
Press the “up” arrow button to increase the temperature and the “down” arrow button to decrease it.
How do I turn on the bubble massage?
Press the Bubble button once to turn on the bubble massage. Press again to turn on the infrared light. Press again to turn it off.
How do I start the massage rollers?
Press the Massage button to start the massage rollers. Press again to stop.
What is the maximum operating time for the massager?
The maximum operating time is 60 minutes.
How do I clean and store the massager?
Wipe the exterior unit with a soft damp cloth. Clean the basin with water and mild detergent after each use. Make sure the appliance is clean and dry before storing it. Store in a clean, dry, and cool place.
How does the Ivation IVAFTSPA Foot Spa Massager work?
The Ivation IVAFTSPA Foot Spa Massager is a device that uses water and heat to provide a relaxing foot massage. It has built-in water jets and massage rollers that help relieve tension and improve blood circulation in your feet.
How do I use the foot spa massager?
Fill the foot spa with warm water to your desired level. Plug in the device and turn it on. Adjust the temperature and select the desired massage settings using the control panel. Then, place your feet in the footbath and enjoy the massage.
Can I add essential oils or salts to the water in the foot spa?
Yes, you can add essential oils or salts to enhance your foot spa experience. However, make sure to follow the instructions provided by the manufacturer regarding the use of additional substances in the water.
Does the foot spa have a heating function?
Yes, the Ivation IVAFTSPA Foot Spa Massager has a heating function. It can heat the water to help maintain a comfortable temperature throughout your foot spa session.
What are the massage settings available on the foot spa massager?
The foot spa massager typically offers different massage settings, such as vibration, bubble massage, water jets, and built-in massage rollers. You can choose the settings that provide the most relaxation and relief for your feet.
DOWNLOAD THE PDF LINK:Ivation IVAFTSPA Foot Spa Massager User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>