Spy Cameras GF-Q200 Smart Wireless Charger User Manual
- June 10, 2024
- Spy Cameras
Table of Contents
Spy Cameras GF-Q200 Smart Wireless Charger User Manual
Packing List
Open the package, then make sure the Wireless Charger Cam (device) is intact, and with all the below accessories.
-
1 x Wireless Charger Cam
-
1 x Quick Installation Guide
-
1 x Adapter
Product Diagram
| Description | Introduction |
|---|---|
| Light Sensor | Infrared light adjustment |
| Wireless charging | Wireless charging sensing area |
| Micro SD Card Slot | Sup G Micro-SD card storage(up |
| Infrared LED | Additional light in Low-light conditions |
| Lens | Capture Videos |
| RESET | Press and hold [RESET] for 5 seconds, the device will be restored to |
factory default setting
Power Cable| Supply power(5V 2A)
Indicator light
Blue LED indicator| Light off: No power Light solid: Power on Light blink:
System running normally
---|---
Red LED indicator| Light off: Wi-Fi no connection Light solid: Wi-Fi connected
Light blink: Waiting connect to Wi-Fi
Use wireless charging function
- Please charge with the original adapter, then put the phone on the device.
- Please remove the smartphone from the device when it’s fully charged
WARNING
- Only original 5V 2A adapter is allowed.
- Only support the mobile phones which support wireless charging.
- Distance between the router and the device should be within 3 meters during configuration.
- Do not place the objects such as metal, magnets or magnetic stripe cards between the smartphone and the device’s charge sensing area. The smartphone may not charge properly or be damaged due to overheating
- If your phone with a thick protective case, wireless charging may not work. Please remove the protective case If it is thick, and then put the phone on the device for charing.
Wireless charging support smart phone model
This Smart Wireless Charger supports Samsung Galaxy Note 8, SB, SB Plus, S7, S7 Edge, S6 Edge Plus, Note 5 fast charging. Standard wireless charging for iPhone X,8 PIus,8 and most qi-enabled devices like LG G6, 56,56 Edge, and most models of MOTO,HTC and Nokia, etc.
If your phone not support wireless charging, can be use with wireless charging receivers.
Preparation
Please prepare the below stuff before you use it.
One smartphone or tablet PC(Mac or Windows PC is not acceptable) with IOS 6.0
or Android 4.0 system(higher version system is acceptable).
Wi-Fi Router
- Device can only connect to 2.4Ghz Wi-Fi router.
- Make sure turn on the DHCP of router, and MAC address should be off.
- Distance between the router and the device should be within 3 mtrs during configuration.
- Please don’t use special character such as Chinese, symbol to name the WiFi.
- Please don’t use special character such as Chinese, symbol as the password for the WiFi and Wi-Fi password can not be
Install “Clock Live” App
- Search “Clock Live” App from Apple Store or Google Play, then download.
- Scan the QR Code below and install the App.
iOS APP
apps.apple.com/us/app/clock-live/id1089842733
Android APP
play.google.com/store/apps/details?id=com.yadavapp.clocklivewallpaper&hl=en_US
Operation Instruction ( please read, IMPORTANT!)
-
Open the back cover
-
Plug in.
-
Plug in and wait about 40 seconds, the device starts and the blue LED indicator will blink.
Configure Device
Open the App.
-
Click “+”
-
Click “First Add”
**** Make sure your smart phone is connected to WiFi router before the configuration.
-
When the red LED indicator is b|inking, please click Next.
Notice
- If the red LED indicator does not blink, press RESET button and hold 5 seconds, until the blue LED indicator is solid, release the button and the device is reset to factory default setting.
WARNING
- In order to make sure the device work normally, please don’t use any non -matched adapter.(standard output DC SV 2A )
- After the device started, if the red LED indicator does not blink, please reset the device to factory default setting.
- Press [RESET] button and hold 5 seconds, when the blue LED indicator is solid, release the button, then the device is reset to factory default setting.
About the User Manual:
The user manual is used as a guide.
The photos, graphic, charts and illustrations provided in the user Manual are only used to explanation and interpretation, which may be different from specific products, please refer to the real object.
The user manual maybe updated because of the products version upgrade or other requirements, if you need the latest version of the user manual, please contact customer service for the latest version of the user manual.
Scan the QR code on the back housing.
Name the device.
Input the correct password of the Wi-Fl.
WARNING
Don’t use the Chinese or special symbol to name the WiFi. Don’t use the
Chinese or special symbol as the password of WiFi.
Please put your smart phone or tablet PC close to the device within 10cm, then press to configure.
Turn the volume of smart -phone or tablet PC to maximum.
Wait for about 60 seconds, the configuration will be done. (After the
configuration is sucessful. the LED indicator is solid.)
If configuration failed
- Please make sure input right password(check the capital&small Ietter,bIank)
- Please keep the distance between the device and the WiFi router within 3m.
- Press and hold [RESET] for 5 seconds, the device is restored to factory default setting . repeat the configuration again.
My Cameras
Click the screen to watch the video.
Watch Video
If the live video is freezed, please close it and open again. If it is still freezed, please power off and restart the device and the WiFi router, and keep the device and the WiFi router within 3m to configure again.
Frequently Ask Question
Open the App, then Click .
Click “FAQ” enter FAQ page.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>