HPE ProLiant DL385 Gen10 Plus v2 Server User Guide
- June 10, 2024
- HPE
Table of Contents
HPE ProLiant DL385 Gen10 Plus v2 Server
QuickSpecs
Overview
HPE ProLiant DL385 Gen10 Plus v2 server
HPE ProLiant DL385 Gen10 Plus v2 server
The HPE ProLiant DL385 Gen10 Plus v2 Server is redefining price/performance
with the new math for virtualized compute. Powered by the latest AMD® EPYC®
7003 Series Processors , the HPE ProLiant DL385 Gen10 Plus v2 Server offers
greater processing power, memory speeds up to 3200 MT/s. and data transfer
rates with PCIe Gen4 capabilities.
This 2P, 2U server has been designed with flexibility while delivering a high
core count and large memory footprint. Choose this purpose-built platform for
virtualization, High Performance Compute and memory centric workloads.
HPE ProLiant DL385 Gen10 Plus v2 8 SFF Server- Front View
1. Quick removal access panel
7. USB 3.1 Gen1
2. Power On/Standby button and system power LED button
8. Serial label pull tag
3. Health LED
9. Drive Bay 3. 8 SFF SAS/SATA shown (Box 3) 1
4. NIC Status
10. Drive Bay 2. Blank shown (Box 2) 2
5. Unit ID button
11. Drive Bay 1. Blank shown (Box 1) 3
6. iLO front service port
Notes: – 18 SFF U.2/U.3 optional – 28 SFF SAS/SATA or 8 SFF U.2/U.3 optional – 38 SFF SAS/SATA or 8 SFF U.2/U.3 or Universal Media Bay optional
Page 1
QuickSpecs
Overview
HPE ProLiant DL385 Gen10 Plus v2 server
HPE ProLiant DL385 Gen10 Plus v2 Server – Rear View
1. Primary Riser. PCIe Slots1
HPE Flexible Slot power supply bay 2
2. Optional Secondary Riser. PCIe Slots2
VGA connector
3. Tertiary Riser. PCIe Slots3
10. OCP 3.0 Slot
4. Optional serial port (not shown)
11. Unit ID LED
5. Power supply power LED
12. USB connectors 3.1 Gen1 (2)
6. Power supply power connection
13. Dedicated iLO management port
7. HPE Flexible Slot Power Supply bay 1
Notes:
– 1 Slots 1-3 top to bottom, riser shipped standard, not shown.
– 2 Slots 4-6 top to bottom, not shown, requires second riser card, and second processor. Optional 2 SFF rear drives.
– 3 Slots 7-8 top to bottom, not shown. Optional 2 SFF rear drives.
Page 2
QuickSpecs
Overview
HPE ProLiant DL385 Gen10 Plus v2 server
HPE ProLiant DL385 Gen10 Plus v2 Server – Internal View
1. 2 Processors (heat sinks shown)
7. OCP 3.0 Slot
2. Internal USB 3.1 Gen1 connector
8. Primary PCIe riser, standard (optional double wide GPU
riser)
3. Chassis intrusion detection connector
9. DDR4 DIMM slots. Shown fully populated in 32 slots (16 per
processor)
4. Hot Plug redundant HPE Flexible Slot Power supplies
10. Fan cage shown with 6 standard Hot-plug fans (high
performance fans optional)
5. Connection for second (optional) riser (requires second 11. Optional Smart Storage Battery location (Battery not shown) CPU)
6. Optional HPE Flexible Smart Array Controller (Type -a shown)
What’s New:
· Supports the latest AMD EPYC 7003 Series processors and additional selected
AMD EPYC 7002 Series processors · Supports a new AMD EPYC 7002 based pre-
configured/BTO SKU · Support for Tri-mode storage controllers for
SAS/SATA/NVMe drives · New Basic Carrier SAS/SATA/NVMe drives · European Union
(EU) Lot 9 regulation, please visit:
https://www.hpe.com/us/en/about/environment/msds-specs-more.html for more
information
Page 3
QuickSpecs
Overview
HPE ProLiant DL385 Gen10 Plus v2 server
Platform Information
Form Factor
· 2U rack
Chassis Types
· 8 SFF with optional Universal Media Bay, and optional SFF or NVMe drive bay
options · 24 SFF bay with 8 SFF mid tray drives and 4 SFF rear drive bay
option to total 36 SFF drives · 8 LFF with Universal Media Bay, and optional
SFF or NVMe drive bay options · 12 LFF with optional 4 LFF mid tray and
optional 4 LFF to total 20 LFF drives Notes: – DL385 Gen10 Plus v2 uses Basic
Carrier drive cages, not Smart Carrier drive cages as used on DL385 Gen10
Plus. – The 4 LFF rear drive box will consume space for the primary and
secondary riser. – The 8 and 12 LFF chassis also supports the 2 SFF rear drive
box which allows for the user to attach a secondary or tertiary riser. – The
24 SFF chassis already supports 3x 8 SFF SAS/SATA drive cage kits – The 8 NVMe
U.3 or U.2 cage kits (P27194-B21, P26931-B21, P26932-B21) can only be
leveraged in the SFF chassis and replaces Box 1, 2 or 3. – The Universal Media
Bay (P14609-B21) not available with the LFF chassis or the 24 SFF front, and
can only be populated in Box 1. – The 8 NVMe SFF can be upgraded with
additional two front 8 NVMe SFF U.3 or U.2 drive boxes (P27194-B21, P26931B21,
P26932-B21) to total 24 SFF NVMe drives, and up to 32 SFF NVMe drives with one
mid 8 NVMe SFF mid-tray drive cage (P39600-B21, P38847-B21). U.3 and U.2 front
and mid drive cages cannot mix. – U.3 x1 and x4 drive cages cannot mix. – The
8 LFF chassis cannot be upgraded to 12 LFF front in the field. – 12 LFF or
more drives require Max performance fan kit (P14608-B21). – CPU selection is
limited 225W (Turbo to 240W) or lower with 4LFF mid-tray selected & DIMM
blanks populate empty DIMM slots.
System Fans
Standard fan types included · The 8 SFF chassis ship with 4 standard fans as
standard. · The 8 LFF chassis ships with 6 standard fans as standard. · The 12
LFF and 24 SFF chassis ship with 6 max performance fans as standard. · Max
performance fan kit is available to meet ambient temperature environments. ·
Max performance fan kits are required for rear drives, or >155w Processors
SKUs, or if High Performance NVMe/SAS4 drives being used.
Page 4
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
Processors Up to 2 of the following depending on model.
Notes: For more information regarding AMD EPYC processors, please see the
following: https://www.amd.com/en/products/epyc
AMD EPYC Processor
EPYC 7763 EPYC 7713 EPYC 7663 EPYC 7643 EPYC 7543 EPYC 7513 EPYC 7453 EPYC
7443 EPYC 7413 EPYC 7343 EPYC 7313 EPYC 75F3 EPYC 74F3 EPYC 73F3 EPYC 72F3
EPYC 7773X EPYC 7573X EPYC 7473X EPYC 7373X EPYC 7402 EPYC 7302 EPYC 7252
Cores
64 64 56 48 32 32 28 24 24 16 16 32 24 16 8 64 32 24 16 24 16 8
Base Frequency
2.45 GHz 2.0 GHz 2.0 GHz 2.3 GHz 2.8 GHz 2.6 GHz 2.75 GHz 2.85 GHz 2.65 GHz
3.2 GHz 3.0 GHz 2.95 GHz 3.2 GHz 3.5 GHz 3.7 GHz 2.2 GHz 2.8 GHz 2.8 GHz 3.05
GHz 2.8 GHz 3.0 GHz 3.1 GHz
Max Frequency 3.5 GHz 3.675 GHz 3.5 GHz 3.6 GHz 3.7 GHz 3.65 GHz 3.45 GHz 4.0 GHz 3.6 GHz 3.9 GHz 3.7 GHz 4.0 GHz 4.0 GHz 4.0 GHz 4.1 GHz 3.5 GHz 3.6 GHz 3.7 GHz 3.8 GHz 3.35 GHz 3.3 GHz 3.2 GHz
Max Memory 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB 4TB
Wattage
280W 225W 240W 225W 225W 200W 225W 200W 180W 190W 155W 280W 240W 240W 180W
280W 280W 240W 240W 180W 155W 120W
Notes: All AMD EPYC processors can support up to 4TB of memory each
Cache
256MB 256MB 256MB 256MB 256MB 128MB 64MB 128MB 128MB 128MB 128MB 256MB 256MB
256MB 256MB 768MB 768MB 768MB 768MB 128MB 128MB 64MB
Memory
3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s
3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/s 3200MT/S
3200MT/S 3200MT/S 3200MT/S 3200MT/S 3200MT/S 3200MT/S
Chipset
No chipset System on Chip (SoC) design.
On System Management Chipset
HPE iLO 5 ASIC
Read and learn more in the iLO QuickSpecs.
Memory
One of the following depending on model
Type
DIMM Slots Available
Maximum capacity (LRDIMM)
HPE DDR4 SmartMemory, Registered (RDIMM) 32 16 DIMM slots per processor, 8 channels per processor, 2 DIMMs per channel 8.0TB 32 x 256 GB LRDIMM @ 3200 MT/s at 1 DPC, 2933 MT/s at 2 DPC
Notes: – The maximum memory speed is limited by the processor selection. –
3200 MT/s memory SKUs can run the transfer rate of 3200 MT/s at both 1 DIMM
and 2 DIMM per channel, except 256 GB
LRDIMM
Page 5
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
Memory Protection
Advanced ECC Advanced ECC uses single device data correction to detect and
correct single and all multibit error that occurs within a single DRAM chip.
Expansion Slots
Primary Riser
Notes: – Bus width indicates the number of physical electrical lanes running
to the connector. – There are 3 types of risers supported on Primary Slot –
When supporting Slot1 & Slot2 in below Primary Riser3 scenario, Slot1 & Slot2
combined can support up to 38GB/s
bandwidth, due to an AMD CPU limitation.
Primary Riser1
Slots # 1 2 3
Technology PCIe 4.0 PCIe 4.0 PCIe 4.0
Bus Width X8 X16 X8
Connector Width X16 X16 X16
Slot Form Factor Full-height,full-length slot Full-height,full-length slot Full-height,half-length slot
Notes Proc 1 Proc 1 Proc 1
Primary Riser2
Slots #
1 2 3
Technology PCIe 4.0 PCIe 4.0 NA
Bus Width X16 X16 NA
Connector Width X16 X16 NA
Slot Form Factor Full-height,full-length slot Full-height,full-length slot NA
Notes Proc 1 Proc 1 NA
Primary Riser3 (requires P14600-B21 + P14599-B21)
Slots #
Technology
Bus Width
1**
NA
NA
1
PCIe 4.0
X16
2
PCIe 4.0
X16
3
PCIe 4.0
X16
Connector Width NA X16 X16 X16
Slot Form Factor NA Full-height,full-length slot Full-height,full-length slot Full-height,half-length slot
Notes NA Proc 1 Proc 1 Proc 1
Notes: ** Default Slot1 on the Primary Riser3 is empty and not available. It requires P14600-B21 in conjunction with the Primary Riser3 to add additional x16 PCIe Gen4 in slot1.
Secondary Riser:
Notes: – Bus Width Indicates the number of physical electrical lanes running to the connector. – There are 3 types of risers support on Secondary Slot
Secondary Riser1
Slots # 4 5
Technology PCIe 4.0 PCIe 4.0
Bus Width X8 X16
Connector Width X16 X16
Slot Form Factor Full-height,full-length slot Full-height,full-length slot
6
PCIe 4.0
X8
X16
Full-height,half-length slot
Notes Proc 2 Proc 2
Proc 2
Secondary Riser2
Slots # 4
5
6
Technology PCIe 4.0 PCIe 4.0 NA
Bus Width X16 X16 NA
Connector Width X16 X16 NA
Slot Form Factor Full-height,full-length slot Full-height,full-length slot NA
Notes Proc 2 Proc 2 NA
Page 6
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
Secondary Riser3 (Requires P14600-B21 + P14590-B21)
Slots # 4* 4 5 6
Technology NA PCIe 4.0 PCIe 4.0 PCIe 4.0
Bus Width NA X16 X16 X16
Connector Width NA X16 X16 X16
Slot Form Factor NA Full-height,full-length slot Full-height,full-length slot Full-height,half-length slot
Notes NA Proc 2 Proc 2 Proc 2
Notes: * Default Slot4 on the Secondary Riser3 is empty and not available.It requires P14600-B21 in conjunction with the Secondary Riser3 to add additional x16 PCIe Gen4 in slot4
Tertiary Riser:
Notes: – Bus Width Indicates the number of physical electrical lanes running
to the connector. – There are 2 types of risers support on Tertiary Slot
Tertiary Riser1
Slots # 7 8
Tertiary Riser2
Slots # 7 8
Technology PCIe 4.0 NA
Technology PCIe 4.0 PCIe 4.0
Bus Width X16 NA
Bus Width X8 X8
Connector Width X16 NA
Slot Form Factor
Notes
Full-height,full-length slot Proc 2
NA
NA
Connector Width X16 X16
Slot Form Factor
Notes
Full-height,full-length slot Proc 2
Full-height,full-length slot Proc 2
Storage Controllers
The Gen10/Gen10 Plus controller naming framework has been updated to simplify
identification as depicted below. For a more detailed breakout of the
available Gen10/Gen10 Plus Smart Array controllers visit the HPE Smart Array
Gen10 Controllers Data Sheet.
HPE also launched Tri-Mode controllers which will support NVMe U.3/U.2 drives
as wells as SAS/SATA drives. Please see below list for the tri-mode
controllers supported on the server.
One of the following depending on model
NVMe Boot Device
· HPE NS204i-p NVMe PCIe3 OS Boot Device Notes: – NS204i-p will only be
supported in Slot 1 of the primary riser. – NS204i-p and Primary Riser HPE
DL38X Gen10+ 2×16 Slot 2/3 FIO Kit (P14599-B21) are selected then HPE DL38X
Gen10+ Slot1 x16 Slot2/3 Kit (P14600-B21) also must be in the configuration. –
Legacy Mode setting (758959-B21) and NS204i-p cannot be selected together. –
HPE Universal SATA AIC HHHL M.2 SSD Kit (878783-B21) and NS204i-p cannot be
selected together. – When NS204i-p and doublewide GPU are selected together
Secondary Riser MUST be selected and doublewide GPU can be
maximum of 2.
Software RAID HPE Smart Storage SR100i SR Gen10 Plus SW RAID
· All models feature an embedded storage controller, capable of operating on
AHCI or SR100i modes, with embedded software supporting RAID for up to 2 U.3
NVMe SSDs.
· HPE Smart Storage SR100i SR Gen10 Plus SW RAID will operate in UEFI mode
only. Legacy Mode (758959-B22) and SR100i Gen10 Plus SW RAID CAN NOT be
selected together. For legacy support, an additional controller will be
needed.
· SR100i cannot be selected with 878783-B21 Universal SATA HH M.2 Kit or
P12965-B21 HPE NS204i-p Gen10+ NVMe Boot Device.
· SR100i can only be selected with 8SFF CTO and 8LFF CTO servers. · SR100i
cannot be selected with P4610, P4510 or P4800x SSD drives.
Page 7
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
· SR100i cannot be selected with P26932-B21 HPE DL300 Gen10+ 2U 8SFF x4 NVMe
U.2 Kit · Embedded SATA controller by default will work in AHCI Mode. HPE
Smart Storage SR100i SR Gen10 Plus SW RAID can be
enabled by selecting HPE SR100i Gen10 Plus Software RAID (P28417-B21). ·
Supports Microsoft Windows Server only.
Essential RAID Controller
· HPE Smart Array E208i-a SR Gen10 Controller · HPE Smart Array E208i-p SR
Gen10 Controller · HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controller
· HPE Smart Array P408i-a SR Gen10 Controller · HPE Smart Array P408i-p SR
Gen10 Controller · HPE Smart Array P408e-p SR Gen10 Controller · HPE Smart
Array P816i-a SR Gen10 Controller Notes: Performance RAID Controllers require
the HPE Smart Storage Battery (P01366-B21) which is sold separately.
Tri-Mode RAID Controller
· HPE Tri-Mode MR216i-a Gen10 Plus Controller · HPE Tri-Mode MR216i-p Gen10
Plus Controller · HPE Tri-Mode MR416i-a Gen10 Plus Controller · HPE Tri-Mode
MR416i-p Gen10 Plus Controller · HPE Tri-Mode SR416i-a Gen10 Plus Controller ·
HPE Tri-Mode SR932i-p Gen10 Plus Controller
Internal Storage Devices
One of the following depending on model
Optical Drive
· Ships standard in Performance Models · Optional: DVD-ROM, DVD-RW
Hard Drives
· None ship standard
Graphics
Integrated Video Standard
· Video modes up to 1920 x 1200@60Hz (32 bpp) · 16MB Video Memory
HPE iLO 5 on system management memory
· 32 MB Flash · 4 Gbit DDR 3 with ECC protection
Page 8
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
Maximum Internal Storage
Drive Hot Plug SFF SAS Hot Plug SFF SATA Hot Plug LFF SAS
Capacity 67.2TB 56.0 TB 390.6 TB
Hot Plug LFF SATA
390.6 TB
Hot Plug SFF SAS SSD 428.4 TB Hot Plug LFF SATA SSD 49.8 TB
Hot Plug SFF SATA SSD 215 TB
Hot Plug SFF NVMe
491.52TB NVMe
PCIe SSD
Configuration 24+4 x 2.4 TB* (with optional rear SFF drive cage) 24+4 x 2 TB (with optional rear SFF drive cage) 12+4+4 x 18 TB + 2 x 15.3 TB (with optional mid tray and rear LFF drive cage, plus 2 SFF SSD rear) 12+4+4 x 18 TB + 2 x 15.3 TB (with optional mid tray and rear LFF drive cage, plus 2 SFF SSD rear) 24+4 x 15.3 TB (with optional rear SFF drive cage) 12+4+4 x 0.96 TB
- 2 x 15.3 TB (with optional mid tray and rear LFF drive cage, plus 2 SFF SSD rear) 24+4 x 7.68 TB (with optional 2SFF drive cage) 24+8 x 15.36TB NVMe
Power Supply
· HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes:
Available in 94% Power Efficiency.
· HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes:
Available in 94%. Power Efficiency
· HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit Notes: –
Available in 96% Power Efficiency – 200-240VAC power input only.
· HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit Notes: –
Available in 94% Power Efficiency – 277VAC power input.
· HPE 800W Flex Slot 48VDC Hot Plug Low Halogen Power Supply Kit Notes: –
Available in 94% Power Efficiency – -48VDC power input.
· HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes: –
Available in 94% Power Efficiency. – 200-240VAC power input only.
· HPE 1600W ~48VDC Power Supply Kit
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and
physical design that allows for hot plug, tool-less installation into HPE
ProLiant Gen10 Plus Performance Servers. Flex Slot power supplies are
certified for high-efficiency operation and offer multiple power output
options, allowing users to “right-size” a power supply for specific server
configurations. This flexibility helps to reduce power waste, lower overall
energy costs, and avoid “trapped” power capacity in the data center. All pre-
configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord
(A0K02A). This jumper cord is also included with each standard AC power supply
option kit. If a different power cord is required, please check the ProLiant
Power Cables web page.
To review the power requirements for your selected system, please use the HPE
Power Advisor Tool.
For information on power specifications and technical content visit HPE Server
power supplies.
Page 9
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
Interfaces
Serial Display Port VGA Port Network Ports HPE iLO Remote Management Network
Port Front iLO Service Port
USB 3.1 Gen1
SID (Systems Insight Display)
Optional, rear 1 optional on both Universal Media Bay and LFF power switch
module 1 VGA Port standard at rear None. Choice of OCP or stand up card 1 Gb
Dedicated
1 standard (Not available on 12 LFF chassis or when SID is ordered, note iLO
dongle required, 880123-B21) Up to 7 total: 1 front, 2 rear, 2 internal
(secure), 2 optional USB 3.0 front via Universal Media Bay, or standard on 8
LFF chassis Optional
Notes: Not shipping as standard. Available as a CTO option or as a field upgrade (P14611-B21).
UEFI
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI).
Learn more at http://www.hpe.com/servers/uefi.
Operating Systems and Virtualization Software Support for ProLiant Servers
· Windows Server 2016 · Windows Server 2019 (Most Recent Version) · Windows
Server 2022 · VMware ESXi 6.7 U3 · VMware ESXi 7.0 U1/U2 · SUSE Linux
Enterprise Server (SLES) 12 SP5 · SUSE Linux Enterprise Server (SLES) 15 SP2 ·
Red Hat Enterprise Linux (RHEL) 8.3 · Citrix Hypervisor 8.2 · Ubuntu 20.04 LTS
Notes: For more information on Hewlett Packard Enterprise Certified and
Supported ProLiant Servers for OS and Virtualization Software and latest
listing of software drivers available for your server.
https://www.hpe.com/us/en/servers/server-operating-systems.html
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that
provides better manageability and more secured configuration than the legacy
ROM while interacting with your server at boot time. HPE ProLiant Gen10 Plus
servers have a UEFI Class 2 implementation and support both UEFI Mode
(default) and Legacy BIOS Mode. Notes: The UEFI System Utilities tool is
analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such
as
· Secure Boot and Secure Start enable for enhanced security · Operating system
specific functionality · Support for > 2.2 TB (using GPT) boot drives · USB
3.0 Stack
Page 10
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
HPE Server UEFI/Legacy ROM
· Embedded UEFI Shell · Mass Configuration Deployment Tool using iLO RESTful
API that is Redfish API Conformant · PXE boot support for IPv6 networks ·
Workload Profiles for simple performance optimization
UEFI Boot Mode only
· TPM 2.0 Support · NVMe Boot Support · iSCSI Software Initiator Support. ·
HTTP/HTTPs Boot support as a PXE alternative. · Boot support for option cards
that only support a UEFI option ROM Notes: For UEFI Boot Mode, boot
environment and OS image installations should be configured properly to
support UEFI.
Industry Standard Compliance
· ACPI 6.1 Compliant · PCIe 4.0 Compliant · WOL Support · Microsoft® Logo
certifications · PXE Support · VGA/Display Port
Notes: This support is on the optional Universal Media Bay. · USB 3.1 Gen1
Compliant (internal) · USB 2.0 Compliant (external ports)
Notes: This support is on the optional Universal Media Bay. · Energy Star ·
SMBIOS 3.1 · UEFI 2.6 · Redfish API · IPMI 2.0 · Secure Digital 2.0 · Advanced
Encryption Standard (AES) · Triple Data Encrytion Standard (3DES)
· SNMP v3 · TLS 1.2 · DMTF Systems Management Architecture for Server Hardware
Command Line Protocol (SMASH CLP) · Active Directory v1.0 · European Union
(EU) eco-design regulations for server and storage products, known as Lot 9,
go into effect on March 1st,2020. Among other requirements, for servers this
directive establishes power thresholds for idle state, as well as efficiency
and performance in active state which vary among configurations. HPE ProLiant
Gen10 servers are compliant with Lot9 requirements. For more information
regarding HPE Lot 9 conformance, please visit:
https://www.hpe.com/us/en/about/environment/msds-specs-more.html · ASHRAE
A3/A4 Notes: For additional technical thermal details regarding ambient
temperatures, humidity and features support please visit:
http://www.hpe.com/servers/ashrae. · UEFI (Unified Extensible Firmware
Interface Forum)
Page 11
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
Embedded Management
HPE Integrated Lights-Out (HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and
remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
Intelligent Provisioning
Hassle free server and OS provisioning for 1 or more servers with Intelligent
Provisioning. Learn more at
http://www.hpe.com/servers/intelligentprovisioning.
iLO RESTful API
iLO RESTful API is Redfish API conformance and offers simplified server
management automation such as configuration and maintenance tasks based on
modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.
Server Utilities
Active Health System
The HPE Active Health System (AHS) is an essential component of the iLO
management portfolio that provides continuous, proactive health monitoring of
HPE servers. Learn more at http://www.hpe.com/servers/ahs.
Active Health System Viewer
Use the Active Health System Viewer, a web-based portal, to easily read AHS
logs and speed problem resolution with HPE selfrepair recommendations, to
learn more visit: http://www.hpe.com/servers/ahsv.
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart
Update Manager (SUM) to optimize the firmware and driver updates of the
Service Pack for ProLiant (SPP). Learn more at
https://www.hpe.com/us/en/servers/smart-update.html .
iLO Amplifier Pack
Designed for large enterprise and service provider environments with hundreds
of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual
application (OVA) that delivers the power to discover, inventory and update
Gen8, Gen9 , Gen10 & Gen10 Plus HPE servers at unmatched speed and scale. Use
with an iLO Advanced License to unlock full capabilities. Learn more at
http://www.hpe.com/servers/iLOamplifierpack.
HPE iLO Mobile Application
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional
information please visit: http://www.hpe.com/info/ilo/mobileapp.
RESTful Interface Tool
RESTful Interface tool (iLOREST) is a single scripting tool to provision using
iLO RESTful API to discover and deploy servers at scale. Learn more at
http://www.hpe.com/info/resttool.
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy
with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows
PowerShell. Learn more at http://www.hpe.com/servers/powershell.
Page 12
QuickSpecs
Standard Features
HPE ProLiant DL385 Gen10 Plus v2 server
HPE OneView Standard
HPE OneView Standard can be used for inventory, health monitoring, alerting,
and reporting without additional fees. It can monitor multiple HPE server
generations. The user interface is similar to the HPE OneView Advanced
version, but the software-defined functionality is not available. Learn more
at http://www.hpe.com/info/oneview.
HPE Systems Insight Manager (HPE SIM)
Ideal for environments already using HPE SIM, it allows you to monitor the
health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides
you with basic support for non-HPE servers. HPE SIM also integrates with Smart
Update Manager to provide quick and seamless firmware updates. Learn more at
http://www.hpe.com/info/hpesim.
Warranty
This product is covered by a global limited warranty and supported by HPE
Services and a worldwide network of Hewlett Packard Enterprise Authorized
Channel Partners resellers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HPE Pointnext operational services or
customized service agreements. Hard drives have either a one year or three
year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite
support with next business day response. Warranty repairs may be accomplished
through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a Mandatory CSR
part; 2) Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have Hewlett Packard
Enterprise replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
Security
· UEFI Secure Boot and Secure Start support · Immutable Silicon Root of Trust
· FIPS 140-2 validation (iLO 5 certification in progress) · Common Criteria
certification (iLO 5 certification in progress) · Configurable for PCI DSS
compliance · Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser · Support for Commercial National Security
Algorithms (CNSA) · Tamper-free updates components digitally signed and
verified · Secure Recovery recover critical firmware to known good state on
detection of compromised firmware · Ability to rollback firmware · Secure
erase of NAND/User data · TPM (Trusted Platform Module) 2.0 option · Bezel
Locking Kit option · Chassis Intrusion detection option
Page 13
QuickSpecs
Optional Features
HPE ProLiant DL385 Gen10 Plus v2 server
Server Management
HPE iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise,
for all HPE ProLiant servers. The license includes the full integrated remote
console, virtual keyboard, video, and mouse (KVM), multi-user collaboration,
console record and replay, and GUI-based and scripted virtual media and
virtual folders. You can also activate the enhanced security and power
management functionality.
HPE iLO Advanced Premium Security Edition
HPE iLO Advanced Premium Security Edition for iLO 5 includes iLO Advanced
License plus high-end security modes, unique security capabilities, like
Automatic FW recovery; Runtime FW verification, and Secure erase. Learn more
about HPE iLO Advanced Premium Security Edition at:
http://www.hpe.com/servers/ilopremium.
HPE GreenLake for Compute Ops Management
HPE is intelligently transforming compute management with a completely new
as-a-service experience that delivers greater security, simplicity, and
efficiency through HPE GreenLake that securely streamlines operations from
edge-to-cloud, and automates key lifecycle tasks (onboard, update, manage and
monitor HPE servers), bringing the agility and greater efficiencies to
wherever compute devices reside via a unified single browser-based interface.
Compute Ops Management is built on a unique cloud-native architecture that
abstracts, manages and controls HPE servers regardless of physical location.
The management application resides in the HPE GreenLake cloud platform (access
via console.greenlake.hpe.com) and leverages the HPE GreenLake architecture,
security, and unified operations. Standard and Enhanced tier subscription
options are available.
For a complete list of SKUs and more information, visit the HPE GreenLake for
Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Supported Servers Complete list can be found here: https://www.hpe.com/info
/com-supported-servers
HPE OneView Advanced
HPE OneView brings a new level of automation to infrastructure management by
taking a template driven approach to provisioning, updating, and integrating
compute, storage, and networking infrastructure. It provides full-featured
licenses which can be purchased for managing Gen8, Gen9 , Gen10 & Gen10 Plus
servers. To learn more visit http://www.hpe.com/info/oneview.
HPE InfoSight for Servers
HPE InfoSight for Servers combines the cloud-based machine learning of
InfoSight with the health and performance monitoring of Active Health System
(AHS) and iLO to optimize performance and predict and prevent problems. The
end result is an intelligent environment that modernizes IT operations and
enhances the support experience by predicting and preventing the
infrastructure issues that lead to application disruptions, wasted IT staff
time and missed business opportunities. Learn more at
https://www.hpe.com/servers/infosight
Page 14
QuickSpecs
Optional Features
HPE ProLiant DL385 Gen10 Plus server
Rack and Power Infrastructure
The story may end with servers, but it starts with the foundation that makes
compute go and business grow. We’ve reinvented our entire portfolio of rack
and power products to make IT infrastructure more secure, more practical, and
more efficient. In other words, we have created a stronger, smarter, and
simpler infrastructure to help you get the most out of your IT equipment. As
an industry leader, Hewlett Packard Enterprise is uniquely positioned to
address the key concerns of power, cooling, cable management and system
access.
HPE G2 Advanced and Enterprise Racks are perfect for the server room or
today’s modern data center with enhanced airflow and thermal management,
flexible cable management, and a 10 year Warranty to support higher density
computing. HPE G2 PDUs offer reliable power in flexible form factors that
operate at temperatures up to 60°C, include color-coded outlets and load
segments and a low-profile design for optimal access to the rack and support
for dense rack environments.
HPE Uninterruptible Power Systems are cost-effective power protection for any
type workload. Some UPSs include options for remote management and extended
runtime modules so you’re critical dense data center is covered in power
outages.
HPE KVM Solutions include a console and switches designed to work with your
server and IT equipment reliably. We’ve got a costeffective KVM switch for
your first rack and multiple connection IP switches with remote management and
security capabilities to keep your data center rack up and running.
Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power
Infrastructure.
One Config Simple (SCE)
SCE is a guided self-service tool to help sales and non-technical people
provide customers with initial configurations in 3 to 5 minutes. You may then
send the configuration on for configuration help, or use in your existing
ordering processes. If you require “custom” rack configuration or
configuration for products not available in SCE, please contact Hewlett
Packard Enterprise Customer Business Center or an Authorized Partner for
assistance. https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#
Page 15
QuickSpecs
Service and Support
HPE ProLiant DL385 Gen10 Plus v2 server
HPE Pointnext – Service and Support
Get the most from your HPE Products. Get the expertise you need at every step
of your IT journey with HPE Pointnext Services. We help you lower your risks
and overall costs using automation and methodologies that have been tested and
refined by HPE experts through thousands of deployments globally. HPE
Pointnext Advisory Services, focus on your business outcomes and goals,
partnering with you to design your transformation and build a roadmap tuned to
your unique challenges. Our Professional and Operational Services can be
leveraged to speed up time-to-production, boost performance and accelerate
your business. HPE Pointnext specializes in flawless and on-time
implementation, on-budget execution, and creative configurations that get the
most out of software and hardware alike.
Consume IT on your terms
HPE GreenLake brings the cloud experience directly to your apps and data
wherever they are–the edge, colocations, or your data center. It delivers
cloud services for on-premises IT infrastructure specifically tailored to your
most demanding workloads. With a pay-per-use, scalable, point-and-click self-
service experience that is managed for you, HPE GreenLake accelerates digital
transformation in a distributed, edge-to-cloud world.
· Get faster time to market · Save on TCO, align costs to business · Scale
quickly, meet unpredictable demand · Simplify IT operations across your data
centers and clouds
Managed services to run your IT operations
HPE GreenLake Management Services provides services that monitor, operate, and
optimize your infrastructure and applications, delivered consistently and
globally to give you unified control and let you focus on innovation.
Recommended Services
HPE Pointnext Tech Care.
HPE Pointnext Tech Care is the new operational service experience for HPE
products. Tech Care goes beyond traditional support by providing access to
product specific experts, an AI driven digital experience, and general
technical guidance to not only reduce risk but constantly search for ways to
do things better. HPE Pointnext Tech Care has been reimagined from the ground
up to support a customer-centric, AI driven, and digitally enabled customer
experience to move your business forward. HPE Pointnext Tech Care is available
in three response levels. Basic, which provides 9×5 business hour availability
and a 2 hour response time. Essential which provides a 15 minute response time
24×7 for most enterprise level customers, and Critical which includes a 6 hour
repair commitment where available and outage management response for severity
1 incidents. https://www.hpe.com/services/techcare
HPE Pointnext Complete Care
HPE Pointnext Complete Care is a modular, edge-to-cloud IT environment service
that provides a holistic approach to optimizing your entire IT environment and
achieving agreed upon IT outcomes and business goals through a personalized
and customercentric experience. All delivered by an assigned team of HPE
Pointnext Services experts. HPE Pointnext Complete Care provides:
· A complete coverage approach — edge to cloud · An assigned HPE team ·
Modular and fully personalized engagement · Enhanced Incident Management
experience with priority access · Digitally enabled and AI driven customer
experience
https://www.hpe.com/services/completecare
Page 16
QuickSpecs
Service and Support
HPE ProLiant DL385 Gen10 Plus v2 server
Other related Services
HPE Server Hardware Installation
Provides for the basic hardware installation of HPE branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner.
https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=5981-9356enw
HPE Installation and Startup Service
Provides for the installation of your HPE hardware according to product
specifications including options. The HPE service delivery technician will
connect the product to a LAN as appropriate and enable remote support to allow
for automatic case creation for hardware failures. Installation and start up
services also includes the installation of one supported operating system type
(Windows® or Linux).
DC for Hyperscale
Complete Care for Hyperscale is available for Service Providers and HPC
customers who use a scale out approach to computing with a high volume
homogenous infrastructure and resilient architecture can take advantage of
this environment support tailored to their operating model.
HPE Factory Express for Servers and storage
HPE Factory Express offers configuration, customization, integration and
deployment services for HPE servers and storage products. Customers can choose
how their factory solutions are built, tested, integrated, shipped and
deployed. Factory Express offers service packages for simple configuration,
racking, installation, complex configuration and design services as well as
individual factory services, such as image loading, asset tagging, and custom
packaging. HPE products supported through Factory Express include a wide array
of servers and storage: HPE Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant
Server Blades, HPE BladeSystem, HPE 9000 servers as well as the MSAxxxx3PAR
suite, XP, rackable tape libraries and configurable network switches.
HPE Service Credits
HPE Service Credits offers flexible services and technical skills to meet your
changing IT demands. With a menu of service that is tailored to suit your
needs, you get additional resources and specialist skills to help you maintain
peak performance of your IT. Offered as annual credits, you can plan your
budgets while proactively responding to your dynamic business.
HPE Education Services
Keep your IT staff trained making sure they have the right skills to deliver
on your business outcomes. Book on a class today and learn how to get the most
from your technology investment. http://www.hpe.com/ww/learn
Page 17
QuickSpecs
Service and Support
HPE ProLiant DL385 Gen10 Plus v2 server
HPE Support Center
The HPE Support Center is a personalized online support portal with access to
information, tools and experts to support HPE business products. Submit
support cases online, chat with HPE experts, access support resources or
collaborate with peers. Learn more http://www.hpe.com/support/hpesc.
The HPE Support Center Mobile App allows you to resolve issues yourself or
quickly connect to an agent for live support. Now, you can get access to
personalized IT support anywhere, anytime. HPE Insight Remote Support and HPE
Support Center are available at no additional cost with a HPE warranty, HPE
Support Service or HPE contractual support agreement. Notes: HPE Support
Center Mobile App is subject to local availability.
For more information: http://www.hpe.com/services. Notes: HPE ProLiant DL385
Gen10 Plus Server is covered under the HPE Service Contract applied to the HPE
ProLiant Server. No separate HPE support services need to be purchased.
Warranty and Support Services will extend to include HPE options configured
with your server or storage device. The price of support service is not
impacted by configuration details. HPE sourced options that are compatible
with your product will be covered under your server support at the same level
of coverage allowing you to upgrade freely. Installation for HPE options is
available as needed. To keep support costs low for everyone, some high value
options will require additional support. Additional support is only required
on select high value workload accelerators, fibre switches, InfiniBand and UPS
batteries over 12KVA. See the specific high value options that require
additional support here.
Parts and Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and
materials necessary to maintain the covered hardware product in operating
condition, including parts and materials for available and recommended
engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or
the maximum usage limitations as set forth in the manufacturer’s operating
manual, product QuickSpecs, or the technical product data sheet will not be
provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or
eligible SSD/Flash Drives replaced by Hewlett Packard Enterprise due to
malfunction.
Page 18
QuickSpecs
Pre-configured Models
HPE ProLiant DL385 Gen10 Plus v2 server
Entry & Base Models
SKU Number
Model Name
Processor Number of Processors Memory Network Controller
Storage Controller
Hard Drive Internal Storage
Optical Drive Bay Optical Drive PCI-Express Slots Power Supply Fans Management
Energy Star Form Factor Warranty
P39122-B21 P39122-291 HPE ProLiant DL385 Gen10 Plus v2 7313 2.9GHz 16-core 1P
32GB-R 8SFF 800W PS Server 7313 (16-Core, 2.9 GHz, 155W) One processor 32 GB
RDIMM DR 3200 MT/s (1x 32 GB) BCM 57416 10GbE 2p BASE-T OCP3 Adptr plus choice
of standup card P408i-a Notes: 8-Port modular Smart Array. None ship as
standard 8 SFF Chassis (upgradeable to 24 SFF front + 8 SFF mid + 4SFF rear)
Optional None ship as standard 3-slots (x8, x16, x8) as standard 1x 800W HPE
FlexSlot Power Supply 4-standard fans Default: HPE iLO Standard with
Intelligent Provisioning, HPE OneView Standard (requires download) 3.0
certified
2U Rack, SFF Easy Install rails without CMA 3-year parts, 3-year labor, 3-year
onsite support with next business day response.
P39123-B21 P39123-291 HPE ProLiant DL385 Gen10 Plus v2 7513 2.6GHz 32-core 1P
32GB-R 8SFF 800W PS Server 7513 (32-Core, 2.6 GHz, 200W) One processor 32 GB
RDIMM DR 3200 MT/s (1x 32 GB) BCM 57416 10GbE 2p BASE-T OCP3 Adptr plus choice
of standup card P408i-a Notes: 8-Port modular Smart Array. None ship as
standard 8 SFF Chassis (upgradeable to 24 SFF front + 8 SFF mid + 4SFF rear)
Optional None ship as standard 3-slots (x8, x16, x8) as standard 1x 800W HPE
FlexSlot Power Supply 4-high performance fans Default: HPE iLO Standard with
Intelligent Provisioning, HPE OneView Standard (requires download) 3.0
certified
2U Rack, SFF Easy Install rails without CMA 3-year parts, 3-year labor, 3-year
onsite support with next business day response.
Page 19
QuickSpecs
Pre-configured Models
HPE ProLiant DL385 Gen10 Plus v2 server
Entry & Base Models
SKU Number
Model Name
Processor Number of Processors Memory Network Controller
Storage Controller
Hard Drive Internal Storage
Optical Drive Bay Optical Drive PCI-Express Slots Power Supply
Fans Management
Energy Star Form Factor Warranty
P55252-B21 P55252-291 HPE ProLiant DL385 Gen10 Plus v2 7313 3.0GHz 16-core 1P
32GB-R MR416i-a 8SFF 800W PS Server 7313 (16-Core, 2.9 GHz, 155W) One
processor 32 GB RDIMM DR 3200 MT/s (1x 32 GB) BCM 57416 10GbE 2p BASE-T OCP3
Adptr plus choice of standup card MR416i-a Notes: Supports Tri-mode. None ship
as standard 8 SFF Chassis (upgradeable to 24 SFF front + 8 SFF mid + 4SFF
rear) Optional None ship as standard 3-slots (x8, x16, x8) as standard 1x 800W
HPE FlexSlot Power Supply
4-standard fans Default: HPE iLO Standard with Intelligent Provisioning, HPE
OneView Standard (requires download) 3.0 certified
2U Rack, SFF Easy Install rails without CMA 3-year parts, 3-year labor, 3-year
onsite support with next business day response.
P55284-421
HPE ProLiant DL385 Gen10 Plus v2 7313 3.0GHz 16-core 1P 32GB-R MR416i-a 8SFF
800W PS EU Server 7313 (16-Core, 2.9 GHz, 155W) One processor 32 GB RDIMM DR
3200 MT/s (1x 32 GB) BCM 57416 10GbE 2p BASE-T OCP3 Adptr plus choice of
standup card MR416i-a Notes: Supports Tri-mode. None ship as standard 8 SFF
Chassis (upgradeable to 24 SFF front + 8 SFF mid + 4SFF rear) Optional None
ship as standard 3-slots (x8, x16, x8) as standard 1x 800W HPE FlexSlot Power
Supply Notes: EU Lot-9 compliant. 4-standard fans Default: HPE iLO Standard
with Intelligent Provisioning, HPE OneView Standard (requires download) 3.0
certified
2U Rack, SFF Easy Install rails without CMA 3-year parts, 3-year labor, 3-year
onsite support with next business day response.
Page 20
QuickSpecs
Pre-configured Models
HPE ProLiant DL385 Gen10 Plus v2 server
Entry Model (EPYC 7002 based)
SKU Number
P58451-B21
P58451-291
P58452-421
Model Name
HPE ProLiant DL385 Gen10 Plus v2 7252 3.1GHz 8-core 1P 32GB-R 8SFF 800W PS Server
Processor
7252 (8-Core, 3.1 GHz, 120W)
Number of Processors One processor
Memory
32 GB RDIMM DR 3200 MT/s (1x 32 GB)
Network Controller
BCM 57416 10GbE 2p BASE-T OCP3 Adptr plus choice of standup card
Storage Controller
MR416i-a Notes: Supports Tri-mode.
Hard Drive
None ship as standard
Internal Storage
8 SFF Chassis (upgradeable to 24 SFF front + 8 SFF mid + 4SFF rear)
Optical Drive Bay
Optional
Optical Drive
None ship as standard
PCI-Express Slots
3-slots (x8, x16, x8) as standard
Power Supply
1x 800W HPE FlexSlot Power Supply (EMEA SKU supports 96% eff. PSU)
Fans
4-standard fans
Management
Default: HPE iLO Standard with Intelligent Provisioning, HPE OneView Standard (requires
download)
Energy Star
3.0 certified
Form Factor
2U Rack, SFF Easy Install rails without CMA
Warranty
3-year parts, 3-year labor, 3-year onsite support with next business day response.
Country Code Key
xx1 = B21 Worldwide
xx1 = 291 Japan xx1 = 421 EMEA Notes: The -B21 WW SKU is to be ordered in all
countries other than Japan and countries required to order EU Lot-9 compliant
PSUs.
Page 21
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
European Union (EU) eco-design regulations for server and storage products,
known as Lot 9, go into effect on March 1st, 2020. Among other requirements,
for servers this directive establishes power thresholds for idle state, as
well as efficiency and performance in active state which vary among
configurations. HPE ProLiant Gen10 servers are compliant with Lot9
requirements.
For more information regarding HPE Lot 9 conformance, please visit:
https://www.hpe.com/us/en/about/environment/msds-specs-more.html
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
· Factory Integrated Models must start with a CTO Server. · FIO indicates that
this option is only available as a factory installable option. · All Factory
Integrated Models will be populated with sufficient hard drive blanks based on
the number of initial hard drives
ordered with the server. · Some options may not be integrated at the factory.
Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
SKU Number Processor
DIMM Slots Storage Controller PCIe Drive Cage – included Network Controller
Fans Management USB
HPE ProLiant
HPE ProLiant DL385 HPE ProLiant DL385 HPE ProLiant DL385
DL385 Gen10 Plus Gen10 Plus v2 12 LFF Gen10 Plus v2 8LFF Gen10 Plus v2 24 SFF
v2 8 SFF CTO
CTO Server
CTO Server
CTO Server
Server
P38411-B21
P38410-B21
P38409-B21
P38412-B21
Not included as
Not included as
Not included as
Not included as
standard
standard
standard
standard
32-DIMM slots**
32-DIMM slots**
32-DIMM slots**
32-DIMM slots**
Choice of HPE modular Smart Array and PCIe plug-in controller
Three standard in primary riser, upto Eight slots with 2 processors
8 SFF
12 LFF
8LFF
24 SFF
Choice of OCP or stand up card
4-Standard
6 Performance
6-Standard
6-Performance
HPE iLO with Intelligent Provisioning (standard), iLO Advanced and OneView (optional)
1x 3.0 standard plus 1x 3.0 standard plus 1x 3.0 standard plus 1x 3.0 standard plus
iLo front service port iLo front service port iLo front service port iLo front service port
Notes: – ** 32 DIMM slots require selection of 2 processors – HPE offers
multiple Trade Agreement Act (TAA) compliant configurations to meet the needs
of US Federal Government
customers. These products are either manufactured or substantially transformed
in a designated country. TAA compliance is only provided when HPE options are
included as part of factory integrated orders (CTO). – TAA compliant
configuration requires TAA versions of the CTO Server SKUs. – All CTO servers
are Energy Star 3.0 compliant.
Page 22
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
CTO Server Included Drive Cage Universal Media Bay ODD 8 SFF SAS/SATA Drive Cage 8 SFF SAS/SATA/NVMe (Mid-tray) 8 SFF NVMe U.3 Drive Cage 8 SFF NVME U.2 Drive Cage 2 SFF SATA/NVMe (Stacked/Front) 2 SFF SATA/NVMe (Side-by- side/Front) 2 SFF SAS/SATA/NVMe (Rear) ** 4 LFF SAS/SATA (Mid-tray) 2 LFF SAS/SATA (Rear) ***
8 SFF CTO Chassis 1x 8 SFF SAS/SATA Optional Optional Up to 2 Additional
Up to 1 Optional
Up to 3 Up to 3 1 Optional
Not available
2 Optional
Not available Not available
12 LFF CTO Chassis 12 LFF SAS/SATA Not available Not available Not available
Not available
Not available Not available Not available
Not available
2 Optional
1 Optional 2 Optional
8 LFF CTO Chassis 8 LFF SAS/SATA Not available Optional Not available
Not available
Not available Not available Not available
1 Optional
2 Optional
1 Optional 2 Optional
24 SFF CTO Chassis 3x 8 SFF SAS/SATA Not available Not available Not available
Up to 1 Optional
Not available Not available Not available
Not available
2 Optional
Not available Not available
Notes: – This applies to CTO configurations, field upgrades may differ
depending field configuration. – When 8 SFF NVMe U.3 or U.2 drive cages is
selected instead of SAS/SATA drive cages, HPE DL38X Gen10 8 SFF Front
Cage Removal FIO Option (873763-B21) must be selected – ** NVMe drives
supported in rear must be <= 10W – *** To support 2x2LFF drive cages in rear,
different 2LFF drive cages need to be selected. Refer to Drive Cage list in
later
section for more information
Step 2: Choose Required Options (only one of the following unless otherwise
noted)
Please select one B21 processor required below.
For second processor, please select the same processor model with B21 from Core Options HPE Processors section.
For example: first processor, select P38696-B21 then for second processor,
select P38696-B21 as well. Notes: – 8SFF CTO 1P models ship with 4 standard
fans. 12 LFF and 24 SFF CTO Servers ship with 6 Max performance fans
included; 8 LFF CTO Servers ship with 6 Standard fans included. Max
performance fan kit is available to meet ambient temperature environments are
required for rear drives or NVMe SFF configurations. – Mixing of 2 different
processor models are NOT allowed. – Processors greater than 155W will require
the High Performance Heat sink. – Processors greater than 155W will require
the Max Performance Fan Kit. – Processor kits don’t include heat sink and
fans.
Step 2a: Choose Processors
Processor Option Kits
AMD EPYC 7763 2.45GHz 64-core 280W Processor for HPE
P38696-B21
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This processor needs selection of a Max Performance Fan Kit (P14608-B21) – This processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7713 2.0GHz 64-core 225W Processor for HPE
P38693-B21
Notes: – This processor doesn’t include a fan kit or a heat sink kit.
Page 23
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
– This processor needs selection of a Max Performance Fan Kit (P14608-B21) –
This processor needs selection of a High Performance Heat Sink Kit
(P14610-B21)
AMD EPYC 7663 2.0GHz 56-core 240W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7643 2.3GHz 48-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 75F3 2.95GHz 32-core 280W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7543 2.8GHz 32-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7513 2.6GHz 32-core 200W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7453 2.75GHz 28-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 74F3 3.2GHz 24-core 240W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7443 2.85GHz 24-core 200W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
P38690-B21 P39365-B21 P38708-B21 P38687-B21 P38684-B21 P38678-B21 P38705-B21 P38681-B21
Page 24
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
AMD EPYC 7413 2.65GHz 24-core 180W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – This processor needs selection of a Max Performance Fan Kit (P14608-B21)
– This processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 73F3 3.5GHz 16-core 240W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – This processor needs selection of a Max Performance Fan Kit (P14608-B21)
– This processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7343 3.2GHz 16-core 190W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – This processor needs selection of a Max Performance Fan Kit (P14608-B21) – This processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7313 3.0GHz 16-core 155W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – This processor needs selection of a Standard Fan Kit (P37042-B21) – This processor needs selection of a Standard Heat Sink Kit (P39994-B21)
AMD EPYC 72F3 3.7GHz 8-core 180W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – This processor needs selection of a Max Performance Fan Kit (P14608-B21) – This processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7773X 2.2GHz 64-core 280W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – See below table for more support conditions
Supported chassis/drive cage and ambient temperature
System Config
Ambient Temperature
24SFF NVMe/SAS/SATA (All Boxes)
25C
16SFF NVMe (Box 1 and 2 only); SAS/SATA (Box 2 and 3 only)
25C
8SFF NVMe (Box 2 only); SAS/SATA (Box 3 only)
30C
12LFF SAS/SATA
25C
8LFF SAS/SATA
30C
Restrictions
1. No mid-tray supported
2. Requires selection of a Max Performance Fan Kit (P14608-B21)
3. Requires selection of a High Performance Heat Sink Kit (P14610-B21)
4. SAS4 drives should be treated as NVMe drives
5. Requires DIMM blanks
AMD EPYC 7573X 2.8GHz 32-core 280W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – See below table for more support conditions.
P38675-B21 P38702-B21 P38672-B21 P38669-B21 P38699-B21 P46915-B21
P46921-B21
Page 25
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
Supported chassis/drive cage and ambient temperature
System Config 24SFF NVMe/SAS/SATA (All Boxes) 16SFF NVMe (Box 1 and 2 only);
SAS/SATA (Box 2 and 3 only) 8SFF NVMe (Box 2 only); SAS/SATA (Box 3 only)
12LFF SAS/SATA 8LFF SAS/SATA
Ambient Temperature 25C 25C 30C 25C 30C
Restrictions 1. No mid-tray supported 2. Requires selection of a Max Performance Fan Kit (P14608-B21) 3. Requires selection of a High Performance Heat Sink Kit (P14610-B21) 4. SAS4 drives should be treated as NVMe drives 5. Requires DIMM blanks
AMD EPYC 7473X 2.8GHz 24-core 240W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – See below table for more support conditions.
Supported chassis/drive cage and ambient temperature
System Config
Ambient Temperature
16SFF SAS/SATA (Box 2 and 3)
30C
8SFF NVMe (Box 2 only); SAS/SATA (Box 3 only)
30C
8LFF SAS/SATA
30C
Restrictions 1. No mid-tray supported 2. Requires selection of a Max Performance Fan Kit (P14608-B21) 3. Requires selection of a High Performance Heat Sink Kit (P14610-B21) 4. SAS4 drives should be treated as NVMe drives 5. Requires DIMM blanks
AMD EPYC 7373X 3.05GHz 16-core 240W Processor for HPE
Notes:
– This processor doesn’t include a fan kit or a heat sink kit. – See below table for more support conditions.
– This processor could support other configurations with specific ambient temperature requirements. Contact HPE local sales representative for more information.
Supported chassis/drive cage and ambient temperature
System Config
Ambient Temperature
8SFF SAS/SATA (Box 3 only)
25C
8SFF NVMe (Box 2 only)
22C
Restrictions
1. No mid-tray supported 2. Requires selection of a Max Performance Fan Kit (P14608-B21) 3. Requires selection of a High Performance Heat Sink Kit (P14610-B21) 4. SAS4 drives should be treated as NVMe drives 5. Requires DIMM blanks
AMD EPYC 7402 2.8GHz 24-core 180W FIO Processor Kit for HPE ProLiant DL385
Gen10 Plus v2
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
P46924-B21 P46927-B21 P57789-B21
Page 26
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
AMD EPYC 7302 3.0GHz 16-core 155W Processor Kit for HPE ProLiant DL365 Gen10
Plus
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Standard Fan Kit (P37042-B21) – This processor
needs selection of a Standard Heat Sink Kit (P39994-B21)
AMD EPYC 7252 3.1GHz 8-core 120W FIO Processor Kit for HPE ProLiant DL385
Gen10 Plus v2
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Standard Fan Kit (P37042-B21) – This processor
needs selection of a Standard Heat Sink Kit (P39994-B21)
P39370-B21 P57790-B21
CPU Support in Different Chassis Configurations
Chassis config 8SFF, 16SFF SAS/SATA with standard fan & standard heat sink
8SFF, 16SFF NVMe with Perf fan & Perf heat sink 24SFF, >=1SFF NVMe, w/ Perf
Fan & Perf heat sink kit 12LFF w/ Perf Fan & Perf heat sink kit 8LFF w
Standard Fan and Standard Heat sink 12+4LFF, 12+4+4LFF w Perf Fan & Perf Heat
sink kit 24+8SFF w/ Perf Fan & Perf Heat sink kit
25C ambient 155W (Turbo to 180W) 280W 280W
280W 155W (Turbo to 180W) 225W (Turbo to 240W) 225W (Turbo to 240W)
35C ambient 155W (Turbo to 180W) 225W (Turbo to 240W) 225W (Turbo to 240W)
225W (Turbo to 240W) 155W (Turbo to 180W) None None
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen10 Plus memory population rule whitepaper and optimal memory
performance guidelines, please go to: http://www.hpe.com/docs/amd-population-
rules-Gen10Plus
For Gen10 Plus memory speed table, please go to: http://www.hpe.com/docs/amd-
speed-table-Gen10Plus Notes: – Memory DIMM availability with a server
platform is dependent upon completion of certification testing. – The maximum
memory speed is a function of the memory type, memory configuration, and
processor model. – System may throttle if ambient temp. is over 30C. – Memory
compatibility may vary or be limited within a specific server family depending
upon the specific configuration
being requested. Because each server environment and requirements can vary,
memory compatibility is based not only upon the server family, but may also be
affected by the amount and type of additional hardware options installed
within a specific server configuration. For this reason, some HPE memory DIMMs
may be qualified for a server model or family and yet occasionally not be
supported with limited configurations within that server family. Please
consult with the HPE server Quickspecs or your HPE representative if you have
any questions regarding memory compatibility with a specific HPE server
configuration.
Registered DIMMs (RDIMMs) HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit. HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Memory Kit HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 128GB (1x128GB) Quad Rank x4 DDR4-3200 CAS-22-22-22 Load Reduced Smart Memory Kit HPE 256GB (1x256GB) Octal Rank x4 DDR4-3200 CAS-26-22-22 Load Reduced 3DS Smart Memory Kit
P07638-B21 P07640-B21 P07642-B21 P38454-B21 P07646-B21 P07650-B21 P07652-B21 P07654-B21
Page 27
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
Recommended System Ambient Temperature for 256GB LRDIMM
System Config
Ambient Temperature
12LFF
Not support
12LFF + 4LFF (mid)
Not support
8LFF
25C
24SFF
Not support (SAS/SATA/NVMe)
24SFF+8SFF (mid)
Not support (SAS/SATA/NVMe)
16SFF (SAS/SATA)
25C
16SFF (NVMe)
Not support
8SFF (SAS/SATA)
25C
8SFF (NVMe)
Not support
Notes: – Mixing of x4 & x8 memory is not allowed – 8GB~128GB memory SKUs can
run the transfer rate of 3200 MT/s at both 1 DIMM and 2 DIMM per
channel – 256GB memory SKU can run the transfer rate of 3200 MT/s at 1 DIMM
per channel, but only 2933 MT/s
at 2 DIMM per channel
Rules for mixing different types of DIMMs
RDIMM
LRDIMM
3DS LRDIMM (256GB)
RDIMM LRDIMM 3DS LRDIMM (256GB)
Allowed Not Allowed Not Allowed
Not Allowed Allowed Not Allowed
Not Allowed Not Allowed Allowed
Memory Blank Kit
HPE DDR4 DIMM Blank Kit
P07818-B21
Notes: Required only when configuration includes 4LFF Mid Tray kit or 8SFF Mid Tray kit and a processor(s) that is 155W and above.
Step 2c: Choose Power Supplies
Select one or two power supplies from below. Notes: Mixing of 2 different
power supplies is NOT allowed.
HPE Flex Slot Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865408-B21
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
865438-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
P38995-B21
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
865434-B21
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
865428-B21
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
P38997-B21
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit
P17023-B21
HPE 1600W -48VDC Power Cable Lug Kit
P36877-B21
Notes: – HPE 1600W DC PSU Power Lug Option Kit (P36877-B21) or HPE 1600W DC
PSU Power Cable Kit
(P22173-B21) is to be used with HPE 1600W Flex Slot -48VDC Power Supply Kit –
Only one power cable lug kit needs to be selected with the power supply
Notes: – Select one or more power supplies. – 1600W Power supplies only support high line voltage (200VAC to 240VAC).
Page 28
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
– Prior to making a power supply selection it is highly recommended that the
HPE Power Advisor is run to determine the right size power supply for your
server configuration. The HPE Power Advisor is located
at:http://www.hpe.com/info/poweradvisor.
– All power supplies in a server should match. Mixing Power Supplies is not
supported. – HPE ProLiant servers ship with an IEC-IEC power cord used for
rack mounting with Power Distribution
Units (PDUs). Visit HPE power cords for a full list of optional power cords.
Step 3: Choose Additional Factory Integratable Options
One of the following from each list may be selected if desired at time of
factory integration
HPE Unique Options
HPE DL38X Gen10 Plus Primary NEBS-compliant Riser Kit
Notes: – This riser kit contains a primary riser PCA with 3 slots for
x8/x16/x8 – When ths kit is selected and if customer wants to select Sec or
Ter Riser then the risers must be NEBS
Risers only (P14575-B21 OR P14577-B21 ) – Max =2 of this kit can be selected –
A Max Qty=1 Doublewide GPU per riser. The top x16 PCIe slot connector on this
riser kit CANNOT be
utilized as the Doublewide GPU occupies this space – When HPE DL38X Gen10+
Prim NEBS Riser Kit (P14575-B21) is Qty =2, HPE DL38X Gen10+ Tertiary
NEBS Riser Kit (P14577-B21) CANNOT be selected – When P14575-B21 is Qty=1 then
it must be installed in Primary. When P14575-B21 is Qty =2 then 2nd
processor must be selected – When this kit is selected, A100 GPU card cannot
be selected
HPE DL38X Gen10 Plus Tertiary NEBS-compliant Riser Kit
Notes: – This riser kit contains a secondary riser PCA with 3 slots for
x8/x16/x8 and a tertiary riser PCA with 1 slot
for x16 – Requires the selection of a 2nd processor – When ths kit is selected
and if customer wants to select Sec or Ter Riser then the risers must be NEBS
Risers only (P14575-B21 OR P14577-B21) – When HPE DL38X Gen10+ Prim NEBS Riser
Kit (P14575-B21) is Qty =2, HPE DL38X Gen10+ Tertiary
NEBS Riser Kit (P14577-B21) CANNOT be selected – Max Qty=2 Doublewide GPU per
riser kit
Max Qty=4 Singlewide/ Half Length GPU per riser kit – When HPE DL38X Gen10+
Tertiary NEBS Riser Kit (P14577-B21) is selected HPE DL38X Gen10+ Prim
NEBS Riser Kit (P14575-B21) MUST BE selected – When this kit is selected, A100
GPU card cannot be selected
HPE DL38X Gen10 Plus x16/x16 Slot 1/2 FIO Riser Kit
Notes: – Supports Full Height and Full length cards. – Bus width x16, x16,
Connector Width x16, x16 – Slot 1 or 2 in Primary or Secondary location
HPE DL38X Gen10 Plus x16/x16 Slot 2/3 FIO Riser Kit
Notes: – Slot 2,3 in Primary location – Supports Full Height and Full length
cards on slot 2 only – Bus width x16, x16, Connector Width x16, x16 – Requires
the option HPE Gen10 Plus Slot1 x16 Adder S2/3 Rsr Kit (P14600-B21), to add
additional x16
PCIe Gen4 in slot 1
P14575-B21 P14577-B21
P14592-B21 P14599-B21
Page 29
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
HPE DL38X Gen10 Plus x8/x16/x8 Secondary Riser Kit
Notes: – Requires selection of a 2nd processor – Slot 1, 2, 3 Secondary
location – Supports Full Height and Full length cards on slot 1, 2 only – Bus
width x8, x16, x8 Connector Width x16, x16, x16
HPE DL38X Gen10 Plus x16/x16 Slot 1/2 Secondary Riser Kit
Notes: – Requires selection of a 2nd processor – Slot 1 or 2 Secondary
location – Supports Full Height and Full length cards. – Bus width x16, x16
Connector Width x16, x16
HPE DL38X Gen10 Plus x16/x16 Slot 2/3 Secondary Riser Kit
Notes: – Requires selection of a 2nd processor – Slot 2 or 3 in Secondary
location – Supports Full Height and Full length cards on slot 2 only – Bus
width x16, x16, Connector Width x16, x16
HPE DL38X Gen10 Plus x8/x8 Tertiary Riser Kit
Notes: – Supports Full Height, Full-length cards and Full Height, Half- length
cards. – Bus width x8, x8, Connector Width x16, x16. HPE DL38X Gen10 Plus x16
Tertiary Riser Kit
Notes: – Requires selection of a 2nd processor – Slot 1 in Tertiary location –
Supports Full Height and Full length cards – Bus width x16, Connector Width
x16
HPE DL38X Gen10 Plus Slot1 x16 Adder for Slot2/3 Riser Kit
Notes: – Thi is required to add additional x16 PCIe Gen4 lanes for
Primary/Secondary Risers (P14599-B21) or
(P14590-B21)
HPE DL385 Gen10 Plus Primary/Secondary Riser Cage without Retainer Clip
Notes: – This is required when an A100 GPU card is selected – Max =2 of this
kit can be selected – If Q’ty =2 of this kit is selected then a secondary
riser must be selected HPE DL385 Gen10 Plus Tertiary Riser Cage without
Retainer Clip
Notes: – This is required when an A100 GPU card is selected – Max =1 of this
kit can be selected – This option requires selection of a Tertiary Riser
HPE ProLiant DL385 Gen10 Plus v2 8NVMe U.3 2P Balanced FIO Bundle Kit
Notes: – This is a trigger SKU having the below list of options bundled
together. This bundle SKU needs to be
selected in order to support 8 NVMe drives with two processors
P14587-B21 P14589-B21 P14590-B21 P14581-B21 P14588-B21 P14600-B21 P38771-B21
P38774-B21 P42076-B21
Page 30
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
HPE DL Gen10 Plus 8NVMe CPU1/2 Cable kit (P22829-B21) HPE DL300 Gen10 Plus
8SFF x4 U.3 Basic Carrier Drive Cage Kit (P26931-B21) HPE DL Gen10 Plus Max
Performance Fan (P14608-B21) – Requires 2nd Processor
HPE ProLiant DL385 Gen10 Plus v2 8NVMe U.3 1P Direct FIO Bundle Kit
Notes: – This is a trigger SKU having the below list of options bundled
together. This bundle SKU needs to be
selected in order to support 8 NVMe drives with one processor only HPE DL38X
Gen10 Plus 8NVMe CPU1 Cable Kit (P22834-B21) HPE DL38X Gen10 Plus AROC to NVMe
Adapter Kit (P14602-B21) HPE DL300 Gen10 Plus 8SFF x4 U.3 Basic Carrier Drive
Cage Kit (P26931-B21) HPE DL38X Gen10 Plus Max Performance Fan Kit
(P14608-B21) – This requires only one processor
HPE ProLiant DL385 Gen10 Plus v2 16NVMe U.3 2P Balance FIO Bundle Kit
Notes: – This is a trigger SKU having the below options bundled together. This
bundle SKU needs to be selected in
order to support 16 NVMe drives with two processors HPE DL38X Gen10 Plus
16NVMe CPU1/2 Cable Kit (P22835-B21) HPE DL38X Gen10 Plus AROC to NVMe Adapter
Kit (P14602-B21) HPE DL300 Gen10 Plus 8SFF x4 U.3 Basic Carrier Drive Cage Kit
(P26931-B21) HPE DL38X Gen10 Plus Max Performance Fan Kit (P14608-B21) – This
requires 2nd Processor to be selected
HPE ProLiant DL385 Gen10 Plus v2 24NVMe U.3 2P Balance FIO Bundle Kit
Notes:
– When this option is selected the following options MUST be populated in the
config:
HPE DL300 Gen10 Plus 8SFF x4 U.3 Basic Carrier Drive Cage Kit (P26931-B21)
Qty-3 HPE DL38X Gen10+ AROC-NVMe Kit (P14602-B21) Qty-1 HPE DL385 Gen10+ x16
Re-Timer Card (P25527-B21) Qty-2 HPE DL38X Gen10+ Max Perf Fan Kit
(P14608-B21) Qty-1 HPE DL38X Gen10+ 8NVMe CPU1/2 Cbl Kit (P22829-B21) Qty-1
HPE DL Gen10 Plus 16NVMe CPU1/2 Cable Kit (P22835-B21) Qty-1 HPE DL385 Gen10+
Re-Timer PRI Cable Kit (P25602-B21) Qty-2 HPE DL385 Gen10+ Re-Timer SEC Cable
Kit (P25604-B21) Qty-2 Must select 2nd Processor Must select secondary riser –
This option and AROC Controller can not be selected together – When this
option is selected HPE 8SFF Front Remove SPEC Perf FIO (873763-b21) MUST be
selected – When this option is selected HPE DL38X Gen10+ High Perf Heat Sink
Kit (P14610-B21) MUST be selected
HPE ProLiant DL385 Gen10 Plus v2 8NVMe U.2 2P Balance FIO Bundle Kit
Notes: – This is a trigger SKU having the below options bundled together .
This bundle SKU needs to be selected in
order to support 8 U.2 NVMe drives balanced across 2 processors – When this
option is selected the following options MUST be populated in the config:
HPE DL Gen10 Plus 8NVMe CPU1/2 Cable kit (P22829-B21) Qty-1 HPE DL300 Gen10
Plus 8SFF x4 U.2 Basic Carrier Drive Cage Kit (P26932-B21) Qty-1 HPE DL Gen10
Plus Max Perf Fan (P14608-B21) Qty-1 Must select 2nd Processor
P42079-B21 P42082-B21 P42085-B21
P42088-B21
Page 31
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
– This option and HPE DL38X Gen10+ Slot1 x16 Slot2/3 Kit (P14600-B21) CAN NOT
be selected together – When this option is selected HPE DL38X Gen10+ High Perf
Heat Sink Kit (P14610-B21) MUST be
selected
HPE ProLiant DL385 Gen10 Plus v2 8NVMe U.2 1P Direct FIO Bundle Kit
Notes: – This is a trigger SKU having the below options bundled together .
This bundle SKU needs to be selected in
order to support 8 U.2 NVMe drives with one processor only – When this option
is selected the following options MUST be populated in the config:
HPE DL Gen10 Plus 8NVMe CPU1 Cable Kit (P22834-B21) Qty-1 HPE Gen10 Plus AROC
NVMe Adpt Kit (P14602-B21) Qty-1 HPE DL300 Gen10 Plus 8SFF x4 U.2 Basic
Carrier Drive Cage Kit (P26932-B21) Qty-1 HPE DL Gen10 Plus Max Perf Fan
(P14608-B21) Qty-1 – This Option and AROC Controller can not be selected
together – When this option is selected HPE DL38X Gen10+ High Perf Heat Sink
Kit (P14610-B21) MUST be selected – When this option is selected, P14600-B21
CAN NOT be selected with P14599-B21 Primary Riser kit.
HPE ProLiant DL385 Gen10 Plus v2 16NVMe U.2 2P Balance FIO Bundle Kit
Notes: – This is a trigger SKU having the below options bundled together .
This bundle SKU needs to be selected in
order to support 16 U.2 NVMe drives balanced across 2 processors – When this
option is selected the following options MUST to be populated in the config:
HPE DL Gen10 Plus 16NVMe CPU1/2 Cable Kit (P22835-B21) Qty-1 HPE Gen10 Plus
AROC NVMe Adpt Kit (P14602-B21) Qty-1 HPE DL300 Gen10 Plus 8SFF x4 U.2 Basic
Carrier Drive Cage Kit (P26932-B21) Qty-2 HPE DL Gen10 Plus Max Perf Fan
(P14608-B21) Qty-1 Must select 2nd Processor – This Option and AROC Controller
can not be selected together – When this option is selected HPE DL38X Gen10+
High Perf Heat Sink Kit (P14610-B21) MUST be selected – This option and HPE
DL38X Gen10+ Slot1 x16 Slot2/3 Kit (P14600-B21) CAN NOT be selected together
HPE ProLiant DL385 Gen10 Plus v2 24NVMe U.2 2P Balance FIO Bundle Kit
Notes: – This is a trigger SKU having the below options bundled together .
This bundle SKU needs to be selected in
order to support 24 U.2 NVMe drives balanced across 2 processors – When this
option is selected the following options MUST be populated in the config:
HPE DL300 Gen10 Plus 8SFF x4 U.2 Basic Carrier Drive Cage Kit (P26932-B21)
Qty-3 HPE DL38X Gen10+ AROC-NVMe Kit (P14602-B21) Qty-1 HPE DL385 Gen10+ x16
Re-Timer Card (P25527-B21) Qty-2 HPE DL38X Gen10+ Max Perf Fan Kit
(P14608-B21) Qty-1 HPE DL38X Gen10+ 8NVMe CPU1/2 Cbl Kit (P22829-B21) Qty-1
HPE DL Gen10 Plus 16NVMe CPU1/2 Cable Kit (P22835-B21) Qty-1 HPE DL385 Gen10+
Re-Timer PRI Cable Kit (P25602-B21) Qty-2 HPE DL385 Gen10+ Re-Timer SEC Cable
Kit (P25604-B21) Qty-2 Must select 2nd Processor Must select secondary Riser –
This Option and AROC Controller can not be selected together – When this
option is selected HPE DL38X Gen10+ High Perf Heat Sink Kit (P14610-B21) MUST
be selected – This option and HPE DL38X Gen10+ Slot1 x16 Slot2/3 Kit
(P14600-B21) CAN NOT be selected together
P42091-B21 P42094-B21 P42097-B21
Page 32
QuickSpecs
Configuration Information
HPE ProLiant DL385 Gen10 Plus v2 server
HPE DL38X Gen10 8 SFF Front Cage Removal FIO Option
873763-B21
Notes: – This is a factory integrated only option. – Will remove the default 8SFF cage in Box 3 of the 8SFF and replace with a Box blank.
HPE Security Options
HPE Server Security Optimized Service for HPE ProLiant (R9S59A) is an optional security upgrade intended for agencies and regulated industries with enhanced security and compliance needs. Applying this option to a DL3XX Gen10/Gen10 Plus CTO server ensures it is hardened by turning on advanced safeguards in place against cyber-exploits throughout the server lifecycle. An iLO Advanced License required for High Security Mode and compatible intrusion detection device option kits are prerequisites for the full optimization service.
Step 4: Choose additional options for Factory Integration from Core and Additional Options sections below
Page 33
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information.
HPE Unique Options
HPE DL38X Gen10 Plus Universal Media Bay Kit
P14609-B21
Notes: – The HPE DL385 Gen10 Plus Universal Media bay provides front Display
Port and 2xUSB 2.0; plus support
for 2x SFF front drives or 2 NVMe front drives and ODD support (Not included);
and can only be located in Box1 in either on 8 SFF or 8+8 SFF model. – This is
a 8SFF model option only. – This option cannot be ordered when Qty=2 of
following options is selected : HPE DL380 Gen10 Box1/2 Cage Bkpln Kit
(826691-B21) and HPE DL Gen10 Plus 8SFF x4NVMe/SAS SC Kit (P14578-B21)
HPE DL38X Gen10 Plus System Insight Display Kit
P14611-B21
HPE DL38X Gen10 Plus AROC to NVMe Adapter Kit
P14602-B21
Notes: Used to support upto 16 NVMe drives with Modular Controller (AROC)
HPE DL38X Gen10 Plus Maximum Performance Fan Kit
P14608-B21
Notes: – For elevated ambient temperature support please see:
http://www.hpe.com/servers/ashrae – Max Performance fan kit consists of 6
fans, these will need to replace all the standard fans in the unit, and
fill all 6 fan cages. – The 12 LFF and 24 SFF models (including field upgrades
to 24 SFF) will already include 6 Max
Performance fans. – The Max Performance fan kit is needed to support certain
Passive GPGPU (Graphics cards) configurations;
or ASHRAE operating environments.
HPE ProLiant DL3X5 Gen10 Plus Standard Heat Sink Kit
P39994-B21
Notes: Maximum support q’ty =2.
HPE DL38X Gen10 Plus High Performance Heat Sink Kit
P14610-B21
Notes: Maximum support q’ty =1. Processor kits above 155W include a High Performance Heat sink.
HPE Gen10 Plus Chassis Intrusion Detection Kit
P14604-B21
Notes: This provides a physical connection from the chassis board and hood and detects any physical intrusion into the chassis, providing security during the entire supply chain process of shipping, receiving, distribution, and operation.
HPE DL38X Gen10 Plus 12Gb SAS Expander Card
P23388-B21
Notes: HPE DL38X Gen10+ 12LFF SAS Exp Cbl Kit (P23392-B21) must be selected when Expander Card is selected for 12LFF or 8LFF CTO servers.
HPE Processors
Processor Option Kits
Notes: – Mixing of 2 different processor models are NOT allowed. – DDR4 memory
speed will depend on the quantity and type of DIMMs installed. – Processors
greater than 155W will require the High Performance Heat Sink. – Processors
greater than 155W will require the Max Performance Fan Kit. – Processor kits
don’t include heat sink and fans.
AMD EPYC 7763 2.45GHz 64-core 280W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
P38696-B21
Page 34
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
AMD EPYC 7713 2.0GHz 64-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7663 2.0GHz 56-core 240W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7643 2.3GHz 48-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 75F3 2.95GHz 32-core 280W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7543 2.8GHz 32-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7513 2.6GHz 32-core 200W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7453 2.75GHz 28-core 225W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 74F3 3.2GHz 24-core 240W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7443 2.85GHz 24-core 200W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
P38693-B21 P38690-B21 P39365-B21 P38708-B21 P38687-B21 P38684-B21 P38678-B21 P38705-B21 P38681-B21
Page 35
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
AMD EPYC 7413 2.65GHz 24-core 180W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 73F3 3.5GHz 16-core 240W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7343 3.2GHz 16-core 190W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
AMD EPYC 7313 3.0GHz 16-core 155W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Standard Fan Kit (P37042-B21) – This processor
needs selection of a Standard Heat Sink Kit (P39994-B21)
AMD EPYC 72F3 3.7GHz 8-core 180W Processor for HPE
Notes: – This processor doesn’t include a fan kit or a heat sink kit. – This
processor needs selection of a Max Performance Fan Kit (P14608-B21) – This
processor needs selection of a High Performance Heat Sink Kit (P14610-B21)
P38675-B21 P38702-B21 P38672-B21 P38669-B21 P38699-B21
Memory Selection
To streamline the configuration process for HPE ProLiant Gen10 Plus servers
and to provide the best product availability, Hewlett Packard Enterprise
recommends memory from the list located here: http:hpe.com/products/recommend.
Best product availability is limited to US, Canada, and Latin America at this
time.
HPE Memory
Notes: Memory compatibility may vary or be limited within a specific server
family depending upon the specific configuration being requested. Because each
server environment and requirements can vary, memory compatibility is based
not only upon the server family, but may also be affected by the amount and
type of additional hardware options installed within a specific server
configuration. For this reason, some HPE memory DIMMs may be qualified for a
server model or family and yet occasionally not be supported with limited
configurations within that server family. Please consult with the HPE server
Quickspecs or your HPE representative if you have any questions regarding
memory compatibility with a specific HPE server configuration.
Registered DIMMs (RDIMMs) HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit. HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Memory Kit HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P07638-B21 P07640-B21 P07642-B21 P38454-B21 P07646-B21 P07650-B21
Page 36
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Load Reduced DIMMs (LRDIMMs)
HPE 128GB (1x128GB) Quad Rank x4 DDR4-3200 CAS-22-22-22 Load Reduced Smart Memory Kit
P07652-B21
HPE 256GB (1x256GB) Octal Rank x4 DDR4-3200 CAS-26-22-22 Load Reduced 3DS Smart Memory Kit
P07654-B21
Recommended System Ambient Temperature for 256GB LRDIMM
System Config
Ambient Temperature
12LFF
Not support
12LFF + 4LFF (mid)
Not support
8LFF
25C
24SFF
Not support (SAS/SATA/NVMe)
24SFF+8SFF (mid)
Not support (SAS/SATA/NVMe)
16SFF (SAS/SATA)
25C
16SFF (NVMe)
Not support
8SFF (SAS/SATA)
25C
8SFF (NVMe)
Not support
Notes:
– Memory DIMM availability with a server platform is dependent upon completion of certification testing.
– The maximum memory speed is a function of the memory type, memory configuration, and processor model.
– Mixing of x4 & x8 memory is not allowed
– 8GB~128GB memory SKUs can run the transfer rate of 3200 MT/s at both 1 DIMM and 2 DIMM per channel
– 256GB memory SKU can run the transfer rate of 3200 MT/s at 1 DIMM per channel, but only 2933 MT/s at 2 DIMM per
channel
– 128GB and 256GB LRDIMM are not supported in a SFF chassis with mid-tray configurations
– 256GB LRDIMM cannot support in a 12LFF chassis, 12LFF chassis + 4LFF mid tray, 24SFF chassis, 24SFF chassis + 8SFF
mid tray and 8SFF/16SFF chassis with NVMe drives installed
HPE Optical Drives
HPE 9.5mm SATA DVD-ROM Optical Drive Notes: – HPE DL385 Gen10 Plus Universal
Media Bay Kit (P14609-B21) is required for this option on a SFF
model. – Supported only on 8 SFF & 8 LFF Models HPE 9.5mm SATA DVD-RW Optical
Drive Notes: – HPE DL385 Gen10 Plus Universal Media Bay Kit (P14609-B21) is
required for this option on a SFF
model. – Supported only on 8 SFF & 8 LFF Models HPE Mobile USB DVD-RW Optical
Drive
726536-B21 726537-B21 701498-B21
HPE Drives
Enterprise – 12G SAS – SFF Drives
HPE 300GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD
HPE 600GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD
HPE 600GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD
HPE 900GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD
HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi
Vendor HDD HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e
Multi Vendor HDD
P28028-B21 P40430-B21 P53561-B21 P53560-B21 P40432-B21 P28586-B21 P53562-B21 P28352-B21
Page 37
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Midline – 12G SAS – SFF Drives
HPE 1TB SAS 12G Business Critical 7.2K SFF BC 1-year Warranty HDD HPE 2TB SAS
12G Business Critical 7.2K SFF BC 1-year Warranty 512e HDD
Midline – 12G SAS – LFF Drives
HPE 2TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD
HPE 4TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD
HPE 6TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi
Vendor HDD HPE 8TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e
Multi Vendor HDD HPE 10TB SAS 12G Business Critical 7.2K LFF LP 1-year
Warranty 512e ISE Multi Vendor HDD HPE 12TB SAS 12G Business Critical 7.2K LFF
LP 1-year Warranty Helium 512e Multi Vendor HDD HPE 14TB SAS 12G Business
Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD HPE 16TB SAS
12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor
HDD HPE 18TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e
ISE Multi Vendor HDD HPE 20TB SAS 12G Business Critical 7.2K LFF LP 1-year
Warranty Helium 512e ISE Multi Vendor HDD
Midline – 6G SATA – SFF Drives
HPE 1TB SATA 6G Business Critical 7.2K SFF BC 1-year Warranty HDD HPE 2TB SATA
6G Business Critical 7.2K SFF BC 1-year Warranty 512e HDD
Midline – 6G SATA – LFF Drives
HPE 1TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD
HPE 2TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD
HPE 4TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD
HPE 6TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi
Vendor HDD HPE 8TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e
Multi Vendor HDD HPE 10TB SATA 6G Business Critical 7.2K LFF LP 1-year
Warranty 512e ISE Multi Vendor HDD HPE 12TB SATA 6G Business Critical 7.2K LFF
LP 1-year Warranty Helium 512e Multi Vendor HDD HPE 14TB SATA 6G Business
Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD HPE 16TB
SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi
Vendor HDD HPE 18TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty
Helium 512e ISE Multi Vendor HDD HPE 20TB SATA 6G Business Critical 7.2K LFF
LP 1-year Warranty Helium 512e ISE Multi Vendor HDD
SED (Self-Encryption Drive) HDDs
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Self-encrypting
HDD HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Self-
encrypting HDD Notes: – Requirements for MR Tri-mode controller SED support
TPM is not required for Local Key Management as key is stored in controller
iLO Advanced is required for Remote Key Management. Key is stored in remote
key manager (Ex. ESKM)
P53563-B21 P28505-B21
833926-B21 833928-B21 861746-B21 834031-B21 P53556-B21 881781-B21 P09155-B21
P23608-B21 P37669-B21 P53553-B21
P28610-B21 P28500-B21
861686-B21 861681-B21 861683-B21 861742-B21 834028-B21 P53557-B21 881787-B21
P09165-B21 P23449-B21 P37678-B21 P53554-B21
P28622-B21 P28618-B21
SSD Selection
To streamline the configuration process for HPE ProLiant Gen10 Plus servers and to provide the best product availability, HPE
recommends SSDs from the list located here: http://www.hpe.com/products/recommend.
Read Intensive – 12G SAS – SFF – Solid State Drives
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD
P40506-B21
HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD
P49029-B21
HPE 1.92TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD
P40507-B21
HPE 1.92TB SAS 24G Read Intensive SFF BC Multi Vendor SSD
P49031-B21
HPE 3.84TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD
P40508-B21
HPE 3.84TB SAS 24G Read Intensive SFF BC Multi Vendor SSD
P49035-B21
Page 38
QuickSpecs
Core Options
HPE 7.68TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD HPE 7.68TB
SAS 24G Read Intensive SFF BC Multi Vendor SSD HPE 15.36TB SAS 24G Read
Intensive SFF BC Multi Vendor SSD
Mixed Use – 12G SAS – SFF – Solid State Drives
HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD HPE 960GB SAS 12G Mixed
Use SFF BC Value SAS Multi Vendor SSD HPE 1.6TB SAS 24G Mixed Use SFF BC Multi
Vendor SSD HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD HPE
3.2TB SAS 24G Mixed Use SFF BC Multi Vendor SSD HPE 3.84TB SAS 12G Mixed Use
SFF BC Value SAS Multi Vendor SSD HPE 6.4TB SAS 24G Mixed Use SFF BC Multi
Vendor SSD
Mixed Use SAS LFF- Solid State Drives
HPE 960GB SAS 12G Mixed Use LFF LPC Value SAS Multi Vendor SSD
Read Intensive SAS LFF- Solid State Drives
HPE 7.68TB SAS 24G Read Intensive LFF LPC Multi Vendor SSD
Write Intensive – 12G SAS – SFF – Solid State Drives
HPE 400GB SAS 24G Write Intensive SFF BC PM6 SSD HPE 800GB SAS 24G Write
Intensive SFF BC PM6 SSD HPE 1.6TB SAS 24G Write Intensive SFF BC PM6 SSD
Mixed Use – 6G SATA – SFF – Solid State Drives
HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD HPE 480GB SATA 6G Mixed
Use SFF BC S4620 SSD HPE 480GB SATA 6G Mixed Use SFF BC PM897 SSD HPE 960GB
SATA 6G Mixed Use SFF BC Multi Vendor SSD HPE 960GB SATA 6G Mixed Use SFF BC
PM897 SSD HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD HPE 1.92TB SATA
6G Mixed Use SFF BC PM897 SSD HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor
SSD HPE 3.84TB SATA 6G Mixed Use SFF BC S4620 SSD
Read Intensive – 6G SATA – SFF – Solid State Drives
HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 480GB SATA 6G
Read Intensive SFF BC Multi Vendor SSD HPE 480GB SATA 6G Read Intensive SFF BC
PM893 SSD HPE 960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 960GB
SATA 6G Read Intensive SFF BC PM893 SSD HPE 1.92TB SATA 6G Read Intensive SFF
BC Multi Vendor SSD HPE 1.92TB SATA 6G Read Intensive SFF BC S4520 SSD HPE
1.92TB SATA 6G Read Intensive SFF BC PM893 SSD HPE 3.84TB SATA 6G Read
Intensive SFF BC Multi Vendor SSD HPE 3.84TB SATA 6G Read Intensive SFF BC
S4520 SSD HPE 3.84TB SATA 6G Read Intensive SFF BC PM893 SSD HPE 7.68TB SATA
6G Read Intensive SFF BC Multi Vendor SSD
Very Read Optimized – 6G SATA – SFF – Solid State Drives
HPE 7.68TB SATA 6G Very Read Optimized SFF BC 5400 SSD
Read Intensive 6G SATA – LFF Solid State Drives
HPE 960GB SATA 6G Read Intensive LFF LPC Multi Vendor SSD
HPE ProLiant DL385 Gen10 Plus v2 server
P40509-B21 P49041-B21 P49045-B21
P49047-B21 P40510-B21 P49049-B21 P40511-B21 P49053-B21 P40512-B21 P49057-B21
P37009-B21
P49040-B21
P40480-B21 P40481-B21 P40482-B21
P40502-B21 P47324-B21 P44011-B21 P40503-B21 P44012-B21 P40504-B21 P44013-B21
P40505-B21 P47327-B21
P40496-B21 P40497-B21 P44007-B21 P40498-B21 P44008-B21 P40499-B21 P47320-B21
P44009-B21 P40500-B21 P47322-B21 P44010-B21 P40501-B21
P58228-B21
P47808-B21
Page 39
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Very Read Optimized – 6G SATA – LFF – Solid State Drives
HPE 7.68TB SATA 6G Very Read Optimized LFF LPC 5400 SSD
Read Intensive – NVMe – SFF – Solid State Drives
HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static
Multi Vendor SSD HPE 1.9TB NVMe Gen4 Mainstream Performance Read Intensive SFF
BC U.3 Static Multi Vendor SSD HPE 3.84TB NVMe Gen4 Mainstream Performance
Read Intensive SFF BC U.3 Static Multi Vendor SSD HPE 4TB NVMe Gen3 High
Performance Read Intensive SFF BC U.2 P4510 SSD HPE 7.68TB NVMe Gen4
Mainstream Performance Read Intensive SFF BC U.3 Static Multi Vendor SSD
Mixed Use – NVMe – SFF – Solid State Drives
HPE 800GB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static Multi
Vendor SSD HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735
SSD HPE 1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static
Multi Vendor SSD HPE 3.2TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC
U.3 Static Multi Vendor SSD HPE 6.4TB NVMe Gen4 Mainstream Performance Mixed
Use SFF BC U.3 Static Multi Vendor SSD Notes: – PE8010 and PE8030 NVMe drives
cannot be supported with NVMe Adapters P25526-B21 or P25527-
B21 – PE8010 and PE8030 NVMe drives cannot be supported with SR932i-a or
SR416i-p tri-mode controllers. – SR100i SW RAID can only be supported with
PM1733 and PM1735 NVMe drives.
SED (Self-Encryption Drive) SSDs
HPE 800GB SAS 24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD HPE 1.6TB SAS
24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD HPE 3.84TB SAS 24G Read
Intensive SFF BC Self-encrypting FIPS PM6 SSD HPE 7.68TB SAS 24G Read
Intensive SFF BC Self-encrypting FIPS PM6 SSD HPE 960GB SATA 6G Mixed Use SFF
BC Self-encrypting 5300M SSD HPE 1.92TB SATA 6G Mixed Use SFF BC Self-
encrypting 5300M SSD HPE 480GB SATA 6G Read Intensive SFF BC Self-encrypting
5300P SSD HPE 1.92TB SATA 6G Read Intensive SFF BC Self-encrypting 5300P SSD
HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC Self-encrypting FIPS U.3
CM6 SSD HPE 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC Self-encrypting
FIPS U.3 CM6 SSD HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC
Self-encrypting FIPS U.3 CM6 SSD HPE 3.84TB NVMe Gen4 High Performance Read
Intensive SFF BC Self-encrypting FIPS U.3 CM6 SSD Notes: – Requirements for
Direct Attach SED support
TPM2.0 is required for Local Key Management. Keys will be locally encrypted
and stored by TPM iLO Advanced is required for Remote Key Management. Key is
stored in remote key manager (Ex.
ESKM) – Requirements for MR Tri-mode controller SED support
TPM is not required for Local Key Management as key is stored in controller
iLO Advanced is required for Remote Key Management. Key is stored in remote
key manager (Ex.
ESKM)
Internal Dual M.2 Kit
HPE Universal SATA 6G AIC HHHL M.2 SSD Enablement Kit Notes: – SATA M.2 cannot
be supported in LFF/SFF chassis with mid tray configuration due to thermal
concern – In 24SFF/12LFF/8LFF chassis, only slot 1 can support it and under
ambient temperature of 30C. – If the Max CPU power is lower than 240W, the
supported ambient temp. is 30C – If the Max CPU power is higher than 240W, the
supported ambient temp. is 25C
P58232-B21
P47844-B21 P47845-B21 P47846-B21 P40548-B21 P47847-B21
P47837-B21 P40570-B21 P47838-B21 P47839-B21 P47840-B21
P41400-B21 P41401-B21 P41398-B21 P41399-B21 P42128-B21 P42132-B21 P42120-B21
P42124-B21 P41404-B21 P41405-B21 P41402-B21 P41403-B21
878783-B21
Page 40
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
– This kit requires a PCIe slot and supports up to two M.2 SSDs which should
be the same SSD SKUs
Read Intensive – M.2 – Solid State Drives
HPE 240GB SATA 6G Read Intensive M.2 Multi Vendor SSD HPE 480GB SATA 6G Read
Intensive M.2 Multi Vendor SSD
Hard Drive Blank Kits
HPE Gen9 LFF HDD Spade Blank Kit HPE Small Form Factor Hard Drive Blank Kit
HPE Tape Backup
For the complete range of tape drives, autoloaders, libraries and media see:
https://www.hpe.com/us/en/storage/storeever-tape-storage.html.
For hardware and software compatibility of Hewlett Packard Enterprise tape
backup products http://www.hpe.com/storage/BURAcompatibility
Hard Drive Kits
HPE DL38X Gen10 Plus 4LFF SAS/SATA Low Profile Mid Tray Drive Cage Kit Notes:
– Supported with both the 8 and 12 LFF model. – With this mid-tray only
single-wide (8.5-inch cards with connections or less) cards are supported.
Full
Length PCIe cards cannot be supported. – This requires Max Performance Fan kit
(P14608-B21 ). – Requires DIMM Blank kit (P07818-B21), if this option is
selected with processor 155W and above. – This mid tray drive cage kit
contains 1U high performance heat sink(s). Please note this is not the same
heat sink as included in the High Performance Heat Sink Kit (P14610-B21) HPE
ProLiant DL385 Gen10 Plus v2 4LFF SAS/SATA LP Drive Cage Kit Notes: –
Supported with both the 8 and 12 LFF model. – With this mid-tray only single-
wide (8.5-inch cards with connections or less) cards are supported. Full
Length PCIe cards cannot be supported. – This requires Max Performance Fan kit
(P14608-B21 ). – Requires DIMM Blank kit (P07818-B21), if this option is
selected with processor 155W and above. – This mid tray drive cage kit
contains 1U high performance heat sink(s). Please note this is not the same
heat sink as included in the High Performance Heat Sink Kit (P14610-B21) –
When this Mid Tray is selected with 8LFF CTO Server and no other controllers
selected then 2P must be
selected. HPE ProLiant DL385 Gen10 Plus v2 8SFF x1 U.3 BC Mid Tray Basic Drive
Cage Kit Notes: – Supported with both the 8 and 24 SFF model. – With this mid-
tray only single-wide (8.5-inch cards with connections or less) cards are
supported. Full
Length PCIe cards cannot be supported. – This requires Max Performance Fan kit
(P14608-B21 ). – Requires DIMM Blank kit (P07818-B21), if this option is
selected with processor 155W and above. – This mid tray drive cage kit
contains 1U high performance heat sink(s). Please note this is not the same
heat sink as included in the High Performance Heat Sink Kit (P14610-B21) HPE
ProLiant DL385 Gen10 Plus v2 8SFF x4 U.3 BC Mid Tray Premium Drive Cage Kit
Notes: – Supported with both the 8 and 24 SFF model.
P47817-B21 P47818-B21 807878-B21 666987-B21
P14503-B21
P55517-B21
P39600-B21
P38847-B21
Page 41
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
– With this mid-tray only single-wide (8.5-inch cards with connections or
less) cards are supported. Full Length PCIe cards cannot be supported.
– This requires Max Performance Fan kit (P14608-B21 ). – Requires DIMM Blank
kit (P07818-B21), if this option is selected with processor 155W and above. –
This mid tray drive cage kit contains 1U high performance heat sink(s). Please
note this is not the same
heat sink as included in the High Performance Heat Sink Kit (P14610-B21)
HPE ProLiant DL38X Gen10 Plus 2LFF Primary Riser Cage Kit
Notes: – Supported only on 8 LFF & 12 LFF models. – This option occupies
primary riser slot. – When P14579-B21 and P14580-B21 are selected. Double-wide
GPUs cannot be selected – When P14579-B21 is selected, maximum 1x double-wide
GPU can be supported – When P14579-B21 is selected, HPE DL38X Gen10+ Slot1 x16
Slot2/3 Kit (P14600-B21) CANNOT be
selected
HPE ProLiant DL38x Gen10 Plus 2LFF UBM to Tri-Mode LP Primary Riser Backplane
Kit
Notes: – Supported only on 8 LFF & 12 LFF models. – This option occupies
primary riser slot. – This 2LFF Drive cage needs support of trimode
controllers from the following list:
HPE MR416i-p Gen10+ Controller HPE MR416i-a Gen10+ Controller HPE MR216i-p
Gen10+ Controller HPE MR216i-a Gen10+ Controller – When this is selected.
Double-wide GPUs cannot be selected – When this is selected, maximum 1x
double-wide GPU can be supported – When this is selected, HPE DL38X Gen10+
Slot1 x16 Slot2/3 Kit (P14600-B21) CANNOT be selected HPE ProLiant DL38X Gen10
Plus 2LFF Tertiary Riser Cage Kit
Notes: – Supported only on 8 LFF & 12 LFF Models. – This option occupies
secondary and tertiary riser slots. – When P14579-B21 and P14580-B21 are
selected. Double-wide GPUs cannot be selected – When P14580-B21 is selected,
maximum 1x double-wide GPU can be supported – This option (P14580-B21) CAN NOT
be selected when HPE DL38X Gen10+ Slot1 x16 Slot2/3 Kit
(P14600-B21) Qty is 2
HPE ProLiant DL38x Gen10 Plus 2LFF UBM to Tri-Mode LP Tertiary Riser Backplane
Kit
Notes: – Supported only on 8 LFF & 12 LFF Models. – This option occupies
secondary and tertiary riser slots. – This 2LFF Drive cage needs support of
trimode controllers from the following list:
HPE MR416i-p Gen10+ Controller HPE MR416i-a Gen10+ Controller HPE MR216i-p
Gen10+ Controller HPE MR216i-a Gen10+ Controller – When this is selected.
Double-wide GPUs cannot be selected – When this is selected, maximum 1x
double-wide GPU can be supported – This option CANNOT be selected when HPE
DL38X Gen10+ Slot1 x16 Slot2/3 Kit (P14600-B21) Qty is 2
P14579-B21 P55518-B21
P14580-B21 P55519-B21
Page 42
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
HPE ProLiant DL38X Gen10 Plus 2SFF x4 Tri-Mode 24G U.3 BC Front/Tertiary Drive
Cage Kit
Notes: – This option can be used with all CTO Servers. – Max Qty=2, allowed on
8 SFF model; Max Qty=1, allowed on 8 LFF, 12 LFF and 24 SFF models. – Only 1
drive cage can be ordered with 12 LFF and 24 SFF models. – 8SFF Model with 2
drive cages, requires Universal Media Bay. – When Qty=2, HPE DL38X Gen10+
MiniSAS 3POS Cbl (P14605-B21) must be selected. – When supported in front,
only SATA/NVMe. When supported in rear, can support SAS/SATA/NVMe. – When
supported in rear with NVMe. Only 1 NVMe drive can be supported and must be
lower or equal to
10W. – When this drive cage is installed in rear and P26924-B21 in front
within a 8LFF CTO server, and no tri-
mode controller or NVMe bundle kits are ordered, max=3 NVMe drives can be
supported as direct attach – When this drive cage is installed in rear and
another P26922-B21 in front with Universal Media Bay within
a 8SFF CTO server, and no tri-mode controller or NVMe bundle kits are ordered,
max=3 NVMe drives can be supported as direct attach
HPE ProLiant DL385 Gen10 Plus v2 2SFF 4x U.3 Premium Secondary Riser Kit
Notes: – This 2SFF drive cage kit can support either NVMe, SAS or SATA type of
drives in front or rear. – This drive cage occupies Secondary slot therefore
no other secondary riser can be selected. Double-wide
GPU cannot be installed on this riser. – When this option is selected,
Tertiary riser cannot be selected. – When supported with NVMe. Only 1 NVMe
drive can be supported and must be lower or equal to 10W. – When this drive
cage is installed in rear and P26924-B21 in front within a 8LFF CTO server,
and no tri-
mode controller or NVMe bundle kits are ordered, max=3 NVMe drives can be
supported as direct attach – When this drive cage is installed in rear and
P26922-B21 in front with Universal Media Bay within a 8SFF
CTO server, and no tri-mode controller or NVMe bundle kits are ordered, max=3
NVMe drives can be supported as direct attach
HPE ProLiant DL300 Gen10 Plus 2U 2SFF x4 Tri-Mode 24G U.3 BC Side-by-Side
Drive Cage Kit
Notes: – This 2SFF drive cage kit can only support either NVMe or SATA type of
drives in front. No SAS drives can
be supported – This option can be only be used with 8 LFF model. – Only
SATA/NVMe drives can be supported. – When this drive cage is installed and
with a P26922-B21 in rear within a 8LFF CTO server, and no tri-
mode controller or NVMe bundle kits are ordered, max=3 NVMe drives can be
supported as direct attach
HPE ProLiant DL300 Gen10 Plus 2U 8SFF SAS/SATA 12G BC Front Bay 1/2 Drive Cage
Kit
Notes: – Supported only on 8 SFF Model. – Maximum up to 2 drive cages can be
selected. – The 24 SFF chassis doesn’t need to select this drive cage kit
since the chassis already includes 3x 8SFF
SAS/SATA drive cages.
P26922-B21
P35418-B21 P26924-B21 P26930-B21
Page 43
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
HPE ProLiant DL38x Gen10 Plus 8SFF SAS/SATA to Tri-Mode Controller Backplane
Kit Notes: – Supported only on 8 SFF Model. – Maximum up to 2 drive cages can
be selected. – This 8SFF SAS/SATA Drive cage needs trimode support from the
following list of controllers:
o HPE MR416i-p Gen10+ Controller
o HPE MR416i-a Gen10+ Controller
o HPE MR216i-p Gen10+ Controller
o HPE MR216i-a Gen10+ Controlle
HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 Tri-Mode 24G U.3 BC Front Drive Cage
Kit Notes: – Supported only on 8 SFF Model. – Maximum up to 3 drive cages can
be selected. – When this drive cage is selected, NVMe Bundle Kit (Min=1,
Max=1) or Tri-mode controller must be
selected. – When 8 SFF NVMe U.3 or U.2 drive cages is selected instead of
SAS/SATA drive cages, HPE DL38X
Gen10 8 SFF Front Cage Removal FIO Option (873763-B21) must be selected.
HPE ProLiant DL300 Gen10 Plus 2U 8SFF x1 Tri-Mode 24G U.3 BC Front Drive Cage
Kit
Notes: – Supported only on 8 SFF Model. – SAS/SATA controllers or Embedded
controller (SR100i) cannot support this drive cage. Only Tri-mode
controllers can support it. – When 8 SFF NVMe U.3 or U.2 drive cages is
selected instead of SAS/SATA drive cages, HPE DL38X
Gen10 8 SFF Front Cage Removal FIO Option (873763-B21) must be selected.
HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 NVMe 16G U.2 BC Front Drive Cage Kit
Notes: – Supported only on 8 SFF Model. – Maximum up to 3 drive cages can be
selected. – When this drive cage is selected, NVMe Bundle Kit (Min=1, Max=1)
or Tri-mode controller must be
selected. – SAS/SATA controllers or Embedded controller (SR100i) cannot
support this drive cage. Only Tri-mode
controllers can support it. – When 8 SFF NVMe U.3 or U.2 drive cages is
selected instead of SAS/SATA drive cages, HPE DL38X
Gen10 8 SFF Front Cage Removal FIO Option (873763-B21) must be selected.
Media Bay Kits
HPE DL38X Gen10 Plus Universal Media Bay Kit Notes: – The HPE DL385 Gen10 Plus
Universal Media bay provides front Display Port and 2xUSB 2.0; plus support
for 2x SFF front drives or 2 NVMe front drives and ODD support (Not included);
and can only be located in Box1 in either an 8 SFF or 8+8 SFF model. – This is
a 8SFF model option only. – This option cannot be ordered when HPE 8SFF Front
Remove SPEC Perf FIO (873763-B21) is NOT selected, and Qty=2 of following
options are selected : HPE DL300 Gen10 Plus 8SFF SAS/SATA Basic Carrier Drive
Cage Kit (P26930-B21), HPE DL300 Gen10 Plus 8SFF NVMe U.3 Premium Basic
Carrier Drive Cage Kit (P26931-B21), HPE DL300 Gen10 Plus 8SFF NVMe U.3 Basic
Basic Carrier Drive Cage Kit (P27194-B21), HPE DL300 Gen10 Plus 8SFF NVMe U.2
Premium Basic Carrier Drive Cage Kit (P26932B21) – When HPE Universal SATA 6G
AIC HHHL M.2 SSD Enablement Kit (878783-B21) is selected as well, no optical
drive device can be supported.
P55516-B21 P26931-B21 P27194-B21 P26932-B21
P14609-B21
Page 44
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
HPE Storage Options
Emulex Fibre Channel HBAs
HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter HPE SN1200E 16Gb
Dual Port Fibre Channel Host Bus Adapter HPE SN1600E 32Gb Dual Port Fibre
Channel Host Bus Adapter HPE SN1610E 32Gb 1-port Fibre Channel Host Bus
Adapter HPE SN1610E 32Gb 2-port Fibre Channel Host Bus Adapter HPE SN1700E
64Gb 1-port Fibre Channel Host Bus Adapter HPE SN1700E 64Gb 2-port Fibre
Channel Host Bus Adapter
QLogic Fibre Channel HBAs
HPE SN1100Q 16Gb Single Port Fibre Channel Host Bus Adapter HPE SN1100Q 16Gb
Dual Port Fibre Channel Host Bus Adapter HPE SN1610Q 32Gb 1-port Fibre Channel
Host Bus Adapter HPE SN1610Q 32Gb 2-port Fibre Channel Host Bus Adapter
NVMe Adapters
HPE DL385 Gen10 Plus 12Gb NVMe 1-port Adapter Notes: – This is PCIe re-timer
card to support direct attach NVMe. – Supports two x4 NVMe drives. – Maximum
q’ty of 4 can be supported. – Cannot be supported in the tertiary slot. HPE
DL385 Gen10 Plus 12Gb NVMe 2-port Adapter Notes: – This is PCIe re-timer card
to support direct attach NVMe. – Supports four x4 NVMe drives. – Maximum q’ty
of 4 can be supported. – Cannot be supported in the tertiary slot. – Q’ty of
two of this kit must be selected if HPE DL385 G10+ v2 24NVMe U.3 Bal FIO Kit
(P42085-B21) is
selected. – This card will only be supported on a x16 bus bandwidth PCIe slot.
Q0L13A Q0L14A Q0L12A R2J62A R2J63A R7N77A R7N78A
P9D93A P9D94A R2E08A R2E09A
P25526-B21
P25527-B21
HPE Smart IO
Requirements:
· One 3yr/4yr/5yr Silver or 3yr/4yr/5yr Platinum license must be purchased for every DSC-25 card in a server.
· 1yr Silver, 1yr Platinum, and 1yr Policy and Services Manager (PSM) licenses are reserved for renewals only.
· One Policy and Services Manager (PSM) license is required to manage up to 3,000 DSC-25 cards.
Pensando Distributed Services Card (DSC)
Pensando Distributed Services Platform DSC-25 Enterprise 10/25Gb 2-port SFP28 Card
P26966-B21
Notes: Each card instance requires one RTU license of Silver or Platinum software. In case of more than one
adapter, RTU licenses doesn’t need to be of the same part number.
Page 45
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Pensando DSP Silver Software Licenses
Pensando Distributed Services Platform Enterprise 1-year Renewal Subscription
24×7 Support E-RTU Pensando Distributed Services Platform Enterprise 3-year
Subscription 24×7 Support E-RTU Pensando Distributed Services Platform
Enterprise 4-year Subscription 24×7 Support E-RTU Pensando Distributed
Services Platform Enterprise 5-year Subscription 24×7 Support E-RTU
Pensando DSP Platinum Software Licenses
Pensando Distributed Services Platform Enterprise Pro 1-year Renewal
Subscription 24×7 Support E-RTU Pensando Distributed Services Platform
Enterprise Pro 3-year Subscription 24×7 Support E-RTU Pensando Distributed
Services Platform Enterprise Pro 4-year Subscription 24×7 Support E-RTU
Pensando Distributed Services Platform Enterprise Pro 5-year Subscription 24×7
Support E-RTU
HPE Networking
1 Gigabit Ethernet adapters
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE Broadcom BCM5719
Ethernet 1Gb 4-port BASE-T Adapter for HPE
10 Gigabit Ethernet adapters
Marvell QL41132HLRJ Ethernet 10Gb 2-port BASE-T Adapter for HPE Marvell
QL41132HLCU Ethernet 10Gb 2-port SFP+ Adapter for HPE Marvell QL41134HLCU
Ethernet 10Gb 4-port SFP+ Adapter for HPE Broadcom BCM57416 Ethernet 10Gb
2-port BASE-T Adapter for HPE Broadcom BCM57412 Ethernet 10Gb 2-port SFP+
Adapter for HPE Intel X710-DA2 Ethernet 10Gb 2-port SFP+ Adapter for HPE
10/25 Gigabit Ethernet adapters
Mellanox MCX512F-ACHT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Mellanox
MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Xilinx X2522
-25G-PLUS Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Marvell QL41232HLCU
Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Broadcom BCM57414 Ethernet
10/25Gb 2-port SFP28 Adapter for HPE Intel E810-XXVDA2 Ethernet 10/25Gb 2-port
SFP28 Adapter for HPE Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter
for HPE
100/200/400 Gigabit Ethernet adapters
HPE NV60100M 100Gb 2-port Storage Offload Adapter Intel E810-CQDA2 Ethernet
100Gb 2-port QSFP28 Adapter for HPE HPE 100Gb 1-port OP101 QSFP28 x16 PCIe
Gen3 with Intel Omni-Path Architecture Adapter HPE Ethernet 100Gb 1-port
QSFP28 PCIe3 x16 MCX515A-CCAT Adapter Mellanox MCX623106AS-CDAT Ethernet 100Gb
2-port QSFP56 Adapter for HPE Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port
QSFP56 Adapter for HPE HPE Slingshot SA210S Ethernet 200Gb 1-port PCIe NIC HPE
Slingshot 200Gb 1-port PCIe Adapter Notes: – 4-port adapters go only into Slot
- – A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter. – Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic
environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information: https://h20195.www2.hpe.com/v2/getpdf.aspx/A00002507ENW.pdf?
R6A06AAE R6A07AAE R6F68AAE R6A08AAE
R6A09AAE R6A10AAE R6F69AAE R6A11AAE
P21106-B21 P51178-B21
P08437-B21 P21933-B21 P10094-B21 P26253-B21 P26259-B21 P28787-B21
P13188-B21 P42044-B21 P21109-B21 P22702-B21 P26262-B21 P08443-B21 P08458-B21
R8M41A P21112-B21 829335-B21 P31246-B21 P25960-B21 P10180-B21
R4K46A R4K46B
Page 46
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Recommended System Ambient Temperature
System Config CPU Power
P21112-B21 P31246-B21
P25960-B21
P10180-B21
24SFF/ 8LFF <= 240W
25C
25C
25C
23C
16SFF
<= 240W
30C
30C
30C
30C
8SFF
<= 240W
30C
30C
30C
30C
24SFF/ 8LFF 240W < CPU <=280W 20C
20C
20C
18C
16SFF
240W < CPU <=280W 25C
25C
25C
25C
8SFF
240W < CPU <=280W 25C
25C
25C
25C
Other Restrictions
1. These cards are not supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit
4. Only supported on 1/4/5 PCIe slots 5. SAS4 drives should be treated as NVMe
Notes:When supported with AOC (Active Optical Cables), ambient temperature will follow below restrictions
Recommended System Ambient Temperature Supported with AOC Cables
System Config CPU Power
P21112-B21 P31246-B21
P25960-B21
P10180-B21
24SFF/ 8LFF <= 240W
22C
22C
22C
16SFF
<= 240W
27C
27C
27C
8SFF
<= 240W
27C
27C
27C
24SFF/ 8LFF 240W < CPU
17C
17C
17C
<=280W
16SFF
240W < CPU
22C
22C
22C
<=280W
8SFF
240W < CPU
22C
22C
22C
<=280W
Other Restrictions
1. These cards are not supported with 12LFF CTO config. 2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit 4. Only supported on 1/4/5 PCIe slots 5. SAS4 drives should be treated as NVMe
Notes: – The AOC cables are:
P28169-B21 HPE IB HDR 200Gb QSFP56 3m AOC P28169-B22 HPE IB HDR 200Gb QSFP56
5m AOC P28169-B23 HPE IB HDR 200Gb QSFP56 10m AOC P28169-B24 HPE IB HDR 200Gb
QSFP56 15m AOC P28169-B25 HPE IB HDR 200Gb QSFP56 20m AOC P28169-B26 HPE IB
HDR 200Gb QSFP56 30m AOC
OCP Adapters
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE Broadcom BCM5719
Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE Marvell QL41132HQCU Ethernet
10Gb 2-port SFP+ OCP3 Adapter for HPE Marvell QL41132HQRJ Ethernet 10Gb 2-port
BASE-T OCP3 Adapter for HPE Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3
Adapter for HPE Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for
HPE Intel X710-DA2 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE Broadcom
BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE
22C 27C 27C 17C 22C 22C
P08449-B21 P51181-B21 P08452-B21 P10103-B21 P10097-B21 P26256-B21 P28778-B21
P10115-B21
Page 47
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Mellanox MCX562A-ACAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Notes: When this OCP card is selected, the OCP Upgrade Cable Kit (P14603-B21) must be selected. Marvell QL41232HQCU Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Notes: – OCP adapters do not consume PCIe slot. – Only 1 slot is available for OCP adapters. – Only SFF OCP adapters below 35W can be supported Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE Notes: When this OCP card is selected, the OCP Upgrade Cable Kit (P14603-B21) must be selected. HPE DL385 Gen10 Plus OCP Upgrade Cable Kit
Recommended System Ambient Temperature
System Config
Memory DIMM Capacity
8LFF (SAS/SATA)
<= 64GB
16SFF (SAS/SATA)
<= 64GB
8SFF (SAS/SATA)
<= 64GB
8SFF (NVMe)
<= 64GB
16SFF (SAS/SATA)
<= 128GB
8SFF (SAS/SATA)
<= 128GB
P22767-B21 20C 25C 25C 20C 20C 20C
Other Restrictions
1. These cards are not supported with 12LFF/24SFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit
4. Not supported with memory DIMMs higher than 128GB 5. Not supported with CPUs higher than 240W
6. SAS4 drives should be treated as NVMe
HPE InfiniBand
HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI Adapter
HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI Adapter
Notes: When either one of these two OCP cards are selected, the OCP Upgrade Cable Kit (P14603-B21) must
be selected.
Recommended System Ambient Temperature
System Config
Memory DIMM Capacity P31323-B21 (Loma)
P31348-B21 (Loma)
8LFF (SAS/SATA)
<= 64GB
20C
20C
16SFF (SAS/SATA) <= 64GB
25C
25C
8SFF (SAS/SATA)
<= 64GB
25C
25C
8SFF (NVMe)
<= 64GB
20C
20C
16SFF (SAS/SATA) <= 128GB
20C
20C
8SFF (SAS/SATA)
<= 128GB
20C
20C
Other Restrictions 1. These cards are not supported with 12LFF/24SFF CTO config. 2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit 4. Not supported with memory DIMMs higher than 128GB 5. Not supported with CPUs more than 240W 6. SAS4 drives should be treated as NVMe
P42041-B21 P10112-B21 P10118-B21 P10106-B21 P22767-B21 P14603-B21
P31323-B21 P31348-B21
Page 48
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
HPE InfiniBand NDR200 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter
P45642-B21
Notes: This NIC card option currently only supports copper cables on DL385 Gen10 Plus v2. No optical cable
is supported yet
HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 MCX653105A-HDAT Adapter
P23664-B21
HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter
P31324-B21
HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter
P23665-B21
HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter
P23666-B21
Recommended System Ambient Temperature
System Config
CPU Power
P23664-B21 P31324-B21 P23665-B21 P23666-B21
24SFF/ 8LFF
<= 240W
30C
25C
30C
16SFF
<= 240W
30C
30C
30C
8SFF
<= 240W
30C
30C
30C
24SFF/ 8LFF
240W < CPU <=280W 25C
20C
25C
16SFF
240W < CPU <=280W 25C
25C
25C
8SFF
240W < CPU <=280W 25C
25C
25C
Other Restrictions
1. These cards are not supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit 4. Only supported on 1/4/5 PCIe slots
5. SAS4 drives should be treated as NVMe
HPE DL38X Gen10 Plus x16/x16 Slot 2/3 Secondary Riser Kit
Notes: Requires selection of a 2nd processor
HPE DL38X Gen10 Plus Slot1 x16 Adder for Slot2/3 Riser Kit
Notes: Required to add additional x16 PCIe Gen4 lanes for Primary/Secondary Riser3
HPE PCIe Workload Accelerator Options
HPE 1.6TB NVMe Gen4 x8 High Performance Mixed Use AIC HHHL PM1735 SSD
HPE 3.2TB NVMe Gen4 x8 High Performance Mixed Use AIC HHHL PM1735 SSD
30C 30C 30C 25C 25C 25C
P14590-B21 P14600-B21
P26934-B21 P26936-B21
Page 49
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
HPE Computation and Graphics Accelerator
Part number Card
Form QTY CPU
Factor per Supported
Server
R0W29C R9P49C
R4W72C R4B03C R4B02C
NVIDIA T4 Single 8
16GB
Wide
Computational
Accelerator for
HPE
NVIDIA A100 Double 3
80GB PCIe Wide
NonCEC
Computational
Accelerator for
HPE
AMD InstinctTM Double 3
MI100
Wide
Accelerator for
HPE
Xilinx Alveo Double 3
U250
Wide
Accelerator for
HPE
Xilinx Alveo Single 8
U50
Wide
Accelerator for
HPE
240W or below
280W or below
240W or below
240W or below
240W or below
R7E31C R9S38C R8T26C
NVIDIA A40 Double 3 PCIe 48GB Wide Graphics Accelerator for HPE NVIDIA A30 Double 3 PCIe 24GB Wide NonCEC Graphics Accelerator for HPE NVIDIA A16 Double 3 PCIe 64GB Wide NonCEC Graphics Accelerator for HPE
240W or below
280W or below
280W or below
Max Ambient Temperature
8/16SFF 24SFF
(SAS/SATA (SAS/SATA) or
only; no 8SFF/16SFF
SAS4)
(NVMe/SAS4)
35C (>30C 35C (>30C may
may throttle) throttle)
25C
Not support
8SFF=>25C Not support 16SFF=> 20C
25C
Not support
8SFF=>30C Not support
(passive
QSFP cable)
or 25C
(active QSFP
cable)
16SFF=>
25C
25C
Not support
35C (>30C 25C may throttle)
27C
23C
8LFF w/ 12LFF Power Switch
35C
25C
(>30C
may
throttle)
25C
Not
support
20C (Consult with HPE) Not support
Not support
Not support
Not
Not
support support
22C
Not
support
35C
25C
(>30C
may
throttle)
35C (>30C may throttle)
20C (Consult with HPE)
Page 50
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
NVIDIA T4 16GB Computational Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This x16
GPU can only installed in x16 electrical slot NVIDIA A2 16GB PCIe Non-CEC
Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This
option CANNOT be selected with following Mid Trays:
HPE DL38X Gen10+ 4LFF SAS/SATA LP Kit (P14503)
HPE DL385 G10+ v2 8SFF x4 U.3 BC Kit (P38847-B21)
HPE DL385 G10+ v2 8SFF x1 U.3 BC Kit (P39600-B21)
HPE DL38X G10+ 4LFF MID UBM2toTrimod Kit (P55517-B21) – This GPU CANNOT be
selected with 12LFF CTO Server – Certain thermal restrictions will occur when
this GPU is selected with SAS4 or NVMe drives on 8SFF or 24SFF
CTO Server. Please consult with your HPE reps for more details.
Xilinx Alveo U250 Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This GPU
requires Power Cable Kit (P39101-B21) to be also selected. One Power Cable Kit
can support
multiple (Max=3) GPUs – Double wide GPUs can not be installed in the same
riser where P14600-B21 is installed. Because the double
wide GPU heat sink will extend to the P14600-B21 slot. – When HPE Universal
SATA AIC HHHL M.2 SSD Kit (878783-B21) is selected and since it can only be
installed on a primary riser, a secondary riser must be selected to support a
DW GPU. – This x16 GPU can only installed in x16 electrical slot Xilinx Alveo
U50 Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This x16
GPU can only installed in x16 electrical slot NVIDIA A100 80GB PCIe Non-CEC
Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This GPU
requires Power Cable Kit (P39102-B21) to be also selected. One Power Cable Kit
can support
multiple (Max=3) GPUs – Double wide GPUs can not be installed in the same
riser where P14600-B21 is installed. Because the double
wide GPU heat sink will extend to the P14600-B21 slot. – When HPE Universal
SATA AIC HHHL M.2 SSD Kit (878783-B21) is selected and since it can only be
installed on a primary riser, a secondary riser must be selected to support a
DW GPU. – This x16 GPU can only installed in x16 electrical slot NVIDIA A40
48GB PCIe Non-CEC Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21).
R0W29C R9H23C
R4B03C R4B02C R9P49C R9S37C
Page 51
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
– This GPU requires Power Cable Kit (P39102-B21) to be also selected. One
Power Cable Kit can support multiple (Max=3) GPUs
– Double wide GPUs can not be installed in the same riser where P14600-B21 is
installed. Because the double wide GPU heat sink will extend to the P14600-B21
slot.
– When HPE Universal SATA AIC HHHL M.2 SSD Kit (878783-B21) is selected and
since it can only be installed on a primary riser, a secondary riser must be
selected to support a DW GPU.
– This x16 GPU can only installed in x16 electrical slot
NVIDIA A30 PCIe Non-CEC Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This GPU
requires Power Cable Kit (P39102-B21) to be also selected. One Power Cable Kit
can support
multiple (Max=3) GPUs – Double wide GPUs can not be installed in the same
riser where P14600-B21 is installed. Because the double
wide GPU heat sink will extend to the P14600-B21 slot. – When HPE Universal
SATA AIC HHHL M.2 SSD Kit (878783-B21) is selected and since it can only be
installed on a primary riser, a secondary riser must be selected to support a
DW GPU. – This x16 GPU can only installed in x16 electrical slot
NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE
Notes: – Requires selection of the Max Performance Fan Kit (P14608-B21). –
Requires selection of the High Performance Heat sink (P14610-B21). – This GPU
requires Power Cable Kit (P39102-B21) to be also selected. One Power Cable Kit
can support
multiple (Max=3) GPUs – Double wide GPUs can not be installed in the same
riser where P14600-B21 is installed. Because the double
wide GPU heat sink will extend to the P14600-B21 slot. – When HPE Universal
SATA AIC HHHL M.2 SSD Kit (878783-B21) is selected and since it can only be
installed on a primary riser, a secondary riser must be selected to support a
DW GPU. – This x16 GPU can only installed in x16 electrical slot
R9S38C R8T26C
HPE Graphic Cable Kits
HPE ProLiant DL300 Gen10 Plus GPU 2x 8-pin Cable Kit Notes: This Cable Kit is
for use with the AMD InstinctTM MI100 Accelerator HPE ProLiant DL300 Gen10
Plus GPU 8-pin Keyed Cable Kit Notes: This Cable Kit is for use with the
NVIDIA A100 PCIe 40GB Computational Accelerator
P39100-B21 P39102-B21
HPE Cooling Options
HPE ProLiant DL300 Gen10 Plus 2U Standard Fan Kit Notes: – The Standard Fan
Kit and the Maximum Performance Fan Kit cannot be selected together – CPUs
with lower than and equal to 155W, need to select this kit HPE DL38X Gen10
Plus Maximum Performance Fan Kit Notes: – This kit is required for specific
Ambient temperature environments,. – Max Performance fan kit consists of 6
fans, these will need to replace all the standard fans in the unit, and fill
all 6 fan cages. – The 12 LFF and 24 SFF models (including field upgrades to
24 SFF) will already include 6 Max Performance
fan kits.
P37042-B21 P14608-B21
Page 52
QuickSpecs
Core Options
HPE ProLiant DL385 Gen10 Plus v2 server
– The High Performance fan kit is needed to support GPU configurations; or ASHRAE operating environments. – For elevated ambient temperature support please see: http://www.hpe.com/servers/ashrae.
HPE Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes: Flex
Slot Platinum power supplies support power efficiency of up to 94% and include
a standard C-14 power inlet connector. HPE 800W Flex Slot Titanium Hot Plug
Low Halogen Power Supply Kit Notes: Flex Slot Titanium power supplies support
power efficiency of up to 96% and include a standard C-14 power inlet
connector. HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Flex Slot Platinum power supplies support power efficiency of up to 94%
and include a standard C-14 power inlet connector. HPE 800W Flex Slot -48VDC
Hot Plug Low Halogen Power Supply Kit Notes: Flex Slot -48VDC power supplies
support power efficiency of up to 94%
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit HPE 1600W
Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit HPE 1600W Flex Slot
-48VDC Hot Plug Power Supply Kit Notes: Flex Slot -48VDC power supplies
support power efficiency of up to 94%
HPE 1600W -48VDC Power Cable Lug Kit Notes: – P36877-B21 is to be used with
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit – Only one power cable
lug
References
- HPE GreenLake
- HPE Power Advisor
- hpe.com/servers/ahsv
- hpe.com/servers/ashrae
- hpe.com/storage/BURAcompatibility
- KVM Switches | HPE Store US
- HPE GreenLake
- Server memory population rules for HPE ProLiant Gen10 and Gen10 Plus servers with AMD EPYC 7002 and 7003-series processors technical white paper
- HPE DDR4 SmartMemory
- One Config Simple (OCS)
- One Config Simple (OCS)
- support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00118986en_us
- Red Hat Enterprise Linux Certification and Support | Hewlett Packard Enterprise
- AMD EPYC™ Server Processors | AMD
- Server memory population rules for HPE ProLiant Gen10 and Gen10 Plus servers with AMD EPYC 7002 and 7003-series processors technical white paper
- Contact HPE | Live Sales Chat | Hewlett Packard Enterprise
- HPE Smart Update Manager: Server Firmware & Driver Updates | HPE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>