Nature s Generator NGPHAUS Powerhouse Gold Plus SE System Instruction Manual
- June 10, 2024
- NATURE S GENERATOR
Table of Contents
NGPHAUS Powerhouse Gold Plus SE System
Nature’s Generator Powerhouse
User Manual
INPUT SOLAR INPUT
OUTPUT
QC3.0
TYPE-C
WIND INPUT
DC 12V
48V
MAIN POWER ON OFF
AC CHARGE
INPUT GRID SOLAR WIND kw
BAT
LOAD
V BATTERY
OUTPUT LOAD kw
AC USB
DC
AC OUTPUT
ON OFF
LINE 1 and 2 MAX 7200 WATTS TOTAL
240V
LINE 1
MAX 3600 WATTS TOTAL 120V
LINE 2
MAX 3600 WATTS TOTAL 120V
Nature’s Generator Powerhouse
Contents
Important Safety Instrucons
1
Warning
1
Cauon
2
Introducon
3
Unpack Your Nature’s Generator Powerhouse
3
Get to Know Your Nature’s Generator Powerhouse
4
Using Your Nature’s Generator Powerhouse
8
How to Assemble Your Nature’s Generator Powerhouse
8
How to Recharge Your Nature’s Generator Powerhouse
9
How to Use Your Nature’s Generator Powerhouse
11
How to Expand the Capacity of Your Nature’s Generator Powerhouse
11
How to Maintain and Store Your Nature’s Generator Powerhouse
12
Troubleshoong
12
Technical Specificaons
14
Limited Warranty
15
Important Safety Instructions 1. Read these instrucons. 2. Keep this user
manual in a safe and accessible place. 3. Take note of all warnings. 4. Follow
all instrucons. 5. Do not use this apparatus near water. 6. Do not block any
venlaon openings. 7. Do not use near flammable gases or fumes or other
apparatus that produce a large amount of heat. 8. Only use
aachments/accessories approved by the manufacturer. 9. Only use with the
wheels and handles approved by manufacturer, or sold with product. Use
cauously when moving with the wheels and handles to avoid p-over injury. 10.
Refer all servicing to qualified service personnel. Servicing is required when
the equipment
has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the equipment, the
equipment has been exposed to rain or moisture, has been dropped or does not
operate normally. 11. The equipment should not be exposed to dripping or
splashing, and no objects filled with liquids, such as drinking glasses or
vases, should be placed on the equipment.
Warning
Electric Shock Hazard Keep away from children. Nature’s Generator Powerhouse
generates the same potenally lethal AC power as a normal household wall
outlet. To reduce the risk of fire or electric shock, do not remove any cover
or expose the device to rain or moisture. Do not insert foreign objects into
the AC outlets or the venlaon holes.
Explosion Hazard Do not burn or incinerate this item. This item may explode,
causing property damage or personal injury. Do not use near flammable gases or
fumes or other apparatus that produces large amounts of heat.
Lightning Hazard For added protecon for your device during a lightning storm,
unplug it from the power outlet and disconnect the cables. This helps to
prevent property damage and personal injury from lightning and power line
surges.
Energy and Burn Hazard Nature’s Generator Powerhouse has sealed lead acid
baeries, which can present a risk of burn or fire hazard from high current
because of short-circuit.
1
Visit Naturesgenerator.com for More Information
Replacement Parts When replacement parts are required, make sure that the
service technician uses replacement parts specified by the manufacturer that
have the same characteriscs as the original part. Unauthorized substuons may
result in fire, electric shock, personal injury, or other hazards.
Caution Damage Requiring Service Stop using the Nature’s Generator Powerhouse
and refer servicing to qualified service personnel under the following
condions: · If liquid has been spilled or objects have fallen into your
Nature’s Generator Powerhouse. · If your Nature’s Generator Powerhouse has
been exposed to rain or water. · If your Nature’s Generator Powerhouse has
been dropped or damaged in any way. · When your Nature’s Generator Powerhouse
exhibits a disnct change in performance.
Cold Weather Cold temperatures can impact Nature’s Generator Powerhouse
performance. If you are in area that will be consistently below freezing, we
recommend keeping your Nature’s Generator Powerhouse in an insulated locaon
and connected to solar panels.
Recycling and Disposal Your Nature’s Generator Powerhouse may contain
materials that are regulated for environmental reasons.
Your Nature’s Generator Powerhouse also contains materials that can be
recycled and reused. To help protect the environment, contact your local
authories for informaon about disposal or recycling and about finding a
recycler in your area before you dispose of your Nature’s Generator
Powerhouse.
Safety Check Aer compleng any service or repair to this device, ask the
service technician to perform roune safety checks to determine that your
Nature’s Generator Powerhouse is in correct operang condion.
Servicing These servicing instrucons are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operang instrucons unless you are
qualified to do so.
Visit Naturesgenerator.com for More Information
2
Introduction Congratulaons on your new Nature’s Generator Powerhouse, a state-
of-art generator that provides reliable power for emergencies, off grid
living, or wherever power is needed. Unpacking Your Nature’s Generator
Powerhouse 1. Nature’s Generator Powerhouse Generator
2. Nature’s Generator Powerhouse Baery Storage
3. AC Power Cord
4. This User Guide
3
Visit Naturesgenerator.com for More Information
Get to Know Your Nature’s Generator Powerhouse Front Panel
Solar Input: To connect with Nature’s Generator Powerhouse Power Panels. This
Anderson port is designed to be used with up to 2000 was of solar power.
QC 3.0 Output: To provide QC 3.0 quick charge Type-C Output: To provide Type-c
charge. Main Power Switch: Turns on or off the main power to your generator
LCD Display: To show the informaon of the system. AC Output Switch: Turns on
or off all the AC outlets on the front of the generator.
Line 1 15Amp Outlet: Pure sine wave 120V/15A outlet from hot line 1.
Line 1 20Amp Outlet: Pure sine wave 120V/20A outlet from hot line 1.
Line 2 15Amp Outlet: Pure sine wave 120V/15A outlet from hot line 2.
Line 2 20Amp Outlet: Pure sine wave 120V/20A outlet from hot line 2.
Line 2 30Amp Outlet: Pure sine wave 120V/30A outlet from hot line 2.
Line 1 30Amp Outlet: Pure sine wave 120V/30A outlet from hot line 1.
Line 1 and 2 30Amp Outlet: Pure sine wave 240V/30A outlet from hot line 1 and
2. LCD Display Button: Press it to light up LCD display for 30 seconds. Keep
pressing it will show consequenal informaon on the LCD display. AC Charge
Light: Red means charging and green means charged. 12V Socket port: To provide
12V DC power for compable accessories.
12V Barrel port: To provide 12V DC output. Ideal for Nature’s Generator Power
Light.
48V Barrel port: To provide 48V DC output. Ideal for Nature’s Generator
Powerhouse Security Camera System. This port is always live!
Wind Input: To connect with Nature’s Generator Powerhouse Wind Turbine(s).
This Anderson port is designed to be used with up to 1000 was of wind power.
Visit Naturesgenerator.com for More Information
4
Back Panel
Grounding Terminal: To Ground Nature’s Generator Powerhouse. Some electrical
devices might require grounding before use. EXPANSION IN Port: Daisy chain
connector. It connects Nature’s
Generator Powerhouse Power Pod (sold separately) BATTERY GENERATOR Port: To
connect Nature’s Generator Powerhouse Baery Storage. Dry Contact Port: To
communicate with the other generator. AC Input: To connect to the wall outlet
using the included power cord.
5
Visit Naturesgenerator.com for More Information
How to Read the LCD Display
Input Grid: Displays the informaon of the input from grid.
Input Solar: Displays the informaon of the input form solar panel(s). Input
Wind: Displays the informaon of the input from wind turbine(s).
Input kw: Displays the input waage in w (was) or kw (kilo was). Input V:
Displays the input voltage in volts. Input A: Displays the input current in
amps. Input Hz: Displays the input frequency in hertz. Battery Bar: Indicates
the baery level in 8 increments. The bar is running when charging and stop
running when charged.
BAT V: Displays the baery voltage.
LOAD Bar: Indicates the power usage in 8 increments from boom to top. The
green bars mean light use. The yellow bars mean medium use. The red bars mean
heavy
use.
INPUT GRID SOLAR WIND
kw
BAT
LOAD
V
OUTPUT LOAD
kw
Output kw: Displays the output waage in w (was) or kw (kilo was) Output V:
Displays the output voltage in volts
OUTPUT %: Displays the output waage in %
BATTERY
OUTPUT Hz: Displays the output frequency in hertz.
DC Icon: It is illuminated when your Nature’s Generator Powerhouse is turned on and the DC port is working.
AC USB
DC Type-C Icon: It is illuminated
when your Nature’s Generator
Powerhouse is turned on and
the type-C port is working.
USB Icon: It is illuminated when your Nature’s
Generator Powerhouse is turned on and the
USB ports are working.
AC Outlet Icon: It is illuminated when the AC Output Switch is turned on.
FUSE Icon: It is illuminated when the fuse is blown.
Protection Icon: It is illuminated when your Nature’s Generator Powerhouse is protected.
Expansion (Chain Link) Icon: Indicates when your Nature’s Generator Powerhouse is daisy chained to the Nature’s Generator Powerhouse Power Pod by the expansion port. Visit NaturesGenerator.com for more informaon on the Nature’s Generator Powerhouse Power Pod.
Wind Input Icon: Indicates that your Nature’s Generator Powerhouse is recharged by Nature’s Generator Powerhouse Wind Turbine(s).
Solar Panel Icon: Indicates that your Nature’s Generator Powerhouse is recharged by Nature’s Generator Powerhouse Wind Turbine(s).
AC Input Icon: Indicates that your Nature’s Generator Powerhouse is recharged from AC power.
Visit Naturesgenerator.com for More Information
6
Protection Code
E02: The Nature’s Generator Powerhouse has been protected from high
temperature. E03: The Nature’s Generator Powerhouse has been protected from
high voltage of baeries. E04: The Nature’s Generator Powerhouse has been
protected from low voltage of baeries. E05: The Nature’s Generator Powerhouse
has been protected because of the short circuit of the
inverter. E06: The Nature’s Generator Powerhouse has been protected because
the output voltage from
the inverter is too high. E07: The Nature’s Generator Powerhouse has been
protected from over-loaded. E11: The Nature’s Generator Powerhouse has been
protected because the input from solar
panels is too high E12: The Nature’s Generator Powerhouse has been protected
because the input from the
wind turbines is too high E97: The Nature’s Generator Powerhouse has been
protected because the output voltage from the
inverter is too low. E98: Communicaon fails E99: The inverter fails to start
up.
7
Visit Naturesgenerator.com for More Information
Using Your Nature’s Generator Powerhouse
How to Assemble Your Nature’s Generator Powerhouse
1. Gently move your Nature’s Generator Powerhouse Baery Storage to the
desired locaon. Please be aware that two wheels have breaks. Release the
breaks before you start moving Nature’s Generator Powerhouse Baery Storage.
2. Team li Nature’s Generator Powerhouse Generator and place it on top of the
Nature’s Generator Powerhouse Baery Storage. Make sure they are aligned
Properly. If the ground is uneven or sloping, please add the shim(s) under the
wheels to keep your Nature’s Generator Powerhouse leveled.
3. Lock the latches on both sides. 4. Connect the expansion cable from
Nature’s Generator Powerhouse Baery Storage to the
Baery Generator Port on the back of Nature’s Generator Powerhouse Generator.
Generator
Expansion Cable
Baery Storage
Break Release Lever
Visit Naturesgenerator.com for More Information
8
How to Recharge Your Nature’s Generator Powerhouse
Recharging from Nature’s Generator Powerhouse Power Panels (sold separately):
- Place your Nature’s Generator Powerhouse Power Panels where they will get
as much direct
sunlight as possible. While direct sunlight is always preferred, the power panels will also send a small amount of charge to your Powerhouse during hazy or overcast sky condions. 2. Connect two Nature’s Generator Powerhouse Power Panels in series.
Posive
Nature’s Generator Powerhouse Power Panel
Negave Posive
MC4 Connectors
Negave
Nature’s Generator Powerhouse Power Panel
3. Connect the MC4 connectors of your Power Panel Cable to the remaining MC4 connectors on the Nature’s Generator Powerhouse Power Panels. Minimum two serial connected Nature’s Generator Powerhouse Power Panels are needed to recharge Nature’s Generator Powerhouse.
Posive
Nature’s Generator Powerhouse Power Panel
Negave Posive
MC4 Connectors
Negave
Nature’s Generator Powerhouse Power Panel
MC4 Connectors
Nature’s Generator Power Panel Cable
INPUT SOLAR INPUT
OUTPUT
QC3.0
TYPE-C
WIND INPUT
DC 12V
48V
MAIN POWER ON OFF
AC CHARGE
INPUT GRID SOLAR WIND kw
BAT
LOAD
V BATTERY
OUTPUT LOAD kw
AC USB
DC
AC OUTPUT
ON OFF
LINE 1 and 2 MAX 7200 WATTS TOTAL
240V
LINE 1
MAX 3600 WATTS TOTAL 120V
LINE 2
MAX 3600 WATTS TOTAL 120V
Nature’s Generator Powerhouse
9
Visit Naturesgenerator.com for More Information
4. Insert Power Panel Cable plug into Solar Input port on the front of your
Nature’s Generator
Powerhouse. You will know it is recharging when LCD display lights up, solar
panel icon is illuminated, and baery bar starts running. The baery bar will
stop running when the baery is full or there is not enough power from Nature’s
Generator Powerhouse Power Panels.
5. It usually takes about 8 to 15 hours to recharge the Nature’s Generator
Powerhouse if using two Nature’s Generator Powerhouse Power Panels. The
recharging me, of course, also depends on the temperature and the strength of
the sunlight.
6. To increase the recharging speed, you can connect the two serial connected
Nature’s Generator Powerhouse Power Panels in parallel connecon. The Solar
Input port can handle up to 2000 was of solar power. Visit
Naturesgenerator.com for more informaon about Nature’s Generator Powerhouse
Power Panels
Negave Posive
Negave
MC4 Connectors
Nature’s Generator Powerhouse Power Panel
Nature’s Generator Powerhouse Power Panel
Posive
Posive
Negave Posive
MC4 Connectors
Negave
Nature’s Generator Powerhouse Power Panel
Nature’s Generator Powerhouse Power Panel
Nature’s Generator Powerhouse Branch Cables
Nature’s Generator Power Panel Cable
INPUT SOLAR INPUT
OUTPUT
QC3.0
TYPE-C
WIND INPUT
DC 12V
48V
MAIN POWER ON OFF
AC CHARGE
INPUT GRID SOLAR WIND kw
BAT
LOAD
V BATTERY
OUTPUT LOAD kw
AC USB
DC
AC OUTPUT
ON OFF
LINE 1 and 2 MAX 7200 WATTS TOTAL
240V
LINE 1
MAX 3600 WATTS TOTAL 120V
LINE 2
MAX 3600 WATTS TOTAL 120V
Nature’s Generator Powerhouse
Visit Naturesgenerator.com for More Information
10
Recharging from the Nature’s Generator Powerhouse Wind Turbine (sold
separately):
1. Place your Nature’s Generator Powerhouse Wind Turbine where it will get
sufficient wind. 2. Follow the manual of Nature’s Generator Powerhouse Wind
Turbine to set up the wind turbine. 3. Insert the wind turbine cable connector
into Wind Input port on the front of your Nature’s
Generator Powerhouse. You will know it is recharging when LCD display lights
up, wind turbine icon is illuminated, and baery bar starts running. The baery
bar will stop running when the baery is full or there is not enough power from
wind turbine. The recharging speed depends on the strength of the wind. 4. To
increase the recharging speed, connect another Nature’s Generator Powerhouse
Wind Turbine by the dual charger controller. The Wind Input port can handle up
to 1000 was of wind power. Visit Naturesgenerator.com for more informaon about
Nature’s Generator Powerhouse Wind Turbine.
Recharging from AC Power
1. Insert the power cord to the AC Input Port on the back of the Nature’s
Generator Powerhouse. 2. Plug the other end of the power cord into the wall
outlet. You will know it is recharging when LCD
on the front of Nature’s Generator Powerhouse display lights up, AC input icon
is illuminated on the LCD display and baery bar starts running. The baery bar
stops running when the baery is full and the AC Input light changes from red
to green. Nature’s Generator Powerhouse AC Output will shutdown automacally
when it is be recharging from AC power.
How to Use Your Nature’s Generator Powerhouse
1. Press the Main Power Switch to turn on your Nature’s Generator Powerhouse.
DC and USB ports will be on automacally when the Main Power Switch is on.
2. Press the AC Output Switch to turn on the AC outlets. When not using the
AC outlets, make sure to turn off AC Output Switch to conserve power.
3. Plug in your devices for power.
How to Expand the Capacity of Your Nature’s Generator Powerhouse
You can extend the run me of your Nature’s Generator Powerhouse by connecng it
to the Nature’s Generator Powerhouse Power Pod (sold separately). Visit
naturesgenerator.com to purchase Nature’s Generator Powerhouse Power Pod. 1.
Locate the expansion cable on Nature’s Generator Powerhouse Power Pod and run
the
expansion cable to the back of the Nature’s Generator Powerhouse. 2. Locate
Expansion In Port on the back of your Nature’s Generator Powerhouse and open
the
cover. 3. Connect the expansion cable to the Expansion In port. 4. The
Expansion (Chain Link) Icon will be illuminated on the LCD display to indicate
it is connected.
You will experience an increased run me of 100% by adding one Nature’s
Generator Powerhouse Power Pod, 200% by adding two Nature’s Generator
Powerhouse Power Pods and 300% by adding three Nature’s Generator Powerhouse
Power Pods.
11
Visit Naturesgenerator.com for More Information
How to Maintain and Store Your Nature’s Generator Powerhouse
Turn off the main switch and AC switch when your Nature’s Generator Powerhouse
is not in use. Recharge your Nature’s Generator Powerhouse once every four
months and store it in a venlated, cool and dry locaon. This keeps the baery
healthy and prolongs its life. Failure to maintain Nature’s Generator
Powerhouse by these steps can result in baery damage which will void the
product warranty. Clean your Nature’s Generator Powerhouse with a so, lint-
free cloth. If your Nature’s Generator Powerhouse is very dirty, moisten a so,
lint-free cloth in a weak detergent soluon, squeeze the excess moisture from
the cloth, then wipe Nature’s Generator Powerhouse with the cloth, followed by
a clean dry cloth to wipe down you Nature’s Generator Powerhouse.
Troubleshooting
My Nature’s Generator Powerhouse won’t charge when I connect my solar panel to
it.
Please follow these steps. 1. Make sure the solar panels are pointed directly
towards the sun. The most efficient power
generang posion is with solar panels facing south. . The solar panels may
produce lile or no power if they are posioned in the shade. 2. Check the cable
connecon on your Nature’s Generator Powerhouse and make sure it is properly
connected. 3. If the LCD lights up but the baery bar is not running, it means
the solar panels do not have high enough voltage to recharge the Nature’s
Generator Powerhouse or the Nature’s Generator Powerhouse has been fully
recharged by the solar panels.
My Nature’s Generator Powerhouse Power Pod won’t charge when I connect my wind
turbine to it.
Please follow these steps. 1. If you are not using Nature’s Generator
Powerhouse Wind Turbine, make sure the wind turbine
has similar characteriscs. 2. Make sure there is sufficient wind that spins
the wind turbine fast enough. The wind turbine must
spin fast enough to generate higher voltage than Nature’s Generator Powerhouse
Power Pod before the wind turbine can charge Nature’s Generator Powerhouse
Power Pod. 3. Check the cable connecon on your Nature’s Generator Powerhouse
Power Pod and make sure it is properly connected. 4. If baery level LEDs light
up, but are not running, it means the wind turbine does not have high enough
voltage to recharge the Nature’s Generator Powerhouse Power Pod.
Visit Naturesgenerator.com for More Information
12
My AC device(s) are not powering up from my Nature’s Generator Powerhouse.
Please follow these steps: 1. Verify your device is suitable for use with your
Nature’s Generator Powerhouse. The Nature’s
Generator Powerhouse Line 1 and 2 outlet works only with 240V AC 30A maximum.
(7200 was). Line 1 or Line 2 outlets work only with 120V AC 30A maximum (3600
was)Some devices might require grounding`before they can be used. Ground
Nature’s Generator Powerhouse before power this type of devices. 2. Make sure
the Main Power Switch is turned on. 3. Check the baery bar. If there are four
bars or less, recharge your Nature’s Generator Powerhouse. Some AC device
draws large amounts of power when starng up. It is recommended to recharge
your Nature’s Generator Powerhouse full before heavy use. 4. Make sure the AC
Output Switch is turned on. The AC outlet light should be green. 5. If LED
light is red, please check FUSE icon, Protecon icon and protecon code(s) on
the LCD display.
My Nature’s Generator Powerhouse battery drains fast.
Please follow these steps. 1. Check the waage of your AC device(s). Some
devices like a hair dryer, microwave or vacuum
draw large amounts of power and thus the baery drains fast. Please always
monitor the waage output informaon on the LCD display. 2. When your AC device
is not in use, turn off AC outlets of your Nature’s Generator Powerhouse to
conserve power. The AC outlets consume a considerable amount of power while
being in standby mode. 3. When Nature’s Generator is not in use, turn off the
Main Power Switch to eliminate unnecessary baery drainage by turning off the
LCD display and USB ports.
13
Visit Naturesgenerator.com for More Information
Technical Specifications
Battery:
Type: AGM Sealed Lead Acid Capacity: 48V 100Ah (4800Wh) Self-discharge:
Recommend to recharge every 4 months
Inverter:
Output Power: 7200 wa max Output voltage: 120V/240V Split Phase Output
frequency: 60Hz Output Sine Wave: Pure sine wave Output Phase: Split phase
Ports:
USB Output: QC 3.0 Type-C Output: PD3.0 12V Socket: 10A max 12V Port: 10A max
48V Port: 5A max Expansion Port: 175A max
Charges:
AC Charger: 1300W AC Charger Indicator: red (charging) and green (charged)
Solar Charger: 2000wa Wind Charger: 1000wa
General:
Dimensions: Power house : 28 x 18 x 19 inches (720466473mm) Power house
(with wheels): 28 x 18 x 22 inches (720466568mm)
Operang temperature: 32-104 °F (0-40 °C) Storage Temperature: 23111 °F (-545
°C) Weight: 434 lbs (197 kg)
Visit Naturesgenerator.com for More Information
14
Limited Warranty One Year Limited Warranty Natures Generator Inc. warrants to
you, the original purchaser of this new product, that the product shall be
free of defects in the original manufacture of the material or workmanship for
a period of one (1) year from the original date of your purchase of the
product (“Warranty Period”). This product must be purchased from an authorized
dealer and packaged with this warranty statement. This warranty does not cover
refurbished product.
What does this Warranty Cover? During the Warranty Period, if the original
manufacture of the material or workmanship of the product is determined to be
defecve by an authorized dealer, Natures Generator Inc. will (at its sole
opon): (1) repair the product with new or rebuilt parts; or (2) replace the
product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of
Nature’s Generator and are not returned to you. If service of products or
parts are required aer the Warranty Period expires, you must pay all labor and
parts charges. This warranty lasts as long as you own your product during the
Warranty Period. Warranty coverage terminates if you sell or otherwise
transfer the product.
How to Obtain Warranty Service? Please call
1-800-975-7909 Monday through Friday,
9:00AM to 5:00PM PST. You will be provided with a Return Merchandise
Authorizaon (RMA) number and return instrucons. Send product to:
Natures Generator Inc. 3130 Paseo Mercado Suite 106 Oxnard, CA 93036
Please include the RMA number prominently displayed on the shipping box and
include your name, phone number and address with the product inside the box.
Where is the Warranty Valid? This warranty is valid only to the original
purchaser of the product in North America (United States, Canada).
15
Visit Naturesgenerator.com for More Information
What does the Warranty not Cover?
This warranty does not cover: · Cosmec damage · Damage due to force majeure,
such as lightning strikes, fire, flood, etc.. · Accident · Misuse · Abuse ·
Negligence · Commercial use · Modificaon of any part of the product · Damage
due to incorrect operaon or maintenance · Connecon to an incorrect voltage
supply · Aempted repair by anyone other than a facility authorized by Natures
Generator Inc. to service the
product · Products sold as is or with all faults · Consumables, such as
baeries · Products where the factory applied serial number has been altered or
removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
NATURES GENERATOR INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST
BUSINESS OR LOST PROFITS. NATURES GENERATOR INC. PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD.
SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Natures Generator Inc: For customer service please call
1-800-975-7909 Natures Generator Inc.
3130 Paseo Mercado Suite 106 Oxnard, CA 93036
Visit Naturesgenerator.com for More Information
16
V1.0 ENGLISH 22-0627
5
6
Rubber Seal Ring
Step 5 Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it int position firmly to finish installation.
Connector Using Guide
Natures Generator Inc. Toll Free:
800-975-7909 Email:
support@naturesgenerator.com
When mounting your PoE Camera outdoors, you are suggested to install the
waterproof lid for it. You may follow the steps below for installation.
1 Ethernet Cable End
Waterproof Connector
Top Cover
Step 1 Thread the Ethernet cable through the top cover and then the waterproof
connector.
Ethernet Cable End
2
Rubber Seal Ring
Step 2 Put the rubber seal ring around the Ethernet cable between the top
cover and the waterproof connector.
NOTE: The rubber seal ring provided has been cut. If not, you may manually cut
it.
Ethernet Cable End 3
Rubber O-Ring
Step 3 Put on the rubber O-ring to the Ethernet port of the camera and plug
the Ethernet cable into the Ethernet port.
4
Waterproof Connector
Step 4 Align the waterproof connector with the Ethernet port, then twist it
clockwise to tighten the two parts.
If at any time you have questions about this product, or if you require
additional assistance, please do not hesitate to contact our Customer Support
line at 800-975-7909 or email us at
support@naturesgenerator.com
Nature’s Generator Security Camera System
User Manual
Natures Generator Inc. Toll Free:
800-975-7909 Email:
support@naturesgenerator.com V1.5
NVR AC Power Adapter x 1 NVR DC Power Adapter x 1
8
10
5ft Ethernet Cable x 1 59 ft Ethernet Cable x 4
POE PORTS
1
3
5
7
2
4
6
8
OUT
*Press for about 5 seconds to restore the device to factory settings.
1a. If you want to access the security camera system remotely, connect the LAN port to your router with an Ethernet cable.
POE PORTS
1
3
5
7
2
4
6
8
1b. If you want to operate the security camera system in a closed environment, do not connect the LAN port to your router.
POE PORTS
1
3
5
7
2
4
6
8
2. Connect the mouse to the USB port of the NVR.
POE PORTS
1
3
5
7
2
4
6
8
3. Connect the NVR to the monitor with a VGA or HDMI cable.
POE PORTS
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
4a. Connect the NVR to a power outlet and turn on power switch
1
3
5
7
2
4
6
8
4b. Connect the NVR to the 48V DC port on Nature’s Generator Powerhouse or Nature’s Generator Powerhouse Power Pod and turn on power switch. Do not use the AC ports on Nature’s Generator Powerhouse to save energy.
Scan the QR code to download smartlife APP and click “Add Device”.
Scan the QR code on the NVR to add it.
48V
5. Connect PoE cameras to PoE ports on the NVR.
1
3
5
7
2
4
6
8
Make sure the NVR is powered on correctly and works properly. “Auto search mode” requires all devices to work in the same WLAN.
UI
1. No Video Output on the Monitor
If there’s no video output on the monitor from Nature’s Generator NVR, please try the following solutions:
When connect the camera system without Internet, you can preview, playback or
change settings on monitor by using the mouse.
Use the smartlife APP to scan the code on the website: https://ipc-
us.ismartlife.me/login. (It is suggested to use Google Chrome browser) After
connecting the NVR to smartlife APP sucessfully, use the APP to scan the code
on the website to log into your account.
2. Remove Device from APP
Home page ¹Long press the NVR icon ¹ Click “Remove Device” ¹ Click “Confirm”
3. Share Device with Others from APP Home management:Me ¹ Home Management ¹
Create home ¹ Add Member after creating a home
4. Forget Passwords Press the reset button for about 8 seconds to restore the
device to factory settings.
5. Fail to Access the NVR
Your Nature’s Generator Security Camera System may contains the materials that
can be recycled and reused. To help protect the environment, contact your
local authorities for information about disposal or recycling and about
finding a recyclers in your area before you dispose of your Nature’s Generator
Security Camera Systems.
This product comes with 1 year limited warranty that is valid only if
purchased from Natures Generator Inc or other authorized resellers.
We hope that you enjoy your new purchase. But if you are not satisfied with
the product and plan to return it, to protect your privacy, we strongly
suggest that you can format the HDD in NVR and remove the device from APP.
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at naturesgenerator.com. Keep it out of reach of children.
By using the Product Software that is embedded on the naturesgen -erator, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Natures Generator Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>