Magic Clean MCLW14WI Top Load Washer Instruction Manual
- June 10, 2024
- MAGIC CLEAN
Table of Contents
- Magic Clean MCLW14WI Top Load Washer
- Product Information
- Product Usage Instructions
- APPLIANCE SAFETY
- IMPORTANT SAFEGUIDES
- HELP US HELP YOU
- IF YOU NEED SERVICE
- IMPORTANT SAFETY INSTRUCTIONS
- INSTALLATION INSTRUCTIONS
- CONTROL PANEL
- OPERATING YOUR PORTABLE WASHER
- OPERATING INSTRUCTIONS
- CARE AND MAINTENANCE
- PROBLEMS WITH YOUR PORTABLE WASHER?
- TROUBLESHOOTING GUIDE
- Registration Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Magic Clean MCLW14WI Top Load Washer
Product Information
The MCLW14WI is a portable washer manufactured by Magic Clean. The product is designed to provide convenience and flexibility to = users who need a washing machine but have limited space. It features a compact design that allows it to fit in small spaces and has a capacity of up to 1.4 cubic feet. The product has several safety features, including a safety alert symbol that warns users of potential hazards, and a Prop 65 warning for California residents about cancer and reproductive harm. Additionally, the product comes with an instruction manual that provides important safety messages and precautions for users to follow. The product is easy to install and comes with an installation guide. Users are advised to position and install the washer as described in the manual to reduce the risk of fire, electrical shock, or injury when using the appliance. For assistance with the product, users can contact Magic Clean customer service at 800-220-5570. The product comes with a warranty period, and users are advised to keep proof of purchase date and model and serial numbers for correspondence or service calls concerning the washer.
Product Usage Instructions
Before using the MCLW14WI portable washer, users are advised to
read and follow all safety rules and operating instructions
provided in the instruction manual. The following are basic
precautions users should follow when using the washer:
-
Position and install the washer as described in the manual to
reduce the risk of fire, electrical shock, or injury when using the
appliance. -
Save the instructions manual for future reference and keep it handy to answer any questions that may arise during usage.
-
Write down the model and serial numbers found on the rear outside wall of the portable washer and keep them for correspondence or service calls concerning the washer.
-
Check the Troubleshooting Guide in the manual before calling for service. It lists causes of minor operating problems that users can correct themselves.
-
If users need service, they can contact Magic Clean customer service at 800-220-5570. If not pleased with the service received, users can write to Customer Service MAGIC CLEAN 3265 Meridian Pkwy # 114 Weston, FL 33331 USA, with all the details, including their telephone number.
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
DANGER: Danger means that failure to heed this safety statement may
result in severe personal injury or death.
WARNING: Warning means that failure to heed this safety statement may
result in extensive product damage, serious personal injury, or death.
CAUTION: Caution means that failure to heed this safety statement may
result in minor or moderate personal injury, or property or equipment damage.
All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:
DANGER
- Plug into a grounded 3-prong outlet, do not remove the grounding prong, do not use an adapter, and do not use an extension cord.
- Replace all panels before operating.
- It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
- Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
- Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
- Do not connect or disconnect the electric plug when your hands are wet.
- Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.
- Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.
WARNING
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
- Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
- To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.
- The appliance should not be located next to ovens, grills or other sources of high heat.
- The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
- Do not kink or pinch the power supply cord of appliance.
- The fuse (or circuit breaker) size should be 15 amperes.
- It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
- Never allow children to operate, play with or crawl inside the appliance.
- Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.
- Do not use this apparatus for other than its intended purpose.
HELP US HELP YOU
Read this guide carefully.
- It is intended to help you operate and maintain your new portable washer properly.
- Keep it handy to answer your questions.
- If you don’t understand something or you need more assistance, please call:
- MAGIC CLEAN Customer Service 800-220-5570
- Keep proof of the original purchase date (such as your sales slip) with this guide to establish the warranty period.
Write down the model and serial numbers:
- You’ll find them on a plate located on the rear outside wall of the portable washer.
- Please write these numbers here:
- Date of Purchase
- Model Number
- Serial Number
- Use these numbers in any correspondence or service calls concerning your portable washer.
- If you received a damaged portable washer, immediately contact the dealer (or builder) that sold you the portable washer.
- Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We’re proud of our service and want you to be pleased. If for some reason you
are not happy with the service you receive, here are some steps to follow for
further assistance.
FIRST, contact the people who serviced your portable washer. Explain why you
are not pleased. In most cases, this will solve the problem. NEXT, if you are
still not pleased, write all the details, including your telephone number, and
send it to:
- Customer Service
- MAGIC CLEAN
- 3265 Meridian Pkwy # 114
- Weston, FL 33331 USA
PARTS AND FEATURES:
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock, or injury when using your portable washer, follow these basic precautions:
-
Read all instructions before using the portable washer.
-
Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
-
Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
-
Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using a washing machine, turn on all hot-water faucets and let water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
-
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days.” -
Before you throw away your old portable washer: Take off the lid.
-
Never allow children to operate, play with, or crawl inside the portable washer. Close supervision of children is necessary when the washer is used near children.
-
Do not reach into the washer if the agitator or inner tub is moving.
-
Do not tamper with controls.
-
Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions.
-
Never clean portable washer parts with flammable fluids. The fumes can create a fire hazard or explosion.
-
Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may destroy the electrical insulation causing an electrical shock hazard.
-
Do not store, use gasoline, or any other flammable vapors and liquids in the vicinity of this or any other portable washer. The fumes can create a fire hazard or explosion.
-
If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. -Save these instructions-
WARNING
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities.
- This appliance should not be operated by those with a lack of experience or knowledge of its use or operation unless they have been given instructions concerning and/or are supervised during the use of the appliance by a person responsible for their safety.
- This appliance is not intended for use by children. To avoid any possible type of injury or damage to the unit and or personal property all children should be supervised to ensure they do not play with the appliance.
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR PORTABLE WASHER
- Remove the exterior and interior packing.
- You will need the following tools:
- Wrench
- Pliers
- Screwdriver
- Check to be sure you have all of the following parts:
- 2 Inlet Hose
- 2 Faucet Adapters
- 1 Water Inlet Cover
- 1 Drain Hose Assembly (Pre-Installed)
- Remove shipping brace. Note – It should be saved and used (to prevent damage to washer components) whenever washer is moved or transported to a new location.
- Clean the interior surface with lukewarm water using a soft cloth.
- Allow 2 inches of space between the back and sides of the appliance.
- Put your laundry into the washer evenly. Uneven laundry may cause noise or vibration.
- DO NOT use excessively hot water (122ºF / 50°C or more). Plastic parts may be deformed or damaged. Also, clothing may be deformed or bleached.
- Before washing, check all pockets. If nails or pins remain in pockets, they may damage the washer or clothes.
- Never splash water on the control panel.
- Plug the washer into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord.
- Any questions concerning power and/or grounding should be directed toward a certified electrician or an Authorized MAGIC CLEAN service center.
SELECTING A LOCATION
Before you install the portable washer, select a location with the following
characteristics:
- A hard-level surface (if the surface is uneven, see Adjusting The Adjustable Foot section on the next page).
- Away from direct sunlight. Direct sunlight may affect the acrylic coating, plastic and electrical components.
- Adequate ventilation.
- Away from sources of heat such as coal or gas. Make sure that the washing machine does not stand on its power cord.
- Ventilation openings must not be obstructed by carpeting when the portable washer is installed on a carpeted floor.
- It is recommended that you place your portable washer on a hard material floor such as tile, concrete, linoleum and to avoid if at all possible, placement on wooden floors or carpeted areas.
MOVING YOUR WASHER
To move your washer, tilt the unit back onto its rear rollers and push it
forward as shown in the figure.
CONNECTING THE WATER SUPPLY HOSE
The water supply hose must be connected to the washing machine at one end and
to the water faucet at the other. Do not stretch the water supply hose. If the
hose is too short and you do not wish to move the water faucet, replace the
hose with a longer, high-pressure hose. Select appropriate faucet as shown in
the figures below. If none of these faucets are available, use the faucet
adapter provided. The end of faucet spout should be longer than 10mm (0.4”),
or the connector cannot be fixed properly. Water leakage could develop
.
If you have both cold and hot water supplied, connect the inlet hoses by matching cold to cold and hot to hot.
SINK FAUCET CONNECTION
- For a normal kitchen sink tap only use the inlet hose with cold water inlet.
- Connect the inlet hose to the male hose thread adapter by turning it clockwise to be fixed tightly. Make sure to insert the rubber ring enclosed. Then connect tightly to your sink.
- Note: Some faucets may require you to also use the female hose thread adapter between the male adapter and your sink faucet as shown below. Make sure the rubber ring is inserted and connected to your sink.
If water leaks from faucet connection or washer connection, turn off water and
tighten fully using a wrench. Be careful not to over tighten and damage water
connection. Turn on water supply and make sure no leaks are present.
DISCONNECTING THE WATER SUPPLY HOSE
Dismantling the hose directly may cause water to splash due to the possible
high-water pressure in the hose, even after the faucet has been turned off.
Please take off the hose as per following steps, even if the faucet is closed:
- Turn off the faucet.
- Turn on the power and let the machine run for about 5 seconds then turn it off.
- Remove the connecting nuts from the faucet and washing machine.
Note: If the washing machine is frequently used, it is not necessary to
dismantle the inlet hose to avoid possible damage to the threads.
POSITIONING THE DRAIN HOSE
Since only up drainage is available, drain hose can be hung in the basin or
bathtub.
NOTE: The highest point of the drain hose must be in the height of 2.5 – 3.25
feet above floor level, otherwise, the washer cannot work normally.
ELECTRICAL CONNECTION
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
-
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.
-
Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. -
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
-
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord.
-
Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly
recommended that you do not use an extension cord with this appliance.
However, if you must use an extension cord it is absolutely necessary that it
be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a
grounding type plug and outlet and that the electrical rating of the cord be
115 volts and at least 10 amperes.
SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate.
These boards are very susceptible to power surges and could be damaged or
destroyed. If the appliance is going to be used in an area or if your
city/country is prone to power surges/outages; it is suggested that you use a
power surge protector for all electrical devices/appliances you use. The surge
protector that you select must have a surge block high enough to protect the
appliance it is connected to. If you have any questions regarding the type and
size of surge protector needed contact a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer-covered defect
and will void your product warranty.
CONTROL PANEL
1 | POWER ON / OFF BUTTON |
---|---|
2 | START / PAUSE BUTTON |
3 | LOAD SIZE SELECTOR BUTTON |
WATER TEMPERATURE SELECTION (PRESS AND HOLD FOR APPROXIMATELY 3 SECONDS)
4| PROGRAM SELECTOR BUTTON
DELAY START SELECTOR (PRESS AND HOLD FOR APPROXIMATELY 3 SECONDS)
DELAY START CAN BE PROGRAMMED FROM 2 – 24 HOURS
| CHILD LOCK FUNCTION
TO ACTIVATE: DURING THE WASH CYCLE PRESS AND HOLD THE LOAD SIZE AND PROGRAM BUTTONS FOR APPROXIMATELY 2 SECONDS.
TO DEACTIVATE PRESS AND HOLD THE LOAD SIZE AND PROGRAM BUTTONS FOR APPROXIMATELY 2 SECONDS OR SIMPLY PRESS THE POWER BUTTON.
WHEN ACTIVATED “CL” WILL FLASH ON AND OFF IN THE DISPLAY WINDOW
OPERATING YOUR PORTABLE WASHER
PREPARATION
BEFORE WASHING
Prepare the wash load. Mix large and small articles in a load to get the best
washing results. Drop articles loosely into the inner tub. Do not pack
articles in or wrap them. Articles should move freely through the wash water
for best cleaning results. Articles should rollover, sink and then reappear.
When washing very large articles, do not fill inner tub as full as with other
loads. The water level in your washer should fit the size of your wash load.
Small load will use lower water levels. There must be enough water in the
inner tub to allow articles to move and turn over freely. Overloading the
inner tub can result in poor washing and rinsing. Overloading may also cause
wrinkling and tearing of articles.
Make sure that you follow all manufacturer instructions for washing:
OPERATING INSTRUCTIONS
PRESS THE POWER BUTTON.
PRESS THE LOAD SIZE BUTTON.
Choose the appropriate water level according to the wash load quantity. (In the SPEED WASH program, the water level cannot be selected)
1 | SMALL |
---|---|
2 | MEDIUM DEFAULT |
3 | LARGE |
WATER TEMPERATURE CHOICE
Press and hold the load size button for approximately 3 seconds and, you can
choose from cold, warm, and/or hot water.
Indicator Light Shown | Description |
---|---|
C | Cold Water |
H | Hot Water |
CH | Warm Water |
NOTE: The washer will provide a cold rinse in all temperature settings.
PRESS THE PROGRAM SELECTION BUTTON.
Choose the desired function and then the corresponding indicator blink.
1 | NORMAL | 5 | SPIN ONLY |
---|---|---|---|
2 | COTTON DEFAULT | 6 | WHITES |
3 | GENTLE WASH | 7 | HEAVY SOIL |
4 | SPEED WASH | 8 | TUB CLEAN |
AUTOMATIC WASH PROGRAMS
Program
| Water Level| Wash
Time (Approx)
| Rinse Times| Final
Spin Time
| Total
Time (Approx)
| Delay
Start Option
---|---|---|---|---|---|---
Default
Setting
| Available
Settings
NORMAL| MEDIUM| S, M, L| 15| 1| 9| 33| YES
COTTON| MEDIUM| S, M, L| 11 – 15| 2| 7| 38 -42| YES
GENTLE| MEDIUM| S, M, L| 9 – 13| 2| 5| 34 – 38| YES
SPEED
WASH
| SMALL| S, M, L| 6 – 8| 1| 5| 21 – 25| YES
SPIN| –| –| –| –| 7| 7| NO
WHITES| MEDIUM| S, M, L| 9 -13| 2| 5| 32 – 36| YES
HEAVY
SOIL
| MEDIUM| S, M, L| 15 – 19| 2| 7| 42 – 46| YES
TUB
CLEAN
| LARGE| LARGE| 28| 1| 5| 43| NO
NOTE: All automatic wash programs include soak time.
To select one of the pre-programmed automatic wash cycles, follow the
instructions as shown below:
- Close the lid.
- Press the power button.
- Press the program button to select the appropriate program until the program number is shown in the display window. (Cotton is the default program)
- For routine/normal washing it is recommended to use the NORMAL program and only use the HEAVY SOIL setting for large loads or when washing items that are excessively soiled.
- Press the Load Size button to select the appropriate load size. (The default is 2 Medium).
- Press the START/PAUSE to start the cycle. And the LED display will show the remaining time of the entire course.
PRESS DOWN START/PAUSE BUTTON ONCE AND THE MACHINE WILL BEGIN OPERATION.
Please press this button to stop the normal operation, if it continues to
work, press it again.
Water level can be reset during the normal operation after pressing the PAUSE
button. If the higher water level is selected, the machine will operate after
refilling the water level selected.
FULLY AUTOMATIC – FUZZY LOGIC PROGRAM.
Your machine incorporates the fuzzy logic program, which will automatically
select the load size and select the cotton wash program.
Press the Power button.
Press the Start / Pause button, the tub will start to spin back and forth the
weigh the clothes in the tub and then will be operation.
The machine will work in the Cotton wash program as a default.
In the event the clothing being washed becomes unbalanced, the safety switch
will be activated, and the washing machine will automatically refill with
water to adjust the imbalance.
Note:
- Clothes easily discolored should be washed separately so as to prevent inter-dyeing.
- If you want to change a selected program, press the POWER button first to turn the unit off, then press the POWER button again to turn the unit back on, then press the
- Program button to select the new cycle before pushing START/PAUSE button.
- When the Rinse and Spin functions are ON, do not use detergent.
- If you want to drain the water during washing, press the POWER button first to turn the unit off, then press the POWER button again to turn the unit back on, then select the SPIN function. Press START/PAUSE button again to restart.
ADDING / REMOVING CLOTHING AFTER THE CYCLE HAS STARTED
Your washing machine is equipped with a safety system that will stop the
machine when the lid is opened during a wash cycle.
To add or remove clothing to/from a wash cycle follow the steps below:
- Open the lid, the machine will stop (E2 will flash in the display and a beep will sound).
- Add or remove the clothing as needed.
- Close the lid, the washing machine will continue the previous wash cycle.
DELAY START
- Your machine can be programmed to start at a later time, to activate the delay start program (2 – 24 hours) follow these steps:
- Press the Power button.
- Select the desired wash program by pressing the program button until the wash program number is shown in the display window.
- Press the load size button to select the size of laundry load to be washed.
- Hold the program button for approximately 3 seconds, “2” will be shown in the window, press the program button to select the desired start time.
- Press the START / PAUSE button to activate.
- The preset start time and ( • ) will flash in the display window. Once the delay time has elapsed, the washer will begin the pre-programmed wash cycle.
CARE AND MAINTENANCE
CLEANING YOUR PORTABLE WASHER
- Clean the surface of your portable washer regularly with soft fabric.
- Clean the inner tub regularly, especially immediately after starch or bleach operation.
- Clean the filter in the inlet valve or inlet hose regularly in order to prevent it from clogging.
- Clean the lint filter.
PROBLEMS WITH YOUR PORTABLE WASHER?
You can solve many common portable washer problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM | POSSIBLE CAUSE |
---|---|
Washer does not operate. | Not plugged in. |
The circuit breaker tripped or a blown fuse. The lid is not closed.
Make sure the water source is turned on.
No water or insufficient water supply.| The water source faucet is not turned on. The water source hose is frozen.
The water intake hose is bent.
The filter on the water intake hose is clogged.
The washing machine does not drain.| The drain hose is squashed or bent.
Washing machine vibrates or is too noisy.| Check to assure that the washer is
level.
The washing machine is touching another object. The laundry load is not balanced.
Washing machine does not spin.| The lid is not closed.
The washer is not on a level surface.
Display shows Error Code “E 0”
Description: Malfunction in the Water Supply Valve
| No water,
Water supply valve time-out, Water valve is clogged.
Display shows Error Code “E 3” Description: Unit is unbalanced.| Unit becomes
unbalanced during operation. Stop the unit, shift the load evenly, restart.
Display shows Error Code “E 1” Description: Malfunction of the Water Drain
pump.| Water drain pump malfunctioned.
Display shows Error Code “E 2”
Description: Top Lid has been opened during operation
| Close the top lid and press the START/PAUSE button to continue the wash cycle.
SERVICE FOR YOUR PORTABLE WASHER
We are proud of our customer service organization and the network of
professional service technicians that provide service on your MAGIC CLEAN
portable washers. With the purchase of your MAGIC CLEAN portable washer, you
can be confident that if you ever need additional information or assistance,
the MAGIC CLEAN Customer Service Team will be here for you. Just call us toll-
free.
MAGIC CLEAN CUSTOMER SERVICES
Product Information 800-323-5029|
Whatever your questions are about our products, help is available.
---|---
Part Orders 800-220-5570| You may order
parts and accessories that will be delivered directly to your home by personal
check, money order, Master Card, or Visa.
In-Home Repair Service 800-220-5570| An
MAGIC CLEAN authorized service center will provide expert repair service,
scheduled at a time that is convenient for you. Our trained servicers know
your portable washer inside and out.
YOUR MAGIC CLEAN WARRANTY| Staple your sales receipt here. Proof of original
purchase date is needed to obtain service under warranty
---|---
WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY
MAGIC CLEAN warrants that the product is free from defects in materials and/or workmanship for a period of twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless described in detail in the warranty document. For one year from the date of purchase by the original owner, MAGIC CLEAN will, at its option, repair or replace any part of the product which proves to be defective in material or workmanship under normal use. MAGIC CLEAN will provide you with a reasonably similar product that is either new or factory refurbished. During this period MAGIC CLEAN will provide all parts and labor necessary to correct such defects free of charge, so long as the product has been installed and operated in accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90 days. All MAGIC CLEAN appliances of 4.2 cubic feet capacity or less must be brought/sent to the
appliance service center for repair.
LIMITED FIVE-YEAR WARRANTY ON PLASTIC TUB
After one year and until five years from the date of purchase, MAGIC CLEAN will furnish a replacement plastic tub, for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of the consumer.
LIMITED SEVEN YEAR WARRANTY ON STAINLESS STEEL TUB
After one year and until seven years from the date of purchase, MAGIC CLEAN will furnish a replacement plastic tub, for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of the consumer.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of MAGIC CLEAN, including without limitation, one or more of the following:
· A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations.
· Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.
· Shipping and handling costs associated with the replacement of the unit.
· Repairs performed by unauthorized servicers.
· Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or any other acts of God.
| Failure of the product if it is used for other than it intended purpose.
The warranty does not apply outside the Continental USA.
Surcharges including but not limited to, any after hour, weekend, or holiday
service calls, tolls, ferry trip charges, or mileage expense for service calls
to remote areas.
In no event shall MAGIC CLEAN have any liability or responsibility whatsoever
for damage to surrounding property, including cabinetry, floors, ceilings, and
other structures and/or objects around the product. Also excluded from this
warranty are scratches, nicks, minor dents, and other cosmetic damages on
external surfaces and exposed parts; Products on which the serial numbers have
been altered, defaced or removed; service visits for customer education, or
visits where there is nothing wrong with the product; correction of
installation problems (you are solely responsible for any structure and
setting for the product, including all
electrical, plumbing and/or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
MAGIC CLEAN is under no obligation, at law or otherwise, to provide you with any concessions, including repairs, pro-rates, or product replacement, once this warranty has expired.
Warranty – Washing Machines
Registration Information
Thank you for purchasing this fine MAGIC CLEAN product. Please fill out this form and return it to the following address within 100 days from the date of purchase and receive these important benefits:
- MAGIC CLEAN.
- 3265 Meridian Pkwy # 114.
- Weston, Florida 33331
Protect your product:
We will keep the model number and date of purchase of your new MAGIC CLEAN product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your future needs.
-(detach here)
—
MAGIC CLEAN Registration Card
Name| | Model # Serial #
Address| | Date Purchased Store / Dealer Name
City| State| Zip| | E-mail Address
Area Code| Phone Number| | | Occupation
Did You Purchase An Additional Warranty| | As your Primary Residence, Do You:
Extended| | Own Rent
None| |
| | Your Age:
Reason for Choosing This MAGIC CLEAN Product:
Please indicate the most important factors
That influenced your decision to purchase this product:
| | under 18 18-25 £ 26-30
31-35 36-50 £ over 50 Marital Status:
Married Single
Price
Product Features
MAGIC CLEAN Reputation
Product Quality
Salesperson Recommendation
Other: _ __
Friend / Relative Recommendation
Warranty
Other:
| |
Is This Product Used In The:
Home Business
How Did You Learn About This Product:
Advertising
In-Store Demo
Personal Demo
Comments:| |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>