Celestial HB-18-6 H-Burner Kit Gas Fireplaces Instructions
- June 10, 2024
- CELESTIAL
Table of Contents
Celestial HB-18-6 H-Burner Kit Gas Fireplaces
Product Information
H-Burner Kit for Natural Gas Indoor Vented Fireplace
The H-Burner kit is designed to be used with natural gas for indoor vented fireplaces. It is important to turn off the gas valve before installing the kit and when the kit is not in use. The included damper clamp is an essential feature that should not be ignored as it allows ventilation for your fireplace while preventing the flue from being closed.
Instructions for Usage
- Before installation, ensure that the gas valve is shut off.
- Install the damper clamp before using the burner kit.
- When adding fire glass, put glass over the burner first, then add glass to the surrounding area in the fireplace. The depth of the glass above the burner should not exceed one inch (1).
- Fire glass is heat resistant for standard gas fireplaces under normal heat conditions. Never add wet fire glass and ensure that any glass is completely dried before burning.
- If cleaning is required, use a mixture of 50% water and 50% vinegar. Make sure to dry all components and glass pieces entirely before using the fireplace again.
SAFTEY INSTRUCTION
- The H-Burner kit is intended to be used with Natural Gas in an indoor vented fireplace. Please ensure the gas is shut off at the valve before installing this kit as well as when the kit is not in use. Do not use this burner kit without installing the damper clamp. The included damper clamp is an important feature as it prevents the flue from being closed and allows ventilation for your fireplace.
- When adding fire glass to your H Burner, add glass over the burner first, then the surrounding area in the fireplace. Fire glass can cover the H burner, but the depth of the glass above the burner should not exceed one inch (1”). Fire glass is heat resistant in standard gas fireplaces under normal heat conditions. Never add wet fire glass but ensure any glass is fully dried before burning.
- Should you need to clean your fireplace or fire glass, a 50/50 mix of water and vinegar can be used. But all components and glass pieces must be dried completely before using the fireplace again.
Read User Manual Online (PDF format)
Loading......