UniStar ATS2851 Bluetooth Dongle User Manual

UniStar ATS2851 Bluetooth Dongle

This Bluetooth dongle is a device that allows your computer or other device to connect to Bluetooth-enabled devices, such as speakers, headphones, and smartphones.

Product Information

• This device complies with part 15 of the FCC Rules.
• Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• The device complies with Industry Canada license-exempt RSS standard(s).
• The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
• This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure.
• This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.

Product Usage Instructions

Before using the Bluetooth dongle, please ensure that your computer or other device is compatible with Bluetooth technology. You can check your device’s specifications or user manual to confirm compatibility.

To use the Bluetooth dongle:

1. Insert the dongle into an available USB port on your computer or other device.
2. Follow the on-screen prompts to install any necessary drivers or software.
3. Turn on the Bluetooth-enabled device you want to connect to.
4. On your computer or other device, open the Bluetooth settings and search for available devices.
5. Select the device you want to connect to and follow the on-screen prompts to complete the connection.

Note:
To ensure compliance with FCC and Industry Canada regulations, do not make any changes or modifications to the device without explicit approval from the manufacturer.

Bluetooth Specification

1. Chip solution: torch core ATS2851
2. Bluetooth protocol: 5.3
3. 2MB/S high bandwidth, low loss data transmission
4. A2DP, AVCTP. AVCTP, AVRCP, ATT, GATT, BNEP.DID, DIS, DUN, GAP, GAVDP, HFP, HOGP, HIF, HIF S, IOP, L2CAP, OPP, PANU, RFCOMM, ScPP, SPP, SDP,
5. Frequency range: 2.4GHz-2.4835GHz
6. Effective distance > 20 meters
7. This product supports Windows 8.1/10/11 system without drive use, different systems’ use, installation, and pairing operations are slightly different
8. Due to the macOS system, macOS/iOS and other devices are not supported for the time being
9. This product can be connected to Bluetooth devices such as mouse/keyboard/gamepad/speaker/headphones/mobile phone/tablet and can connect up to 5 different types of devices at the same time.
10. Support mobile phone-computer mutual file transfer
11. Support mobile network sharing to the computer.
12. This product has an automatic memory function. After the first match is successful, it can be automatically reconnected after the subsequent boot, without reconfiguration.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

ISED Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.

• This equipment should be installed and operated with a minimum distance of 0cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>