PITTSBURGH 63712 8 Inch Digital Caliper Owner’s Manual
- June 10, 2024
- PITTSBURGH
Table of Contents
PITTSBURGH 63712 8 Inch Digital Caliper Owner’s Manual
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2017 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
WARNING
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Specifications
| Display Units | Inches & Millimeters |
|---|---|
| Accuracy | ±0.001″ (0.03mm) |
| Display | 0.0005″ (0.01mm) |
| Power Supply | SR44 Button Battery (Included) |
Important Safety Information
- CONTAINS BUTTON BATTERY. Keep out of your child’s reach. Discard button batteries carefully. Do not allow children to play with devices that contain button batteries. This product is not a toy.
- Wear ANSI-approved safety goggles during use.
- Keep work area clean and well lit.
- Do not operate when tired or when under the influence of alcohol, drugs or medication.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Components and Controls
Instructions
- Remove pull tab from battery compartment before use.
- Push the OFF ON button to turn caliper on.
- To toggle measurement between inches and millimeters, press in/mm button.
- With jaws closed, press ZERO to set readout to 0.
- To measure outside of object, set the bottom prongs outside object being measured. Slide the jaws together until they gently contact the item.
- To measure inside of object, set the top prongs inside object being measured. Spread prongs apart until they touch surface of object.
- When finished, press OFF ON to turn off Caliper.
- To replace battery, remove screw(s) and open battery compartment. Install new SR44 battery in correct polarity, close compartment and replace screw(s).
Note: Replacement parts are not available.
Note : Reference UPC 193175508225.
Outside Measurement
Depth Measurement
Inside Measurement
**Step Measurement
**
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>