WORRIOR 57646 12V Lithium Oscillating Multi Tool Kit Owner’s Manual

WARRIOR 57646 12V Lithium Oscillating Multi Tool Kit

IMPORTANT SAFETY INFORMATION

General Power Tool Safety Warnings

Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

   • Keep work area clean and well lit.
     Cluttered or dark areas invite accidents.

   • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

   • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

   • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

3. Personal safety

   • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

   • Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

   • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

   • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

   • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

   • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
     Loose clothes, jewelry or long hair can be caught in moving parts.

   • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

   • Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

   • Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.

   • Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.

   • When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.

   • Do not depress the spindle lock when starting or during operation.

   • Do not leave the tool unattended when the Battery Pack is connected. Turn off the tool, and remove the Battery Pack before leaving.

   • This product is not a toy. Keep it out of reach of children.

   • People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.

   • The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

4. Power tool use and care

   • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer
     at the rate for which it was designed.

   • Do not use the power tool if the switch does not turn it on and off. Any power
     tool that cannot be controlled with the switch
     is dangerous and must be repaired.

   • Disconnect the plug from the power
     source and/or remove the battery pack,
     if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
     Such preventive safety measures reduce the risk of starting the power tool accidentally.

   • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions
     to operate the power tool. Power tools are dangerous in the hands of untrained users.

   • Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

   • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

   • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

   • Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Service

   • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
   • Never service damaged BATTERY packs. Service of BATTERY packs should only be performed by the manufacturer or authorized service providers.
   • Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6. Safety instructions for Multi-Tool

7. Hold the power tool by insulated gripping surfaces only because the accessory may contact hidden wiring. Cutting a “live” wire may make exposed metal parts of the power tool “ live” and could give the operator an electric shock.

8. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against body leaves it unstable and may lead to loss of control.

9. Battery tool use and care

   • Prevent unintentional starting. Ensure the switch is in the off-position before connecting
     to battery pack, picking up or carrying the power tool. Carrying the power tool with your finger on the switch or energizing power tool that have the switch on invites accidents.

   • Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tool. Such preventive safety measures reduce the risk of starting the power tool accidentally.

   • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

   • Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

   • When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

   • Under abusive conditions, liquid may be ejected from the battery; avoid contact.
     If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

   • Do not use a battery pack or power tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

   • Do not expose a battery pack or power tool to fire or excessive temperature. Exposure to fire or temperature above 140°F may cause explosion.

   • Follow all charging instructions and do
     not charge the battery pack or power tool outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

   • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that
     the safety of the product is maintained.

   • Do not modify or attempt to repair the power tool or the battery pack except as indicated in the instructions for use and care.

   • The battery Charger gets hot during use. The Charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment. Do not place the Charger on a flammable surface. Do not obstruct any vents on the Charger. Especially avoid placing the Charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the Charger. Place the Charger on a stable, solid, nonflammable surface (such as a stable metal workbench or concrete floor) at least 1 foot away from all flammable objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area. Frequently monitor the Charger and Battery Pack while charging.

10. Lithium Battery Safety Warnings LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY AND WILL VENT FIRE OR EXPLODE
    IF MISTREATED:

11. Keep Battery Pack dry.

12. DO NOT DO ANY OF THE FOLLOWING
    TO THE BATTERY PACK:

  *         * Open,
    * Drop,
    * Short-circuit,
    * Puncture,
    * Incinerate, or
    * Expose to temperatures greater than 140°F.
3. Charge Battery Pack only according to its Charger’s instructions.
4. Inspect Battery Pack before every use; do not use or charge if damaged.

9. Vibration Safety
   This tool vibrates during use.
   Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

   • Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible.
   • Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.
   • Wear suitable gloves to reduce the vibration effects on the user.
   • Use tools with the lowest vibration when there is a choice.
   • Include vibration-free periods each day of work.
   • Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
   • To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.

Grounding

TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING :
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Extension Cords

Note: Extension cords must not be used with this item’s Charger.

Symbology

Specifications

Setup – Before Use

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Functions

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section.

Installing Attachments

1. Use the Hex Wrench to remove Cap Screw and Washer from end of the Spindle.

2. Install desired accessory (separate purchase) by placing the accessory’s mounting holes against the fitting pins on Spindle. See Figure A.
   CAUTION! TO PREVENT INJURY : When attaching the Scraper Blade, Wood Cutting Blade, or Half-Moon Cutting Blade, orient the accessory so that the blade faces AWAY from the handle. See Figure B.

3. Replace the Cap Screw and Washer while holding the accessory. Hold the Spindle with the wrench, then tighten securely using the Hex Wrench.

CAUTION! TO PREVENT INJURY: Make sure that the accessory is held securely in place by the four fitting pins on the Spindle as you tighten the Cap Screw.
Note: For sanding, first attach the Sanding Pad to the tool, then align a sheet of Sandpaper over the pad and press into place. Once a Sandpaper corner becomes worn, turn it 120° or replace the sheet with a new one.

Charging

Note: Battery must be charged before first use.

1. Place the Battery Pack on a dry fireproof surface in a room where the temperature is from 50–104° F.
   Note: If recharging a newly spent Battery Pack, allow it to cool completely before charging.

2. Examine the Battery Pack. It must be undamaged, and a Li-ion type Battery Pack.
   Do not charge a cracked, open, or leaking Battery Pack, or charge a non- recommended type of Battery Pack.

3. The Battery Pack’s terminals are designed to fit this Charger specifically. If the Battery Pack does to not fit the Charger properly, do not try to insert it. Do not force a Battery Pack into the Charger.

4. Plug the Power Supply into a grounded, 120VAC, 60Hz receptacle.

5. Connect the Power Supply to the Charger.

Workpiece and Work Area Set Up

1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps (not included) to prevent movement while working.

General Operating Instructions

1. 1. Make sure that the Trigger is in the off-position, then attach the Battery Pack.  

   Note: The Battery Pack fits into the Tool housing only one way. Match up the shape of the tool with the shape of the housing opening. The Battery Pack should slide easily into the housing.
   CAUTION! Do not force it into the Tool.

2. old the Tool with both hands and slide the Power Switch forward to activate it.

3. Adjust the Speed Control Knob to one of six different speeds (1-6). “1″ is the lowest oscillation and “6’’ is the highest. Use high oscillation
   (5-6) for work with the Scraper Blade.
   NOTE : Conduct a test run on a scrap workpiece to determine the correct speed for job.

4. Do not allow contact between the accessory and workpiece until tool is at full speed.

5. Avoid contact with foreign objects such as metal screws and nails when sanding, scraping, or cutting.

6. Do not apply excessive pressure on the Tool. Allow the Tool to do the work.

7. When finished, slide the Power Switch to OFF. Allow the tool to stop completely before setting it down.

8. To prevent accidents, turn off the tool and remove its Battery Pack after use. Clean, then store the tool indoors out of children’s reach.

Maintenance and Servicing Instructions

Procedures not specifically explained in this manual must be performed only by a qualified technician.

Warning:

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1. BEFORE EACH USE, inspect the general condition of the tool. Check for:
   • leaking, swollen, or cracked battery pack,
   • loose hardware,
   • misalignment or binding of moving parts,
   • cracked or broken parts, and
   • any other condition that may affect its safe operation.
2. AFTER USE, wipe the external surface of the tool with a clean cloth.
3. Li-Ion BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.Do not short, incinerate or open the battery.
4. Disconnect the battery pack and store the battery pack, charger, and tool in dry, indoor area out of reach of children and away from metal objects (i.e., paperclips, coins) to prevent shorting.

Troubleshooting

2.    Battery Pack not properly charged.

3.    Battery Pack burnt-out.

4.    Internal damage or wear. (Carbon brushes or Trigger, for example.)

| 1.    Remove Battery Pack, make sure there are no obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.

2.    Make sure Charger is connected and operating properly. Give enough time for Battery Pack to recharge properly.

3.    Dispose of old Battery Pack

properly or recycle. Replace Battery Pack.

4.    Have technician service tool.

Tool operates slowly.| 1.    Forcing tool to work too fast.

2.    Battery Pack wearing out.

| 1.    Allow tool to work at its own rate.

2.    Dispose of old Battery Pack

properly or recycle. Replace Battery Pack.

Performance

decreases over time.

| Carbon brushes worn or damaged.| Have qualified technician replace brushes.
Excessive noise

or rattling.

| Internal damage or wear. (Carbon

brushes or bearings, for example.)

| Have technician service tool.
Overheating.| 1.    Forcing tool to work too fast.

2.    Blocked motor housing vents.

| 1.    Allow tool to work at its own rate.

2.    Wear ANSI-approved safety goggles and NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect Battery pack and charger power supply before service.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>